Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Follow Steps 1 through 2 in the “How to set up automatically” procedure. 2. Select the IP Settings on network test screen. 3. Set IP Mode to Manual. 4. Press the d button on your remote to go to the IP Address. . . IP Settings IP Mode Manual DNS Mode Manual DNS Server 0 . 0 . 0 . 0 IP Address 0 . 0 . 0 . 0 Subnet Mask 0 . 0 . 0 . 0 Gateway 0 . 0 . 0 . 0 OK English 5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7. The network test screen appears, and network setting is done. .. English ¦ Connecting to a Wireless Network for LED 6300 series and under To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN-sold separately) , which you connect to your TV’s back or side panel USB port. See the illustration below. .. The LAN Port on the Wall LAN Cable Wireless IP sharer (router having DHCP server) TV Rear Panel Samsung Wireless LAN adapter English Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not be played smoothly. N NOTE . You must use the “Samsung Wireless LAN adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless network. . . Samsung Wireless LAN adapter and The USB extension Cable are sold . separately and are offered by select retailers, Ecommerce sites and Samsungparts.com. English . To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. . Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure. . If you apply a security system other than the systems listed below, it will not work with the TV. . . English . If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with new Wi- Fi certification specifications. . If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. . If your router, modem, or device is not certified, it may not connect to the TV . . via the “Samsung Wireless LAN adapter.” English . Connection Methods: You can setup the wi...
Dieses Handbuch ist für folgende Modelle:Fernseher - UA46D6000SW (8.13 mb)
Fernseher - UE37D6120SW (8.13 mb)
Fernseher - UA40D6600WS (8.13 mb)