Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The video is OK but there is no audio. •If you are using an HDMI connection, check the audio output setting on your PC. Issues Solutions and Explanations PC Connection A “Mode Not Supported” message appears. •Set your PC’s output resolution so it matches the resolutions supported by the TV. “PC” is always shown on the source list, even if a PC is not connected. •This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected. The video is OK but there is no audio. •If you are using an HDMI connection, check the audio output setting on your PC. Issues Solutions and Explanations PC Connection . Network Connection for PDP 550 and 570 Series . • The Samsung Wireless USB dongle is required to use a wireless The wireless network connection failed. network. • Make sure the Network Connection is set to Wireless. • Make sure the TV is connected to a wireless IP sharer (router). English Issues Solutions and Explanations Issues Solutions and Explanations Others The picture won’t display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. • Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. • Adjust the picture size options on your external device or TV to full screen. Plasma TV is making humming noise. . • Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that are used to create the images on the screen. . • If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness lower. • You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface. Also try rerouting your connection cables. • Improper installation of wall mount can create excessive noise. English Issues Solutions and Explanations Image Retention (Burn In) Issue. • To minimize the possibility of screen burn, this unit is equipped with screen burn reduction technology. Pixel Shift technology enables you to set picture movement up / down (Vertical Line) and side to side (Horizontal Dot). A “Mode Not Supported” message appears. • Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to the resolution settings in the user manual. There is a plastic smell from the TV. • This smell is normal and will dissipate over time. The TV Signal Information is unavailable in the Self Diagnosis Test menu. • This function is only available with digital channels from an Antenna / RF / Coax connection. The TV is tilted to the side. • Remove the base stand from the TV and reassemble it. The channel menu is greyed out (unavailable). • The Channel menu is only available when the TV source is selected. . . English Issues Solutions and Explanations Your settings are lost after 30 minutes or every time the TV is turned off. • If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the SOURCE button to select TV mode, and go to MENU > System > Plug & Play > ENTERE. You have intermittent loss of audio or video. • Check the cable connections and reconnect them. • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90 degree connectors. You see small particles when you look closely at the edge of the frame of the TV. • This is part of the product’s design and is not a defect. . . English Issues Solutions and Explanations The message “Scramble signal” or “Weak Signal / No Signal” appears. • If you are using a CAM CARD (CI / CI+), check that it is installed into the common interface slot. • If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again. The PIP menu is not available. • PIP functionality is only available when you are using a HDMI, PC or Component source. You turned the TV off 45 minutes ago, and it turned on again. • It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching TV. There are recurrent picture sound issues. • Check and change the signal/source. A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture. • To prevent this, use felt pads on any surface of the ...
Dieses Handbuch ist für folgende Modelle:Fernseher - PS43D450A2W (3.3 mb)
Fernseher - PS43D451A3W (3.3 mb)
Fernseher - PS43D452A5W (3.3 mb)
Fernseher - PS43D455A2W (3.3 mb)