Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
(You can also change the reservation information.) ¦ Select All/Deselect All: Select or deselect all reserved programmes. FineTune (analogue channels only) If the signal is weak or distorted, fine tune the channel manually. . Fine tuned channels are marked with an asterisk “*.” . To reset the fine-tuning, select Reset. Picture Menu ¦ Changing the Preset Picture Mode Mode Select your preferred picture type. ¦ Dynamic: Suitable for a bright room. ¦ Standard: Suitable for a normal environment. ¦ Movie: Suitable for watching movies in a dark room. ¦ Adjusting Picture Settings P.MODE Cell Light/Contrast/Brightness/ Sharpness/Colour/Tint (G/R) Your television has several setting options for picture quality control. . NOTE • In analogue TV, Ext., AV modes of the PAL system, the Tint(G/R) function is not available. • Settings can be adjusted and stored for each external device connected to the TV. ¦ Economical Solutions Eco Solution ¦ Energy Saving (Off/Low/Medium/High/ Picture Off) t : This adjusts the brightness of the TV in order to reduce power consumption. If you select Picture Off the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen. Until the screen turns on again, a distorted picture will be displayed for about 4 seconds. ¦ Eco Sensor (Off/On): To enhance your power savings; the picture settings will automatically adapt to the light in the room. . If you adjust the CellLight, the EcoSensorwill be set to Off. Min Cell Light: When Eco sensor is On, the minimum screen brightness can be adjusted manually. . If EcoSensoris On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity. ¦ No-Signal PowerOff(Off/15min/30min/60min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it's not receiving a signal. ¦ Changing the Picture Options Advanced Settings (available in Standard/Movie mode) You can adjust the detailed setting for the screen including colour and contrast. Advanced Settings Black Tone : Off > Dynamic Contrast : Medium Gamma : 0 RGB Only Mode : Off Colour Space : Native White Balance Flesh Tone : 0 Ў UMove E Enter R Return 14 English ¦ BlackTone (Off/Dark/Darker/Darkest): Select the black level to adjust the screen depth. ¦ Dynamic Contrast (Off/Low/Medium/High): Adjust the screen contrast. ¦ Gamma: Adjust the primary colour intensity. ¦ RGBOnly Mode(Off/Red/Green/Blue): You can adjust Colour or Tint (G/R) of Red, Green or Blue for the picture from an external device (DVD player, home theatre, etc.). ¦ Colour Space (Auto/Native): Adjust the range of colours available to create the image. ¦ White Balance: Adjust the colour temperature for a more natural picture. R-Offset/G-Offset/B-Offset: Adjust each colour’s (red, green, blue) darkness. R-Gain/G-Gain/B-Gain: Adjust each colour’s (red, green, blue) brightness. Reset: Resets the White Balance to it’s default settings. ¦ FleshTone: Emphasize pink “Flesh Tone.” ¦ Edge Enhancement (Off/On): Emphasize object boundaries. Picture Options Picture Options Colour Tone : Normal > Size : Auto Wide Screen Mode : 16:9 Digital Noise Filter : Auto MPEG Noise Filter : Auto HDMI Black Level : Normal Film Mode : Off Ў U Move E Enter R Return ¦ ColourTone (Cool/Normal/Warm1/Warm2) . Warm1 or Warm2will be deactivated when the picture mode is Dynamic. . Settings can be adjusted and stored for each external device connected to an input on the TV. ¦ Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. 03 Basic Features P.SIZE 16:9 : Adjusts the picture size to 16:9 for DVDs or wide broadcasting. Wide Zoom: Magnifies the picture size more than 4:3. . Adjusts the Position by using ^, Ў buttons. Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. . Adjusts the Position or Size by using ^, Ў button. 4:3 : The default setting for a movie or normal broadcasting. . Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. . NOTE • Depending on the input source, the picture size options may vary. • The available items may differ depending on the selected mode. • Settings can be adjusted and stored for each external device connected to an input on the TV. • After selecting ScreenFitin HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Adjusts the Position or Size by using ^, Ў, <, > button. • If you use the ScreenFit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function. ¦ Screen Mode (16:9 / Wide Zoom / Zo...
Dieses Handbuch ist für folgende Modelle:Fernseher - PS42C435A1W (13.79 mb)
Fernseher - PS42C450B1W (13.79 mb)
Fernseher - PS50C430A1W (13.79 mb)
Fernseher - PS50C435A1W (13.79 mb)