Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
7 When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing. English-20 Fine Tuning Channel Reception If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however, the signal is weak or distorted, you may have to fine-tune the channel manually. Select the channel that you want to fine tune. Press the MENU button. Result: The main menu is displayed. Press the or button to select Channel. Press the ENTER button. Result: The options available in the Channel group are displayed. Press the or button to select Fine Tune. Press the ENTER button. Result: The horizontal bar is displayed. Press the or button to reach the required setting. Press the ENTER button. Result: An asterisk “*” appears on the right-hand side of the channel number. The channel number becames red. To reset the fine-tuning, select Reset by pressing the or button and then press the ENTER button. When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing. Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner. And the channel number becames red. English-21 Changing the Picture Standard ou can select the type of picture which best corresponds to your viewing requirements. Press the MENU button. Result: The main menu is displayed. Press the or button to select Picture. Result: The options available in the Picture group are displayed. Press the ENTER button. Press the ENTER button again. Result: The options available in the Mode group are displayed. Press the ENTER button. Result: The Mode is selected. 6 Select the required picture effect by pressing the or button repeatedly. Result: The following picture effects are available: Dynamic - Standard - Movie - Custom 7 When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing. You can also display by simply pressing the P.MODE (Picture Mode) button. English-22 Adjusting the Custom Picture Your set has several settings which allow you to control picture quality. Press the MENU button. Result: The main menu is displayed. Press the or button to select Picture. Result: The options available in the Picture group are displayed. Press the ENTER button. Press the ENTER button again. Result: The options available in the Mode group are displayed. Select the option (Contrast, Brightness, Sharpness, Colour, Tint) to be adjusted by pressing the or button. Press the ENTER button. Result: The horizontal bar is displayed. Press the or button to reach the required setting. Press the ENTER button. When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing. Each adjusted setting will be stored separately according to its input mode. The Tint is "inactivated" as following cases. • Analog mode (RF, Scart, Video, S-Video) In case of an input signal setting to PAL-50, PAL-CN, and SECAM. • Component, DVI, and HDMI mode In case of an input signal setting to 60HZ; 480i, 480p, 720p @60Hz, 1080i @60Hz. English-23 Changing the Colour Tone You can select the most comfortable colour tone to your eye. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Picture. Result: The options available in the Picture group are displayed. 3 Press the ENTER button. 4 Press the ENTER button again. Result: The options available in the Mode group are displayed. 5 Press the or button to select Colour Tone and press the ENTER button. Select the required option by pressing the or button repeatedly. Press the ENTER button. Result: The following options are available: Cool2 - Cool1 - Normal - Warm1 - Warm2 6 When you are satisfied with your choice, press the EXIT button to return to normal viewing. Resetting the Picture Settings to the Factory Defaults You can return to the factory defaults picture settings. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the Result: or button to select Picture. The options available in the Picture group are displayed. 3 Press the ENTER button. 4 Press the ENTER button again. Result: The options available in the Mode group are displayed. 5 Press the ENTER or buttons to select Reset, then press the button. 6 Press the EXIT button to return to normal viewing. English-24 Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. Press the MENU button. Result: The main menu is displayed. Press the or button to select Picture. Result: The options available in the Picture group are displayed. Press the ENTER button. Press the or button to select Size and press the ENTER button. Select the required opt...
Dieses Handbuch ist für folgende Modelle:Fernseher - LE32R51B (11.95 mb)
Fernseher - LE40R51B (11.95 mb)