Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
N The message The existing network system may have limitedfunctionality. Do you want to change the network connection? is displayed. . Input the generated Network Name(SSID) and Security Key into the device you want to connect. How to connect an existing Ad-hoc device . Choose Select a network, the device list is displayed. . Select the device you want in the Device list. . If security key was applied, input the security key again. N If network doesn’t operate normally, please check the Network Name(SSID) and Security Key again. If the Security Key is incorrect, it may be the reason for the malfunction. Wireless Network Setup-Auto If you want to connect AP, AP should support DHCP. Only devices which support Ad-hoc mode can be connected without DHCP. . Set Network Type to Wireless. . Select Wireless Network Setup. . Set Internet Protocol Setup to Auto. N The Internet Protocol is set automatically. . Select a network through Select a network. . Select Network Test to check the network connectivity. Wireless Network Setup-Manual . Set Network Type to Wireless. . Select Wireless Network Setup. . Set Internet Protocol Setup to Manual. . Set up IP Address, Subnet Mask, Gateway and DNS Server. N Press the number buttons on the remote control when you set the Network manually. . Select a network through Select a network. . Select Network Test to check the network connectivity. Theexistingnetworksystemmayhavelimitedfunctionality.Doyouwanttochangethenetworkconnection? YesNo InternetProtocolSetup :Auto . NetworkTestSelectanetwork:AP1U MoveE SelectR ReturnWirelessNetworkSetupIPAddress : SubnetMask : Gateway : DNSServer : InternetProtocolSetup :Manual . NetworkTestSelectanetwork:AP1U MoveE SelectR ReturnWirelessNetworkSetupIPAddress :0000SubnetMask :0000Gateway :0000DNSServer :0000 English - INPUT / SUPPORT ¦ Input Menu . Source List Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. O Press the SOURCE button on the remote control to view an external signal source. TV mode can be selected by pressing the TV button. ¦ TV / AV / AV / Component / Component / PC / HDMI / HDMI / HDMI /DVI / HDMI / USB N You can choose only those external devices that are connected to the TV. In the Source List, connected inputs will be highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom. N If USB devices are connected to the USB (HDD) and USB jacks, they are displayed as USB1 and USB2 in order. N Using the Colour buttons on the remote with the Source list . Red (Refresh): Refreshes the connected external devices. Press this if your Source is on and connected, but does not appear in the list. . TOOLS (Tools): Displays the Edit Name and Information menus. N PC always stays activated. . Edit Name ¦ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV / Blu-ray / HD DVD / DMA Name the device connected to the input jacks to make your input source selection easier. N When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN (DVI) port, you should set the HDMI /DVI mode to DVI PC in the Edit Name of the Input mode. N When connecting an HDMI/DVI cable to the HDMI IN (DVI) port, you should set the HDMI /DVI mode to DVI or DVI PC in the Edit Name of the Input mode. In this case, a separate sound connection is required. ¦ Support Menu SourceList EditNameInputRefreshT ToolsSourceListTVPC : AV1 :---- AV2 :---- Component1 :---- Component2 :---- . Product Guide The Product Guide gives you information on the most important features of this TV. The descriptions provided by this function are in English only. Picture Quality Full HD 0 0p 00Hz Motion Plus Picture Mode Medi@ .0 Internet@TV-Content Service Content Library Flash USB .0 Movie DLNA Wireless Eco-Friendly Energy Saving Mode Eco Material Using the Remote Control Buttons in the Product Guide Menu ProductGuide . SelfDiagnosisSoftwareUpgradeHDConnectionGuideContactSamsungSupport Button Operations Yellow Button Shows the contents of the Product Guide sequentially. (Auto Play) Move the cursor and select an item. ENTERE Select the currently selected item. RETURN Return to the previous menu. EXIT Stop the current function and return to the Product Guide main menu. English - SelfDiagnosisU MoveE EnterR ReturnPictureTest . SoundTestSelfDiagnosisU MoveE EnterR ReturnPictureTest . SoundTest . Self Diagnosis ¦ Picture Test If you think you have a picture problem, perform the picture test. Check the colour pattern on the screen to see if the problem still exists. . Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the TV. Therefore, contact Samsung’s call centre for assistance. . No: If the test pattern is properly displayed, select No. There may be a problem with your external equipm...
Dieses Handbuch ist für folgende Modelle:Fernseher - LA32B650T1R (7.06 mb)
Fernseher - LA40B650T1R (7.06 mb)
Fernseher - LA46B650T1R (7.06 mb)