Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Fotos und technische Daten Sony KDL-40HX853 |
Dieses Gerät hat auch andere Anweisungen:
Fernseher - KDL-40HX853 (24.88 mb)
Fernseher - KDL-40HX853 (21.76 mb)
Fernseher - KDL-40HX853 (3.74 mb)
Anleitung Zusammenfassung
32 Precautions......................................................................................... 34 5 GB Inserting batteries into the remote Inserting batteries into the remote Remote (1) Size AAA batteries (R03 type) (2) Operating Instructions (this manual) and other documents KDL-65/55HX95x: Table-Top Stand (1)*1 (KDL-55HX95x only) Fixing screws for Table-Top Stand (M5 . 16) (3) (KDL-55HX95x only) Assembling screws for Table-Top Stand (M5 . 16) (4) (KDL-55HX95x only) 3D Glasses (battery included) (2) Pouch for 3D Glasses (2) Camera and Microphone Unit (1) KDL-55/46/40HX85x: TV Stand (1) Joint (1) Neck (1) TV Stand Neck Attachment Screw (M5 . 16) (3) Joint Screw (M5 . 16) (3) Neck Screw (M5 . 16) (4) *1 Refer to the supplied Table-Top Stand leaflet to assemble the Table-Top Stand. 1 Remove the protection sheet. 2 Push and slide the cover to open. 6 GB 1: 1: Stand (except KDL-65HX95x) ~ • Be sure to have a Phillips screwdriver that fits the screws prior to the assembly. 12 cm ~ • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. KDL-55HX95x Refer to the supplied Table-Top Stand leaflet for proper attachment. 1 Place the TV set on the Table-Top Stand. Guide pins ~ •Align the TV from the top, slide it in until the guide pins cannot be seen. 2 Fix the TV to the Table-Top Stand using the supplied screws. The arrow marks indicate the location of the screw holes used for securing the Table-Top Stand. Getting Started KDL-55/46/40HX85x 1 Attach the Neck to the TV Stand. Neck Screw (M5 . 16) Neck 2 Prepare the TV. ~ •When moving the TV, be sure that two or more persons install the TV on the TV Stand as shown in the illustration. If one person does the installation work alone, this may result in an accident or injury. (Continued) 7 GB 3 3 . TV. Slide the supplied Joint up to attach. Guide pins Soft cloth Arrow direction shows front of the TV Stand ~ • When installing the TV on the TV Stand, hold the TV as shown in the illustration and install it on the two brackets of the TV Stand. • Be careful not to pinch your hands or the AC power cord (mains lead) when you install the TV to the TV Stand. 5 Secure the TV and the TV Stand. ~ • Lay the display face down on a stable work surface that is larger than the display. • To prevent damaging the surface of the TV Stand Neck Attachment LCD display, make sure to place a soft Screw (M5 . 16) cloth on the work surface. Joint Screw (M5 . 16) Joint Soft cloth 8 GB Detaching the Table-Top Stand/TV Stand from the TV ~ • Do not remove the Table-Top Stand/TV Stand for any reason other than to install corresponding accessories on the TV. • When removing the Table-Top Stand/TV Stand from the TV, lay the display face down on a stable work surface that is larger than the TV. • To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface. • Be sure the TV is on the vertical position before switching on. TV set must not powered on with LCD panel face down to avoid uneven picture uniformity. KDL-55HX95x KDL-65HX95x To detach the Table-Top Stand from the TV, remove the screws fixed in step 2 (page 7). To detach the Table-Top Stand from the TV, Getting Started Soft cloth remove the screws at the head of the Table-Top Stand. Slide upward to remove the head. Then, remove the screws fixed on the Table-Top Stand. Soft cloth Head Soft cloth (Continued) 9 GB KDL-55/46/40HX85x KDL-55/46/40HX85x the screws fixed in step 3 & 5 (page 8). TV Stand Neck Attachment Screw (M5 . 16) Soft cloth Joint Screw (M5 . 16) Joint 2: Adjusting the viewing angle of the TV This TV can be adjusted within the angles as illustrated. x Angle adjustment (Swivel) (KDL-55HX95x only) ~ • When adjusting the angle, hold the stand with one hand to avoid having the stand slip or TV tip over. *15° *15° *15° *15° x Angle adjustment (Tilt) (KDL-55HX95x only) *6° • Ensure that there are no objects in front of the TV. 3D Sync Transmitter IR Sensor * The angle is approximate value. ~ 10 GB x x 3: Connections (e.g. DVD recorder) with HDMI ~ • Use an antenna cable connector no greater than 14 mm in thickness. • Use an HDMI cable connector within 12 mm (thickness) . 21 mm (width). Connecting an antenna (aerial)/Set Top Box/ recorder (e.g. DVD recorder) x To connect a Set Top Box/recorder (e.g. DVD recorder) with SCART Getting Started Set Top Box/recorder (e.g. DVD recorder) Set Top Box/recorder (e.g. DVD recorder) ~ • Right Angle Type Universal SCART Lead is recommended for this connection. (Continued) 11 GB Connecting audio/video devices Connecting audio/video devices Audio/video device Connecting the TV with a Speaker Integrated Stand to the TV Stand (KDL-55/ 46/40HX85x only) Speaker Integrated Stand 1 Connect the cable of the TV Stand to the Speaker Integrated Stand jack on the rear of the TV. 2 Set to “Speaker Integrated Stand” in “TV Position” menu. Press HOME, then select “Settings” t “Sound” t “TV Position” t “Speaker Integrated Stand”. 12 GB KDL-55...
Dieses Handbuch ist für folgende Modelle:Fernseher - KDL-46HX753 (3.76 mb)
Fernseher - KDL-55HX853 (3.76 mb)