Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Refer to qualified service personnel only. To prevent fire or shock hazard, do not expose the TV to rain or moisture. For your own safety, do not touch any part of the TV, power lead or aerial lead during lightning storms. Do not cover the ventilation openings of the TV For ventilation, leave a space of at least 10cm all around the set. Never place the TV in hot, humid or excessively dusty places. Do not install the TV where it may be exposed to mechanical vibrations. To prevent fire, keep inflammable objects or naked lights (eg candles) away from the TV. Clean the TV with a soft, lightly dampened cloth. Do not use benzine, thinner or any other chemicals to clean the TV. Do not scratch the TV screen. As a safety precaution, unplug the TV before cleaning it. Pull out the power lead by the plug. Do not pull on the power lead itself. Take care not to place heavy objects on the power lead as this could result in damage. We recommend you wind any excess lead around the holders provided on the rear of the TV. Place the TV on a secure stable stand. Do not allow children to climb on to it. Do not place the TV on its side or face up. Do not cover the ventilation openings of the TV with items such as curtains or newspapers etc. Safety Information Never push objects of any kind into the set as this could result in a fire or electric shock. Never spill liquid of any kind on the set. If any liquid or solid object does fall through, do not operate the TV. Have it checked immediately by qualified personnel. For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. Disconnect from the mains. This set is to operate on a 220- 240V AC supply only. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. Unplug the power lead before moving the TV. Avoid uneven surfaces, quick steps or excessive force. If the set has been dropped or damaged, have it checked immediately by qualified service personnel. Overview of Remote Control Buttons VCR or DVD on/off Press to switch your VCR or DVD on or off. Selecting channels If Media Selector is switched on TV or VCR, press to select channels. For double-digit programme numbers, enter the second digit within 2.5 seconds. Displaying on Screen information Press to display all on-screen indications. Press again to cancel. Selecting Picture mode Press repeatedly to change the picture mode. Selecting sound mode Press repeatedly to change the sound mode. This button only works in Teletext mode. Selecting TV mode Press to switch off teletext or video input. a) If Media Selector is switched on TV: • When MENU is switched on, use these buttons to operate the menu system. For details refer to “Introducing and Using the Menu System” on page 9. • When MENU is switched off, press OK to show a channel overview. Then press or to select the channel and then press again the OK button to watch the selected channel. b) If Media Selector button is switched on VCR or DVD: Using these buttons you can control the main functions of your VCR or DVD. Displaying the menu system Press to display the menu on the TV screen. Press again to remove the menu display from the TV screen. Adjusting TV volume Press to adjust the volume of the TV. Muting the Sound Press to mute TV sound. Press again to restore the sound. To Temporarily Switch Off TV Press to temporarily switch off TV (the standby indicator on TV lights up). Press again to switch on TV from standby mode. To save energy we recommend switching off completely when TV is not in use. After 15 minutes without a signal and without any button being pressed, the TV switches automatically into standby mode. Selecting input source Press repeatedly until the desired input symbol of the source appears on the TV screen. a) If Media Selector button is switched on TV: Press to watch the last channel selected (watched for at least 5 seconds). b) If Media Selector button is switched on VCR: For Sony’s VCR double-digit programme numbers, e.g. 23, press -/- - first and then the buttons 2 and 3. GB Selecting Screen format Press to view programmes in 16:9 mode. Press again to return to 4:3 mode. Selecting Teletext Press to switch on teletext. Recording button If Media Selector is switched on VCR, press this button to record programmes. Media Selector With this remote control you can operate not only this TV but also the main functions of your VCR or DVD. Switch on the device you want to operate and next press this button repeatedly to select the VCR, TV or DVD. A green light will be lit momentarily. An initial set up is required to synchronise this remote control to your VCR or DVD. It will depend on the Brand of those products. For more details, refer to chapter “Remote Control Configuration for VCR or DVD” on page 20. Selecting channels Press to select the next or previous channel. Besides TV functions, all coloured buttons as well as green symbols are also used f...
Dieses Handbuch ist für folgende Modelle:Fernseher - FD Trinitron KV-29LS35B (2.48 mb)