Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
~ • Observe the correct polarity when inserting batteries. • Do not use different types of batteries together or mix old and new batteries. • Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of batteries. Please consult your local authority. • Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it. • Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room. 2: Attaching the stand Follow the assembling steps required to place on a TV stand. 1 Take out the Table-Top Stand and screws from the carton. The screws are found in the accessory bag. KDL-32S55xx/KDL-32P35xx/KDL-26S55xx Accessory bag Screws KDL-22S55xx TV unit Table-Top Stand Accessory bag Screws TV unit Table-Top Stand 2Gently slide the TV unit onto the neck of the Table-Top Stand and align the screws holes. KDL-32S55xx/KDL-32P35xx/KDL-26S55xx Rear of TV 4 GB KDL-22S55xx Rear of TV KDL-22S55xx Rear of TV ~ • When you carry the TV, place your hand as illustrated and hold it securely, see page 9. Do not put stress on the LCD panel and the frame around the screen. • Be careful not to pinch your hands or the mains lead when you install the TV to the Table-Top Stand. 3 Use the supplied screws to attach the TV unit to the Table-Top Stand. KDL-32S55xx/KDL-32P35xx/KDL-26S55xx Screws 3: Connecting an aerial/VCR/DVD recorder ~ • This product has been tested and found to compliant with the limits set out in the EMC Directive for using connection cables not longer than 3 meters (9.8 feet). Connecting an aerial only Coaxial cable Connecting an aerial/VCR/DVD recorder with SCART Start- up Guide KDL-22S55xx Screws ~ • If an electric screw driver is used, set the torque to tighten at approximately 1.5 N·m {15 kgf·cm}. AV1 AV2 Scart lead VCR/DVD recorder Coaxial cable Coaxial cable ~ • AV1 outputs available only for analogue TV. • AV2 outputs to the current screen (except PC, HDMI, Component 1080i). Continued 5 GB Connecting an aerial/VCR/DVD recorder with HDMI Connecting an aerial/VCR/DVD recorder with HDMI Preventing the TV KDL-32S55xx/KDL-32P35xx/KDL-26S55xx from toppling over 1 IN 2 HDMI cable Coaxial cable Coaxial cable 2 1 3 VCR/DVD recorder KDL-22S55xx IN 1 HDMI cable Coaxial cable Coaxial cable VCR/DVD recorder 6 GB 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2 Install a machine screw (M4 . 14 mm, not supplied) and a nut (M4, not supplied) from the bottom of the Table-Top Stand into the screw hole of the TV. Adjust a strong cord line weight accordingly, to secure the machine screw and nut. ~ • Be sure to secure a machine screw and a nut. 3 Tie the wood screw and the machine screw with a strong cord. 5: Bundling the cables You can bundle the connecting cables as illustrated below. 1 2 3 ~ • Do not bundle the mains lead with other connecting cables. 6: 6: KDL-22S55xx only This TV can be adjusted within the angle shown below. Adjust the angle back and forth (tilt) 3° 8° Right view Front 7: Selecting the language, country/region and location RETURN TOOLS GUIDE MENU AUDIO SCENEANALOGDIGITAL 3,4,5 ~ • When you turn on the TV, the power indicator light up in green. 3 Press F/f to select the language displayed on the menu screens, then press . Select: Confirm: Language Country Location English Nederlands Italiano Deutsch Auto Start-up 4 Press F/f to select the country/region in which you will operate the TV, then press . Select:Back: Confirm: Language Country Location - United Kingdom Ireland Nederland Luxembourg France Italia Auto Start-up If the country/region which you want to use on the TV does not appear in the list, select “-” instead of a country/region. 5 Press F/f to select the location type in which you will operate the TV, then press . Language Country Location Home Shop Select:Back: Confirm: Auto Start-up Start- up Guide In Shop mode, some settings will be periodically 1 Connect the TV to your mains socket reset for Shop usage. (220-240V AC, 50Hz). 2 Press 1 on the side of the TV. This option selects the initial picture mode appropriate for the typical lighting condition in When you turn on the TV for the first time, the Language menu appears on the screen. these environments. 7 GB 8: 8: V 1 Before you start auto-tuning the TV, insert a pre-recorded tape into the VCR connected to the TV (page 5) and start play back. The video channel will be located and stored on the TV during auto-tuning. If no VCR is connected to the TV, skip this step. 2 Press . Back: Start: Do you want to start Auto Tuning? Auto Tuning The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while proceeding. If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial connections and press to start auto-tuning again. 3 When the Programme So...
Dieses Handbuch ist für folgende Modelle:Fernseher - KDL-26P5500 (3.67 mb)
Fernseher - KDL-32P3500 (3.67 mb)
Fernseher - KDL-32P5500 (3.67 mb)
Fernseher - KDL-26S5500 (3.67 mb)