Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Fotos und technische Daten Sony KDL-19L4000 |
Dieses Gerät hat auch andere Anweisungen:
Fernseher - KDL-19L4000 (12.35 mb)
Fernseher - KDL-19L4000 (20.81 mb)
Anleitung Zusammenfassung
To select options in “Settings”, see “Navigating through menus” (page 21). Screen Screen (only in PC mode) Changes the screen format. Screen Format For details about the screen format, see page 14. z “Auto” is available for PAL and SECAM signals only. “Normal”: Displays the picture in its original size. “Full”: Enlarges the picture to fill the display area. Power Saving Selects the power saving mode to reduce the power consumption of the TV. “Standard”: Default settings. “Reduce”: Reduces the power consumption of the TV. “Picture Off”: Switches off the picture. You can listen to the sound with the picture off. Using MENU Functions RGB Centre Adjusts the horizontal picture position so that the picture is in the middle of the screen. z This option is only available if an RGB source has been connected to the Scarts connectors / / AV1 or / / AV2 on the rear of the TV. PC Adjustment Customizes the TV screen as a PC monitor. z This option is only available if a PC signal is received. “Phase”: Adjusts the screen when a part of a displayed text or image is not clear. “Pitch”: Enlarges or shrinkes the screen size horizontally. “Horizontal Shift”: Moves the screen to the left or to the right. “Vertical Shift”: Moves the screen up or down. “Power Saving”: When this is set to “On,” turns to standby mode if no PC signal is received. To return to the TV, press ?/1. “Reset”: Resets to the factory settings. Continued 25 GB Timer Sets the timer to turn off the TV. Sleep Timer Sets a period of time after which the TV automatically switches itself into standby mode. When the “Sleep Timer” is activated, the (Sleep Timer) indicator on the TV front panel lights up in orange. z • When you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”. • A notification message appears on the screen one minute before the TV switches to standby mode. 26 GB Set-up menu Auto Start-up Language Auto Tuning Programme Sorting English AV Preset HDMI Set-up Sound Offset Manual Programme Preset Digital Set-up Select:Back: Enter: Exit: Set-up You can select the options listed below on the “Set-up” menu. To select options in “Settings”, see “Navigating through menus” (page 21). Auto Start-up Starts the initial set-up to select the language, country/region and location, and tune in all available digital and analogue channels. Usually, you do not need to do this operation because the language and country/region will have been selected and channels already tuned when the TV was first installed (page 7). However, this option allows you to repeat the process (e.g., to retune the TV after moving house). Language Selects the language in which the menus are displayed. Auto Tuning Tunes in all the available analogue channels. Usually you do not need to do this operation because the channels are already tuned (Only in when the TV was first installed (page 7). However, this option allows you to repeat analogue mode) the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). Programme Changes the order in which the analogue channels are stored on the TV. 1 Press F/f to select the channel you want to move to a new position, Sorting then press g. (Only in 2 Press F/f to select the new position for your channel, then press . analogue mode) AV Preset Assigns a name to any equipment connected to the side and rear sockets. The name will be displayed briefly on the screen when the equipment is selected. You can skip an input source that is not connected to any equipment. 1 Press F/f to select the desired input source, then press . 2 Press F/f to select the desired option below, then press . • AV1 (or AV2/AV3/HDMI1/HDMI2/Component/PC), VIDEO, DVD, CABLE, GAME, CAM, SAT: Uses one of the preset labels to assign a name to connected equipment. • “Edit”: Creates your own label. 1 Press F/f to select the desired letter or number (“_” for a blank space), then press g. If you input a wrong character Press G/g to select the wrong character. Then, press F/f to select the correct character. 2 Repeat the procedure in step 1 until the name is completed, then press . Continued 27 GB Using MENU Functions HDMI Set-up Allows the TV to communicate with equipment that is compatible with the control for HDMI function, and connected to the HDMI sockets of the TV. Note that communication settings must also be made on the connected equipment. “Control for HDMI”: Sets whether or not to link the operations of the TV and the connected equipment that is compatible with control for HDMI. “Auto Devices Off”: When this is set to “On”, the connected equipment that is compatible with control for HDMI turns off when you switch the TV to standby mode using the remote. “Auto TV On”: When this is set to “On”, the TV turns on when you turn on the connected equipment that is compatible with control for HDMI. “Device List Update”: Creates or updates the “HDMI Device List”. Up to 11 compatible equipment items can be connected, ...