Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
886 x 592 x 620mm Weight Approx. 70kg Rear Terminals 121-pin Euro connector (CENELEC standard) including audio/video input, RGB input, TV audio/video output. 2 21-pin Euro connector (CENELEC standard) including audio/video input, RGB input, TV audio/video output. 21-pin Euro connector (CENELEC standard) s 33including audio/video input, S-video input, selectable audio/video output. Audio outputs - phono jacks MODEM Modem connection DIGITAL RF In (Digital) ANALOGUE RF In (Analogue) RF Out Conditional Access Module (CAM) socket Front Terminals 4Video input - phono jack 4 Audio inputs - phono jacks s 4 S video input - 4 pin DIN Headphones jack - minijack stereo Accessories Supplied RM-933 remote control (1) RF Loopthrough Cable (1) IEC designated size AA battery (2) Design and specifications are subject to change without notice. Additional Information 35 Additional Information Troubleshooting Here are some simple soloutions to problems which may affect the picture and sound. Problem Cause No picture, no sound. Poor or no picture (screen is dark), but good sound. No Digital channels after tuning. Some channels are blank. Standby indicator flashing. Good Picture, no sound. Poor picture quality. No colour on colour programmes. Remote control does not function. Distorted picture when changing programmes or selecting Teletext. • Power off. • TV in standby. • Aerial disconnected. • Picture preset level adjustment. • No digital transmissions in your area. • No digital transmissions from the transmitter you are currently using. • Weak signal. • Unsuitable aerial. • Scrambled/subscription-only channel. • Programme used only for data (no picture or sound). • Programme not being transmitted. • Digital mode Timer Record active (regular flash). • Fault (irregular flash). • Volume control. • TV speakers turned off. • Headphones are connected. • Wrong external mode selected on an RGB video source. • Colour level setting. • Batteries low. Media Selector set to wrong mode for the equipment in use. • Inputs from external equipment not switched off. Cause Solution TV in standby. Aerial disconnected. Picture level adjustment. No Digital transmissions in your area. No Digital transmissions from the transmitter you are currently using. Unsuitable aerial. Weak signal. Scrambled/subscription-only channel. Programme information without picture or sound. Fault. Volume control. Wrong external mode selected. Colour level setting. • Plug in the TV. • Press the button on the front of the TV. • If the indicator is on press the button or a numbered button on the remote control. • Check the aerial connection. • Select ‘Picture Adjustment’ on the TV menu system then adjust the brightness, picture and colour balance levels. • Contact a local installer to find out when digital transmissions begin in your area. • Contact a local installer to find out at which transmitter you should be pointing your aerial. • Change your aerial to cover the channels used by digital programmes. (Contact a local installer) • Ensure aerial is correctly aligned to transmitter. • Ensure aerial is plugged directly into the TV (not through other equipment). • Upgrade to a higher gain aerial. • Subscribe to pay-per-view broadcaster. • See ‘Skipping a channel’ section of this manual. • See ‘Manual Programme Preset’ section of this manual. • Do not open the cabinet, refer to qualified personnel. • Contact your nearest Sony Service Centre. • Press the + button on the remote control. • Press the / button repeatedly until the RGB symbol is displayed on screen. • Select ‘Picture Adjustment’ on the TV menu system then adjust the colour setting. / • If you continue to have these problems, have your TV serviced by qualified personnel or you can contact the Sony UK Digital HelpLine on 0870 600 1717. • NEVER open the casing yourself. 36 Additional Information Additional Information Index 4:3 mode 11 14:9 mode 11 A Aerial, connecting 5 Accessories, supplied 4 AFT 29 AI 23 Analogue mode, selecting 9 Audio 17 Audio Adjustment menu 24 Audio-out vol. 24 Auto Format 25 Auto tuning (analogue) 6, 26 Auto tuning (Digital) 19 Auto vol control 24 AV3 Output 25 AV Preset 27 B Balance, adjusting 24 Batteries, inserting into the remote control 4 Brightness, adjusting 23 Buttons, overview of the remote control 7 overview of the TV buttons 8 C CAM Set-up 22 Camcorder, connecting 33 Category pop-up list 10, 15 Channel Index menu 9 Colour, adjusting 23 Colour Tone 23 Configuring, the remote control 34 Connecting, an aerial 5 a Camcorder 33 a DVD 32 a Hi-Fi 32 a PlayStation 32 a Smartlink VCR 32 a VCR 5, 32 audio equipment 32 headphones 33 Contrast, adjusting 23 Country 6, 27 D Decoder 29 Dedicated Digital Teletext channels 12 Digital EPG menu 15 Digital INFO display 17 Digital mode, selecting 9 Digital Teletext 12 Dolby V 24 DRC Mode 23 Dual Sound headphone 24 TV 24 DVD, connecting 32 Dynamic 24 E, F EPG menu 15 Equaliser Adjustment 24 Fastext 13 Favourite programme 10, 18 Format Correction 25 Further...