Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Part No. 1 Top panel 1 TBLH0245 2 Bottom panel 1 TBLH0146 3 Side panel 2 TBLH0219 4 Shelf panel 1 TBLH3093 5 Rear panel 1 TBLH3150 To maintain appearance we recommend the following: Painted Surfaces: Use a damp cloth for cleaning. Do not use any abrasive or chemical treated cleaners. NOTE: As with all indoor furniture, this unit should not be exposed to direct sunlight, extreme temperatures or moisture, as this can result in serious irreparable damage. For improvement purposes, design and specifications are subject to change without notice. When making a part(s) inquiry, please quote part no. & description. For parts inquiries or for out of warranty purchases: PANASONIC SERVICES COMPANY 20421 84th Avenue South, Kent, Washington 98032 - Tel: 1-800-833*9626 ■ Fax: 1-800*237-9080 © 1999 Matsushita Electric Industrial Co., Ltd. • All rights reserved. Unauthorized copying and distribution Is a violation of law. TQ2H164 Printed in Japan Assembly & Placement Panasonic Manual Part no. TY-34WDM60J r Assembly STEP 1 Assembling the Top Panel, Bottom Panel, Left & Right Sides Panels, and Left & Right Partition Panels Use the assembly screws © and attach firmly. Top Panel O Left Side Panel © Dowels Dowels Left Partition Panel 6 (Strengthening Panel) .Right Side Panel © .Right Partition Panel © (Strengthening Panel) Dowels (Upper & Lower) Bottom Panel © STEP 2 Attaching the Casters Insert the casters firmly. Bottom panel STEP 3 Insert the shelf supporting pins ® into the holes on the inward side of the partition panel©©. The shelf can be set at 2 levels. Attaching the Shelf Panel Shelf Panel 0 Face the black side toward the front. Incline the panel and place the dented parts over the shelf supporting pins. Shelf supporting pin ^_ i STEP 4 Attaching the Rear Panel Rear panel fastening screws (2) Rear Panel © Face the black side toward the Insert in the inside. groove. Tighten the rear panel fastening screws ® to strengthen the overall structure. STEP 5 Attaching the glass doors Glass panel bushing ® Upper rotation shaft Glass Door Glass panel shaft seat Glass Door Install the door (in “open” conditions.) 1. Insert the glass panel bushing @ into the holes of the top panel. 2. In order not to scratch the bottom panel, insert the upper shaft of the glass door (in “open” conditions) into thé glass panel bushing ®. 3. While pushing the upper rotation shaft upward, slip the lower rotation shaft into the glass panel bushing. Make sure it is locked in position....