Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
BRIGHTNESS Darker Brighter Adjusts for easier viewing of dark pictures such as night scenes and black hair. COLOR Less More Adjusts slightly to a lighter color. TINT (NTSC only) Reddish Greenish Adjust for nice skin color. SHARPNESSLess More Displays a sharp image. Notes: (1) “COLOR” , “TINT” and “SHARPNESS” settings cannot be adjusted for “RGB” and “PC” input signal modes. (2) You can change the level of each function (CONTRAST, BRIGHTNESS, COLOR, TINT, SHARPNESS) for each PICTURE menu. (3) The setting details for normal, dynamic and cinema respectively are memorized separately for each input mode (VIDEO, COMPONENT, RGB and PC). (4) The “TINT” setting can be adjusted for NTSC signal only. Note: There is little change when PICTURE is increased with a bright picture or reduced with a dark picture. ADVANCED SETTINGS Item Effect Details BLACK EXTENSION Less More Adjusts the dark shades of the image in gradiation. W/B HIGH R Less More Adjusts the white balance for light red areas. W/B HIGH B Less More Adjusts the white balance for light blue areas. W/B LOW R Less More Adjusts the white balance for dark red areas. W/B LOW B Less More Adjusts the white balance for dark blue areas. GAMMA Down Up 2.0 2.2 2.5 Notes: (2) The adjustment values are memorized separately for each input mode (VIDEO, COMPONENT, RGB and PC). (3) The adjustment range values should be used as an adjustment reference. (1) Carry out “W/B” adjustment as follows. A Adjust the white balance of the bright sections using the “W/B HIGH R” and “W/B HIGH B” settings. B Adjust the white balance of the dark sections using the “W/B LOW R” and “W/B LOW B” settings. C Repeat steps A and B to adjust. Steps A and B affect each other’s settings, so repeat each step in turn to make the adjustment. Helpful Hint ( N / NORMALIZE Normalization) While the “ADVANCED SETTINGS” menu is displayed, if either the N button on the remote control is pressed at any time or the (ACTION button) is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. SET UP for Input Signals COMPONENT/RGB IN SELECT Select to match the signals from the source connected to the COMPONENT/RGB input terminals. Y, PB, PR signals “COMPONENT” R, G, B, HD, VD signals “RGB” 1 SET UP Press to display the SET UP menu screen. SURROUND VOL N SOUND INPUT ASPECT PICTURE POS. /SIZE R PICTURE SET UP 2 2 Press to select the “COMPONENT/RGB IN SELECT”. Press to select the desired mode. SELECT SET UP SIGNAL COMPONENT/RGB-IN SELECT RGB OSD LANGUAGE ENGLISH (US) RETURN COMPONENT RGB R Press to exit from adjust mode. 3D Y/C FILTER – For NTSC Video images Select the SIGNAL from the “SET UP” menu during VIDEO input signal mode. (“SIGNAL [VIDEO]” menu is displayed.) Press to select the “3D Y/C FILTER (NTSC)” Press to set ON/OFF. SELECT SET UP SIGNAL COMPONENT/RGB-IN SELECT RGB OSD LANGUAGE ENGLISH (US) RETURN Press (store) button R Press to exit from adjust mode. SIGNAL [ VIDEO ] 3D Y/C FILTER (NTSC) ON COLOR SYSTEM AUTO Panasonic AUTO (4:3) NORMAL CHANGE RETURN SELECT Note: When on, this setting only affects NTSC input signals. SET UP for Input Signals COLOR SYSTEM / Panasonic AUTO Select SIGNAL from the “SET UP” menu during VIDEO (S-VIDEO) input signal mode.(“SIGNAL [VIDEO]” menu is displayed.) Press to select the “COLOR SYSTEM” or “Panasonic AUTO”. Press to select each functions. SELECT SET UP SIGNAL COMPONENT/RGB-IN SELECT RGB OSD LANGUAGE ENGLISH (US) RETURN Press (store) button SIGNAL [ VIDEO ] 3D Y/C FILTER (NTSC) ON COLOR SYSTEM AUTO Panasonic AUTO (4:3) NORMAL CHANGE RETURN SELECT Mode Function Color system Set the color system to match the input signal. If set to “AUTO”, the color system is determined automatically. AUTO PAL SECAM M NTSC NTSC Pansonic AUTO (4:3) Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTO is selected. If you would like to view 4:3 images in “Just” format, set to “JUST”. SET UP for Input Signals SIGNAL [ COMPONENT ] CLAMP POSITION Select SIGNAL from the “SET UP” menu during RGB or PC input signal mode. Press to select each item. Press to adjust. SIGNAL [ RGB ] SYNC H & V PULL-IN RANGE NARROW CLAMP POSITION H-FREQ. 31.5 kHz V-FREQ. 60.0 Hz SYNC ON VIDEO The following operation methods are the same for both the SIGNAL [RGB] and SIGNAL [PC]. SYNC SIGNAL [ PC ] SYNC H & V PULL-IN RANGE NARROW CLAMP POSITION H-FREQ. 31.5 kHz V-FREQ. 60.0 Hz Setting RGB sync signal setting: SYNC H & V Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT). H&V: The H and V sync signals are input from the HD/VD (BNC) connector. SYNC ON G ON G: Uses a synchronized signal on the Video G signal, which is input from the G (BNC) connector. ON VIDEO: Compatible with the scart plug (Europe) The composite video signal input from the VIDEO input terminal is used by dividing the sync signals. Setting PC sync signal setting: Confirm that the input is set to PC INPUT (this setting is valid only for PC INPUT). H&V: The H and V syn...