Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Select the desired level by looking at the picture behind the menu. PICTURE NORMALIZE NORMAL PICTURE MENU STANDARD PICTURE 20 BRIGHTNESS 0 COLOR TINT 0 0 SHARPNESS 0 COLOR TEMP NORMAL PICTURE NORMALIZE PICTURE MENU BRIGHTNESS COLOR STANDARD 0 0 TINT COLOR TEMP NORMAL PICTURE 20 0 0SHARPNESS NORMALSTANDARD DYNAMIC CINEMA Press the left or right button to switch between modes. STANDARD For viewing in standard (evening lighting) environments. This menu selects the normal levels of BRIGHTNESS and PICTURE. DYNAMIC For viewing in brighter environments. This menu selects higher than normal levels of BRIGHTNESS and PICTURE. CINEMA Ideal for movies. Press the left or right button to switch between modes. NORMAL COOL WARM Note: If you would like to change the picture and color of the selected PICTURE menu to something else, adjust using the items in the PICTURE menu. (see next page) Helpful Hint ( N / NORMALIZE Normalization) While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the (ACTION button) is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. PICTURE Adjustments Item Effect Adjustments PICTURE Less More Adjusts the proper picture contrast. BRIGHTNESS Darker Brighter Adjusts for easier viewing of dark pictures such as night scenes and black hair. COLOR Less More Adjusts color saturation. TINT (NTSC only) Reddish Greenish Adjust for natural flesh tones. SHARPNESSLess More Adjusts picture sharpness. Notes: (1) “COLOR” , “TINT” and “SHARPNESS” settings cannot be adjusted for “RGB” and “PC” input signal modes. (2) You can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS) for each PICTURE menu. (3) The setting details for STANDARD, DYNAMIC and CINEMA respectively are memorized separately for each input mode (VIDEO (S VIDEO), COMPONENT RGB and PC). (4) The “TINT” setting can be adjusted for NTSC signal only during “VIDEO (S VIDEO)” input signal. Note: In PICTURE, there is not a noticeable change even when contrast is increased with a bright picture or reduced with a dark picture. SCREENSAVER (For preventing after-images) Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a SCREENSAVER should be used. SET UP Press to display the SETUP menu screen. Press to select the SCREENSAVER. 2 SET UP SIGNAL SCREENSAVER COMPONENT/RGB-IN SELECT RGB OSD LANGUAGE ENGLISH (US) 3 SCREENSAVER FUNCTION MODE WHITE BAR SCROLL ON SIDE BAR ADJUST OFF Press to select the SCREENSAVER screen. Press to select the Function. Press to select the desired function. NEGATIVE WHITE BAR SCROLL WHITE BARSCROLL : A white bar will scroll from left to right. NEGATIVE : A negative image will be displayed on the screen. Press to select the MODE. Press to select ON or OFF. ON / OFF selection NEGATIVE / SCROLL selection 4 SCREENSAVER FUNCTION MODE WHITE BAR SCROLL ON SIDE BAR ADJUST OFF If the MODE is at ON, the menu screen will disappear and the SCREENSAVER will be activated. R To stop the SCREENSAVER under ON, press the button. SCREENSAVER SIDE BAR ADJUST Do not display a picture in 4:3 mode for an extended period, as this can cause an after-image to remain on the side bars on either side of the display field. To prevent the appearance of such an after-image, change the brightness of the side bars. side bars 4:3 Screen Display after-images 1 1 To display the SCREENSAVER screen. (Refer to the previous page, operation guide steps 1 and 2) 2 Press to select the SIDE BAR ADJUST. Press to select OFF, DARK, MID, BRIGHT. OFF DARK MID BRIGHT SCREENSAVER FUNCTION MODE WHITE BAR SCROLL ON SIDE BAR ADJUST MID R Press to exit from SCREENSAVER. Notes: • Setting the side bar to BRIGHT mode for an extended period may result in occurrence of after-images. • The side bars may flash (alternate black/white) depending on the picture being shown on the screen. In such an occurrence, use the Cinema mode. SET UP for Input Signals COMPONENT/RGB IN SELECT Select to match the signals from the source connected to the COMPONENT/RGB input terminals. Y, PB, PR signals “COMPONENT” R, G, B, HD, VD signals “RGB” 1 SET UP SURROUND VOL N SOUND INPUT ASPECT PICTURE POS. /SIZE PICTURE SET UP R Press to display the SET UP menu screen. 2 2 Press to select the “COMPONENT/RGB IN SELECT”. Press to select the desired mode. SET UP SCREENSAVER SIGNAL COMPONENT/RGB-IN SELECT RGB OSD LANGUAGE ENGLISH (US) COMPONENT RGB R Press to exit from adjust mode. 3D Y/C FILTER – For NTSC Video images Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode. (“SIGNAL [VIDEO]” menu is displayed.) Press to select the “3D Y/C FILTER (NTSC)” Press to set ON/OFF. SET UP SIGNAL SCREENSAVER COMPONENT/RGB-IN SELECT RGB OSD LANGUAGE ENGLISH (US) Press (ACTION) button R Press to exit from adjust mode. SIGNAL [ VIDEO ] 3D Y/C FILTER (NTSC) ON COLOR SYSTEM AUTO 3:2 PULLDOWN OFF Panasonic AUTO (4:3) NORMAL Note: When on,...
Dieses Handbuch ist für folgende Modelle:Fernseher - TH-42PHW5 (655.98 kb)