Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Power Indicator Power Indicator: Green Example: The screen below is displayed for a while after the Remote Control Plasma Display is turned on. (setting condition is an Sensor example.) English (UK) Deutsch Francais Italiano Espanol ENGLISH (US) Русский OSD LANGUAGE SETSELECT When the POWER is turned on for the first time, the LANGUAGE selection screen is displayed. From the second time on, language selection can be done from the setup menu. (see page 18) Select the desired language using the or button and press the ACTION ( ) button. Note: Set with the remote control. Buttons on the main unit are unavailable for this setting. From the second time on, the screen shown below is displayed for a while (setting condition is an example). PC FULL Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Plasma Display on. Power Indicator: Green Turn the power to the Plasma Display off by pressing the switch on the unit, when the Plasma Display is on or in standby mode. Note: During operation of the power management function, the power indicator turns orange in the power off state. Basic Controls Basic Controls Remote control sensor INPUT MENU ENTER/+/VOL-/ Main Power On / Off Switch Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby ......... Red • Power-ON ......Green • DPMS ............. Orange (With PC input signal and during operation of PC’s screensaver.) ONSURROUND ON OFF SURROUND button The surround setting switches on and off each time the SURROUND button is pressed. The benefits of surround sound are enormous. You can be completely enveloped in sound; just as if you were at a concert hall or cinema. Note: The surround settings are memorized separately for each AUDIO MENU (STANDARD, DYNAMIC, CLEAR). Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down (see page 16) Enter / Aspect button (see page 16, 19) MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. (see page 16) Normal Viewing PICTURE SET UP SOUND POS. /SIZE INPUT button (INPUT1, INPUT2, INPUT3 and PC selection) (see page 18) N buttonPOS. /SIZE button (see page 20) PICTURE button (see page 23) (see page 20, 23, 24, 25) INPUT button (INPUT1, INPUT2, INPUT3 and PC selection) Press to select INPUT1, INPUT2, INPUT3 and PC input SLOTS sequentially. (see page 18) Sound mute On / Off (see page 25) Numeric buttons (see page 35) ASPECT button Press to adjust the aspect. (see page 19) MULTI Window buttons (see page 21) Basic Controls OFF TIMER 90 1 2 3 PC NORMAL 30 60 0 90 Standby (ON / OFF) button The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 13). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode. SET UP button (see page 16, 17) DIRECT INPUT buttons Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the INPUT mode. This button is used to switch directly to INPUT mode. These buttons can only display the slot which is installed. If you press the button whose slot is not installed, it automatically displays the current input signal. Notes: • For TH-37PH10UK, press to switch the input mode between INPUT1A and INPUT1B. The input mode is not switched to INPUT3 even if pressing . • For TH-42PH10UK, TH-50PH10UK and TH-58PH10UK, press to switch the input mode between INPUT2A and INPUT2B. • Image retention (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent image retention (see page 46), this function is not the perfect solution to image retention. Channel Adjustment This button cannot be used for this model. Volume Adjustment Press the Volume Up “+” or Down “–” button to increase or decrease the sound volume level. OFF TIMER button The Plasma Display can be preset to switch to stand-by after a fixed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed. When three minutes remain, “OFF TIMER 3” will flash. The off timer is cancelled if a power interruption occurs. Remote ID lock (see page 35) Digital Zoom (see page 26) Status button Press the “Status” button to display the current system status. Press to access Digital Zoom. This displays an enlargement of the designated part of the displayed image. ACTION button Press to make selections. SOUND button (see page 25) R button (see page 17) Press the R button to return to previous menu screen.POSITION buttons 1 Input label 2 Aspect mode (see page 19) 3 Off timer The off timer indicator is...
Dieses Handbuch ist für folgende Modelle:Fernseher - TH-37PH10UK (4.71 mb)
Fernseher - TH-42PH10UK (4.71 mb)
Fernseher - TH-58PH10UK (4.71 mb)