Stimmen - 4, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Panasonic Dateigröße: 3.34 mb Dateiname: Unterrichtssprache:

• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. To conserve energy, the TV automatically turns off when no operation of remote or side panel key continues for more than 3 hours. (Enable/Disable) Note• Not in use when setting “Auto power on”, “On/Off Timer” or PC input display. • “No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after turning the power off by “No activity for 3 hours”. • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. Turns TV On automatically when the cable box or a connected device is turned On. (No/Yes) TV AC cord must be plugged into this device. TV comes on every time the power is restored.• The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set. (p. 54) Auto power on No Set to “On”, if you want to light SD card LED while SD card is inserted. (On/Off ) SD card LED On Adjustments/Configurations (alternatives) To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed for more than 10 minutes. (Enable/Disable) Note• Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD mode” or Digital channel. • “No signal for 10 minutes was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after turning the power off by “No signal for 10 minutes”. • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. To conserve energy, the TV automatically turns off when no operation of remote or side panel key continues for more than 3 hours. (Enable/Disable) Note• Not in use when setting “Auto power on”, “On/Off Timer” or PC input display. • “No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after turning the power off by “No activity for 3 hours”. • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. Turns TV On automatically when the cable box or a connected device is turned On. (No/Yes) TV AC cord must be plugged into this device. TV comes on every time the power is restored.• The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set. (p. 54) Auto power on No Set to “On”, if you want to light SD card LED while SD card is inserted. (On/Off ) SD card LED On (Continued) Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital only/Analog only) • Favorite: Only channels registered as FAVORITE (p. 20) Selects the screen menu language (p. 16) Language Channel surf mode All Adjusts the clock (p. 18) Clock Sets channels (p. 50) ANT/Cable setup Selects the terminal and label of the external equipment (p. 53) [Component 1/Component 2/HDMI 1/HDMI 2/HDMI 3/HDMI 4/Video 1/Video 2] To prevent howling, stops output of audio specified in this menu. (p. 53) (On/Off) Prevents “Image retention” with Wobbling. (Automatic/Periodic) • Automatic: Shifts the display image automatically. Pixel orbiter Automatic • Periodic: Shifts the display image every (1/2/3/4) minutes according to what was set in the “Time (minutes)” menu. Sets the time for “Pixel orbiter-Periodic” setting. (1/2/3/4) Time (minutes) 4 Change the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only) 4:3 side bars Bright • The recommended setting is “Bright” to prevent panel “Image retention”. (p. 60) Press “OK” to start “Scrolling” on the screen (p. 60) Scrolling bar Controls equipment connected to HDMI terminals (p. 40) (On/Off) VIERA Link On • “Power off link”, “Power on link”, “Stand-by power save”, “Auto power stand-by” and “Default speakers” cannot be selected if “Off” is set. Sets “Power on link” of HDMI connection equipment (p. 40) (Yes/No) Power on link Yes Sets “Power off link” of HDMI connection equipment (p. 40) (Yes/No) Power off link Yes Stand-by power save No Set “Stand-by power save” of HDMI connection equipment. (p. 40) (No/Yes) Set “Auto power stand-by” of HDMI connection equipment. (p. 40) (No/Yes (with reminder)/Yes (no reminder) Auto power stand-by No Selects the default speakers (p. 40) (TV/Theater) Default speakers TV Sets Network setting (p. 44) Network setting Sets VIERA CAST setting (p. 46) VIERA CAST setting Set Network Camera status. (Search/Registration/Connection/Deleting/Default setting etc.) (p. 30) Network cameras list No signal for 10 minutes Enable No activity for 3 hours Disable Set “Movie”, “Thumbnail” or “Slideshow” to play back SD cards automatically. (Slideshow/Thumbnail/Movie/Set later/Off) Play SD card automatically Set later Displays TV version and software license. About Advanced Performing Reset will clear all items set with Setup, such as channel settings. (p. 50) Reset to defaults 37 Adjustments/...

Herunterladen

Geben Sie zwei Ziffern: