Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
• Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children. WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS: • Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL). • Follow all instructions supplied by the display and wall mount manufacturers. • If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation. • Make sure the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer. • A minimum of two people are required for installation. Flat panel displays can be heavy. Panasonic recommends that a qualified installer performthe wall-mount installation. See page 8. The American Academy of Pediatrics discourages media viewing for children younger than two years. For moredetails, see ¦When setting up the TV • Two people are always required. • For workers’ safety, be sure to follow the assembly procedure on page 9 when attaching the pedestal. Failure to do this may also result in damage of the inside of the LCD panel. ¦When moving the TV • The TV should be kept upright and held by two people when it is moved. • Moving the TV with the LCD panel facing up or down may result in damage of inside of the LCD panel. ¦About built-in wireless LAN/Bluetooth .To use the built-in wireless LAN, an access point needs to be obtained. .Do not use the built-in wireless LAN to connect to any wireless network (SSID*1) for which you do not have usage rights. Such networks may be listed as a result of searches. However, using them may be regarded as illegal access. .Check that the Access point supports WPS*2. (If it does not support WPS, the encryption key of the Access point is required when configuring settings.) .Follow the instructions on the Access point setup screen and configure the appropriate security settings. For more details on setting of Access point, please refer to operating manual for the Access point. .We recommend using 11n (5 GHz) for the wireless system between the built-in wireless LAN and Access point. Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the communication speed may be slower. .If the wireless system of the Access point is changed, devices that could connect by wireless LAN may no longer be able to connect. .Data transmitted and received over radio waves may be intercepted and monitored. .Keep the TV away from the following devices as much as possible: Wireless LAN, microwaves, and other devices that use 2.4 GHz and 5 GHz signals. Otherwise, the TV failures such as malfunction may occur due to the radio wave interference. .When noises occur due to the static electricity, etc., the TV might stop operating for the protection of the devices. In this case, turn the TV Off with power On / Off switch, then turn it On again. *1 SSID is a name for identifying a particular wireless network for transmission. *2 WPS: Wi-Fi Protected Setup Accessories/Optional Accessories Accessories Check you have all the items shown. Accessories Remote Control Transmitter N2QAYB000703 Batteries for the Remote Control Transmitter (2) AA Battery Owner’s Manual Quick Start Guide Child safety Product Registration Card (U.S.A.) Pedestal Optional Accessories Please contact your nearest Panasonic dealer to purchase the recommended optional accessories. For additional details, please refer to the optional accessories installation manual. 3D Eyewear(Rechargeable type).TY-ER3D4S .TY-ER3D4M • Use Panasonic 3D Eyewear supporting Bluetooth wireless technology. • Product information (Model No. and release date etc.) is subject to change without notice. • For more product information(USA) (Canada) reference) Communication Camera .TY-CC20W • This camera can be used with VIERA Connect. • It is recommended to connect the communication camera directly to the TV’s USB2 ports. • For details, read the manual for the Communication Camera. Wall-hanging bracket Please contact a professional installer to purchase the recommended UL qualified wall-hanging bracket. For additional details, please refer to the wall-hanging bracket installation manual. M8 Depth of screw: Minimum: 0.24 ” (6.0 mm) Maximum: 0.31 ” (8.0 mm) Back of the TV Holes for wall-hanging bracket installation Screw for attaching the TV to the wall- hanging bracket (not supplied with the TV) (View from the side) 15.7 ” (400 mm) 15.7 ” (400 mm) WARNING Always be sure to ask a qualified technician to carry out set-up. Do not mount the unit directly below ceiling lights (such as spotlights, floodlights or halogen lights) that typically give off hig...
Dieses Handbuch ist für folgende Modelle:Fernseher - TCL55DT50 (1.53 mb)