Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Panasonic, modell TC26LE70

Hersteller: Panasonic
Dateigröße: 4.94 mb
Dateiname: TC26LE70.PDF

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

•The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i and 1080p. Match the output setting of the digital device. •For details of the applicable HDMI signals, see next page. Input signals that can be displayed Input signals that can be displayed * Mark: Applicable input signal for Component (Y, PB, PR) and HDMI horizontal frequency (kHz) vertical frequency (Hz) COMPONENT HDMI 525 (480) / 60i 15.73 59.94 * * 525 (480) /60p 31.47 59.94 * * 750 (720) /60p 45.00 59.94 * * 1,125 (1,080) /60i 33.75 59.94 * * 1,125 (1,080)/60p 67.43 59.94 * 1,125 (1,080)/60p 67.50 60.00 * Note •Signals other than those shown above may not be displayed properly. •The above signals are reformatted for optimal viewing on your display. Picture mode •Vivid (default): Provides enhanced picture contrast and sharpness for viewing in a well-lit room.•Standard: Recommended for normal viewing conditions with subdued room lighting.•Cinema: For watching movies in a darkened room. It provides a soft, film-like picture.•Custom: Customizes each item according to your taste. Maintenance First, unplug the Power cord plug from the wall outlet. Display panel The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. •If the surface is particularly dirty, soak a soft, lint-free cloth in diluted neutral detergent (1 part detergent diluted by 100 times the amount of water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry. •Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected. Cabinet If the cabinet becomes dirty, wipe it with a soft, dry cloth. •If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then wring the cloth dry. Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth. •Do not allow any detergent to come into direct contact with the surface of the LCD TV. If water droplets get inside the unit, operating problems may result. •Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC. Maintenance Technical Information Pedestal •Cleaning Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small amount of neutral detergent has been added and then wipe with a dry cloth. Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating. (If using a chemically-treated cloth, follow the instructions supplied with the cloth.) •Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with rubber, vinyl products, or the like. (Doing so will cause deterioration.) FAQs, Power cord plug Wipe the plug with a dry cloth at regular intervals. (Moisture and dust can lead to fire or electrical shock.) FAQ Before requesting service or assistance, please follow these simple guides to resolve the problem. If problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. For details (p. 45) SUBSUB MENUMENU - For additional assistance, please contact us via the website at: The remote control does not work •Are the batteries installed correctly? (p. 6)•Has the battery run down? Pictures from external equipment are distortedwhen the unit is connected via HDMI •Is the HDMI cable connected properly? (p. 36-37)•Turn Off the TV unit and equipment, then turn them On again.•Check an input signal from the equipment. (p. 41)•Use equipment compliant with EIA/CEA-861/861B. White spots orshadow images(noise) •Check the position, direction, and connection of the aerial. Interference or frozen digitalchannels (intermittent sound) •Change the direction of antenna for digital channels.•Check “Signal meter” (p. 31). If the signal is weak, check the antenna and consult your local dealer. The LCD panelmoves slightly whenit is pushed with afingerA clattered sound might be heard This is not a malfunction. •There is some looseness around the panel to prevent the damage to the panel. If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV). Problem Actions Scr...