Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Panasonic Dateigröße: 4.73 mb Dateiname: Unterrichtssprache:

(p. 24, 56, 57) 2 POWER indicator Lights up green when power is ON. (p. 24, 56, 57) 3 LAMP indicator Lights up or flashes when the lamp unit is malfunctioning. (p. 24, 56) 1 2 3 1 HDMI Input Terminal 3 Connect from other component. (HDMI 3) 2 SD CARD Slot Insert SD Card. 3 TV/VIDEO* Changes Input source. 4 VOL –+* Press to adjust TV sound. 5 CH ><* Press to change channels. 6 Video Input Connector 3 Connect from other component. (Video 3) 7 Audio Input Connector 3 Connect from other component. (Video 3 / HDMI 3) * Buttons listed above operate the same as Remote Control buttons of the same name. Open Door: Press position 1 , and slide Door open as shown by arrow. Close Door: Press position 2 , and slide Door closed as shown by arrow. Door 1 2 Open Close 1 2 3 4 5 76 Rear View Getting ed VentVent 1 2 3 4 5 6 7 8 9 10 11 15 161312 14 17 VHF/UHF Cable In Input terminal for an antenna or cable box signal. Audio 1 Connect from other component. (HDMI 1) S Video/Video Input Connect from other component. (Video 1) Connect from other component. (Video 2) Audio/ Video 1 Connect from other component. (HDMI 1) Audio/ Video 2 Connect from other component. (HDMI 2) Output video signal. DIGITAL AUDIO Output audio signal (Digital) PC (RGB) Input Connect from PC. (PC) Connect from PC. (PC) 1 2 HDMI Input Terminal 1 3 Connector 1 4 Video Input Connector 2 5 HDMI Input Terminal 1 6 HDMI Input Terminal 2 7 Video Out Connector 8 OUT 9 Connector 10 Audio Input Connector 11 Audio Input Connector 1 Connect from other component. (Video 1) 12 HDMI Input Terminal 2 Audio 2 Connect from other component. (HDMI 2) Audio Input Connector 2 Connect from other component. (Video 2) 13 Audio Out Connector Output audio signal. (Analog) 14 Component Video Input Connector 1 Connect from other component. (Component 1) 15 Audio Input Connector 1 Connect from other component. (Component 1) 16 Component Video Input Connector 2 Connect from other component. (Component 2) 17 Audio Input Connector 2 Connect from other component. (Component 2) Notes • Make sure the vents are not blocked. (This could cause damage.) • Indication on the back panel may change without notice. 12 Installation Connected Equipment Introduction (Signal source) Watching TV VHF/UHF Antenna NTSC (National Television System Committee): Conventional broadcasting ATSC (Advanced Television Systems Committee): Digital TV Standards include digital high-definition television (HDTV), standard-definition television (SDTV), data broadcasting, multi-channel surround-sound audio and interactive television. Cable Box/Cable You need to subscribe to a cable TV service to enjoy viewing their programming. You can enjoy high-definition programming by subscribing to a high-definition cable service. The connection can be done with the use of HDMI or Component Video cable. Recording/playing back with DVD recorder or VCR DVD Recorder This source has higher resolution through interlace or progressive signal. Connection can be done with the use of Component Video or HDMI cable. VCR Connection can be done with the use of an RF cable and Composite Video/S VIDEO. Watching Satellite You can enjoy high-definition programming by subscribing to a high-definition satellite service. Connection can be done with the use of HDMI or Component Video cable. ¦ • • • • ¦ ¦ VHF/UHF Antenna Cable Box/Cable or DVD Recorder VCR or Satellite Antenna Satellite Receiver Enjoying Home theater and DVD recorder with HDMI connection Home theater and DVD Recorder HDMI connection enables you to enjoy higher quality audio and video with a single cable. Enjoying large screen capabilities with PC connection You can enjoy playing computer games or making presentations on a large screen with the PC connection. Notes If your Panasonic DVD Recorder is compatible with EZ Sync (HDAVI control 2), you can operate your Panasonic DVD Recorder with this Projection Display’s remote control (EZ Sync™ on page 34). All cables and external equipment shown in this book are not supplied with this Projection Display. For the details of the external equipment’s connections, please refer to the operating manuals for the equipment. Reference of connection ¦ ¦ • • • Home Theater DVD Recorder PC ¦ Antenna terminal ¦ Pin terminals • Firmly tighten by hand. Match colors of plugs and terminals. Insert firmly. • • ¦ HDMI terminal ¦ S VIDEO terminal • Insert firmly. • Insert firmly. ¦ PC terminal • Insert firmly. red blue green green 13 Getting Start ed Example 1 Connecting Antenna (To watch TV) To connect antenna terminals Cable TV Projection Display VHF/UHF Antenna Note For additional assistance, visit us at : • (If no Cable Box) or ANT OUT ANT IN Cable Box Antenna terminal Back of the unit Power Cord (Connect after all the other connections.) Cable TV VHF/UHF Antenna or If using Cable Box : Set the TV channel to CH3, CH4, or select the appropriate input. When using “Nut type” RF coaxial cable, tighte...

Herunterladen

Geben Sie zwei Ziffern: