Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Panasonic Dateigröße: 1.3 mb Dateiname: Unterrichtssprache:

It was thoroughly tested and tuned at the factory for best performance. Customer Record The model and serial number of this product are located on the back of the PTV. You should note the model and serial number in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event of theft or loss. Product registration is available at Model Number Serial Number Care and Cleaning Projection Screen (Turn PTV Off) The projection screen is a high precision lens system which does not attract dust. □ Occasional dusting with a feather duster or very soft brush using only up and down motions. • Never rub across the screen in side to side motion. □ Infrequent washing with a very weak solution of dishwashing soap, using a soft, lint-free clean cloth. • DO NOT USE ABRASIVE CLEANERS. • Do not use window or glass cleaner, laundry detergent, automatic dishwasher soap, or abrasive cleaners. • Do not use alcohol, ammonia, or petroleum based products. □ Avoid excessive moisture and wipe dry. • Prevent solution from running into the receiver below. □ Avoid bumping or scraping the screen. • Protect the very fine grooves on the screen which transport the picture. Cabinet and Remote Control □ For plastic cabinets and Remote Control, use a soft cloth dampened with water or a mild detergent solution. Avoid excessive moisture and wipe dry. □ For wooden cabinets, use a soft cloth and an occasional coat of furniture polish to preserve the finish. □ Do not use benzene, thinner or other petroleum based products. Specifications Power Source PT-51G53 PT-61G53 PT-51G53X PT-61G53X 120V AC, 60Hz Channel Capability - 181 VHF-12; UHF-56; Cable-113 2 Video Input Jacks 1 Vp-p, 75 Ohm, Phono Jack Type 2 Audio Input Jacks 500mV RMS 47K Ohm To Audio AMP Jack 0-2.0V RMS 4.7K Ohm S-VHS Input Jack S-Video (Y-C) Connector Specifications are subject to change without notice or obligation. 8 Installation Installation Television Location This unit can be used as an entertainment center. Consult your dealer for available options. □ Avoid excessive sunlight or bright lights, including reflections. □ Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure. O Fluorescent lighting may reduce Remote Control transmitting range. □ Avoid magnetic equipment, including motors, fans, or external speakers. Optional Cable Connections Shielded audio and video cables should be used between components. For best results: □ Use 75-ohm coaxial shielded cables. □ Check type of output and input connectors on your components. □ Determine required cable lengths. AC Power Supply Cord CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE Polarized plug NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY BE NECESSARY. Cable/ Antenna For proper reception, either a cable or antenna connection is required. Cable Connection Connect the cable supplied by your local cable company. Note: A cable converter box may be required for proper reception. Check with your local Cable company for compatibility requirements. Antenna Connection Incoming Cable from Cable Company 75 Ohm VHF/UHF on back of PTV For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to TV in the SET UP menu. incoming cabJe trom Home Antenna V 1V Cable Preset Cable Mode is preset at the factory. Antenna users must change to Antenna Mode in the Set Up Menu. 0 Installation_ Optional Equipment Connections VCR’s, video disc players, video game consoles, and DSS equipment can also be connected to the video inputs. See the optional equipment manual for details. TERMINALS ON BACK OF PTV VCR Procedure 1. Connect equipment as shown to rear Audio/Video input jacks. 2. Select the Video mode by pressing TV/VI DEO button. 3. Operate optional equipment as instructed in equipment manual. Note: The S-VIDEO connection is optional and overrides other VIDEO connection. Use INPUT 1, AUDIO R and L with S-VIDEO connection. TO AUDIO AMPIifier Connect to an external audio amplifier input for listening to a stereo system. Note: TO AUDIO AMP terminals cannot be connected directly to external speakers. Audio Adjustments 1. Select TV SPEAKERS ON located in the AUDIO menu on screen. 2. Set amplifier volume to minimum. 3. Adjust PTV volume to desired level. 4. Adjust amplifier volume to match the PTV. 5. Select TV SPEAKERS OFF&VAO from AUDIO menu. 6. Volume, mute, bass, treble and balance are now controlled from the PTV. Note: In OFF&FAO the volume is controlled by the external amplifier. <3 Picture I...

Herunterladen

Geben Sie zwei Ziffern: