Stimmen - 3, Durchschnittliche Bewertung: 5 ( )

Hersteller: Panasonic Dateigröße: 4.27 mb Dateiname: Unterrichtssprache:

• Press CH .. or CH .. button to set the hour (AM or PM). • Press VOL • to enter the next field. Press CH .. or CH .. button to the minutes. Press MENU or OK to return to the Timer screen. • Day Set - Select to set the day of the week. Timer Timer Sleep No Clock Set 10 :00 AM Day Set SUN Procedure • Press CH • to highlight Day Set and select the day of the week using • VOL or VOL .. button. • Press EXIT button to quit the timer menu screen. 24 • MENU OPERATIONS Set Up This menu lets you select antenna, program channels, select analog and digital closed caption, Convergence, Auto Power On, Image Shift and Zoom Adjust. Procedure • Press MENU to display the Main Menu. • Press ..CH, CH.., • VOL or VOL .. to select the Setup icon. • Press OK button to display the options in the Setup menu. Program CH This menu allows you set up the antenna, auto scan all available analog and digital channels, manually add or delete channels and display the signal strength of the digital channels. • Input Setup -Lets you specify Antenna mode (Cableonly, Cable/Antenna or Antenna only). Note: You can connect either a Cable antenna or a terrestrial antenna to Ant A. However, if you have both Cable signal and terrestrial antenna signal, the Cable signal must be connected to the Ant A input on the back of the projection television. Connect the antenna signal to the Ant B input. Procedure • In Set Up menu, select Program Channel and press OK. • Press OK to enter sub-menu. Press • VOL or VOL .. to select Cable Only, Cable/Antenna or Antenna Only. • Press OK button to enter your selection. When the next screen will be displayed, press OK button to start the Auto scan. Auto scan must be done when you select the input signal for the first time or whenever you change the antenna configuration. OK • If Cable Only is selected and DCM is in, Auto scan will be skipped. • If Cable/Antenna is selected and DCM is in, Antenna (B) Analog & Digital Auto scan will be performed. • Auto Scan - To automatically Scan All available channels, Antenna (A) Analog, Antenna (A) Analog & Digital, Antenna (B) Analog and Antenna (B) Analog & Digital. Procedure • Highlight Auto Scan and press OK to enter the sub menu. • Use • CH and CH .. to select and press OK to start the auto scan. After Auto Scan is completed press MENU to return to the previous screen. OK Program Channel Input Setup Manual Program Signal Meter Scan All Antenna (A) Analog Antenna (A) Analog & Digital Antenna (B) Analog Antenna (A) Analog & Digital Press OK to channel scan all available channels Auto Scan • Manual Program - To add or delete channels from either channels list (A/B) manually. Program Channel Input Setup Manual Program Signal Meter Auto Scan RF Input Channel Add Antenna (A) Channel Delete A: 12 .... SELECT .... EXITMENU to return OK • Signal Meter - Displays the signal strength of the ATSCdigital channel in either Antenna (A) or Antenna (B). Note: Signal meter feature is not available for analog channels. Procedure • Highlight Signal Meter and press OK button to enter the sub-menu. • In the RF Input field, select either Antenna (A) or Antenna (B). • Select the channel number using • VOL or VOL • buttons. • Press OK button to display the Signal Strength. ENGLISH Program Channel Input Setup Manual Program Signal Meter Auto Scan Cable only• • Connect Cable to Antenna (A) Change your Input Setup and press OK Program Channel Input Setup Auto Scan Manual Program Signal Meter RF Input Antenna (A) RF Channel 3-1 .... Signal Strength: 70% Peak: : 75% Program Channel Input Setup Manual Program Signal Meter Auto Scan Connect Cable to Antenna (A) ..Cable only .. Auto scan is needed press OK to start Auto Scan Note: The color of the signal bar usually indicates the strength of the received signal. OK • Green - Adequate signal for a good reception. • Yellow - Poor signal strength. • Red - Very poor signal strength. Notes: • If Cable Only, Antenna Only or Antenna/Cable is selected and DCM (Digital Cable Module) is not in, the Auto scan will perform Scan All. 25 • MENU OPERATIONS ENGLISH Closed Caption The HDTV Projection Television includes a built-in decoder that is capable or providing a visual display of the audio portion. The program viewed must provide Closed Captioning (CC) for the television to display it. You can set your preferences to both digital and analog Closed Captioning. CC CCCC Setting OnCC ModeCC Mode AnalogAnalog DigitalDigital CC Mode Select Off, On or On Mute. • Off - Use when Closed Captioning is not desired. • On -To display Closed Captioning. • On Mute -To display Closed Captioning when audio is muted. Analog This option lets you choose the closed caption service you desire. Procedure • In Closed Caption menu, highlight Analog and press OK button to enter the sub-menu. • Press • VOL or VOL • to select the desired setting: CC1, CC2, CC3, CC4, T1, T2, T3 or T4. • CC1 -For video related information that can be displayed (up to 4 line of script on the screen, where it does not...

Herunterladen

Geben Sie zwei Ziffern: