Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Tip: HDMI will provide the best HD picture 2.Change INPUT INPUT Press the INPUT button to select the proper connection. Wait 2 seconds. 3.Power on your Cable , Satellite or Fiber box Use the box's remote control to change channels. *If the box is connected to the TV using a COAX cable (Antenna/Cable in), thenset the TV channel to CH3 or CH4. Note that the picture will not be in HD. *CC/SAP is not available when watching TV with a Cable or Satellite boxconnected via HDMI. *If your box is a high definition, then check that it is outputting 720p or 1080isignal. Tip: press the TV's INFO button to verify. *Check your box "aspect" or "format" settings. It should be set to 16:9, Widescreen or FULL. *If the audio volume is too low, check the box's audio settings. *Contact your Cable or Satellite provider for instructions on any box settings. Watching TV Antenna / Cable service without a box Initial setting 1.Connect coax Connect a COAX wire from either an antenna or Basic Cable service to the TV's"ANTENNA/CABLE IN" screw terminal. TV ANTENNA/ CABLE IN Antenna 2.Scan the channel MENU Setup > ANT/Cable setup > ANT in, Auto program 1. Select Programming source Cable or Antenna in Ant in. 2. Select Auto program and select scan mode (All channels / Analog only / Digital only). 3. Start scanning. *If at the end of the scanning no channels are found, then check: Antenna's position - or Availability of Cable service. Cable, Satellite or Fiber services with a box are typically connected to the TV'sA/V inputs, preferably HDMI, for best HD picture. In such a case, the channelscanning is not needed (set ANT IN to Not used). Watching TV Antenna / Cable service without a box Select channels Select desired channel or CH buttons are also available on the TV. Select desired digital channel To directly enter a digital channel number use When turning to a digital channel, press the button to enter the minor number in acompound channel number. (e.g. CH15-1) Watching TV Antenna / Cable service without a box Favorite channels (Set) Channel numbers registered in Favorite are displayed on the favorite tune screen. Select the desired broadcast station with the cursor or use the number buttons. Favorite channels cannot be set when using Cable or Satellite box Set the Favorite channel OPTION Options menu > Set favorite Select the list number using / and or directly to save thedisplayed channel. Delete a Favorite channel OPTION Options menu > Set favorite Select the list number using / and (press and hold) to delete. * To change the page in Set favorite FAVORITE or / repeatedly Watching TV Antenna / Cable service without a box Favorite channels (Display) Channel numbers registered in Favorite are displayed on the favorite tune screen. Select the desired broadcast station with the cursor or use the number buttons. Favorite channels cannot be set when using Cable or Satellite box. To display a Favorite channel FAVORITE Favorite channels Select the list number using / and or directly to displayedon favorite screen. * To change the page in Favorite channels FAVORITE or / repeatedly Watching TV Antenna / Cable service without a box Closed caption Viewing with Closed caption CCSwitches the Closed caption mode. ( Closed caption Off / Closed caption On / Closed caption On mute ) *CC is not available when watching TV with a Cable or Satellite box connectedvia HDMI. *Contact your Cable or Satellite operator for instructions on enabling CC withtheir box. *The TV's CC button does not operate the Satellite or Cable box's CC function. *For viewing the CC of digital broadcasting, set the aspect to FULL (If viewingwith H-FILL, JUST, ZOOM or 4:3; characters might be cut off). *If the CC is set to On on both the receiver and TV when the signal is 480i(except for the HDMI connection), the CC may overlap on the TV. *If a digital program is being output in analog format, the CC data will also beoutput in analog format. *If the recorder or output monitor is connected to the TV, the CC needs to be setup on the recorder or output monitor. Watching TV Antenna / Cable service without a box SAP Listen with SAP (Secondary Audio Programming) SAP is not available when watching TV with a Cable or Satellite box connectedvia HDMI. Contact your Cable or Satellite operator for instructions on enabling SAP withtheir box. The TV's SAP button does not operate the Satellite or Cable box's SAPfunction. Select the Audio mode for watching TV. SAP Digital mode: Select available audio service when receiving a digital channel. Audio track is automatically selected as DTV language and SAP settings inAudio menu. Menu > Audio > DTV language and SAP settings *If you change the audio settings with the SAP button, the DTV language andSAP settings will not change. Audio track 1 of 7 Track number / Number of tracks English (MainAudio) Current audio track information (language, audio type) English audio Audio service information (example) Analog mode: Select the desired Audio mode. ( Stereo / SA...