Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Panasonic Dateigröße: 1.57 mb Dateiname: Unterrichtssprache:

We recommend that you initially record the codes in the Infrared Remote Codes for Specific Components section, prior to setting up the remote. _ -5- Installation (cont.) Antenna/Cable Connections Antenna Connection - For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to TV. (Refer to Antenna Mode section.) Indoor Outdoor Incoming Cable from Home Antenna Typical VHF/UHF Antenna 75 Ohm VHF/UHF on Back of TV 300 Ohm VHF/UHF on Back of TV or 300 to 75 ohm Matching Transformer(Not Included) Cable Connection - For reception of cable channels, connect the cable supplied by your local cable company. Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.) NOTE: Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable box is required for proper reception. Check with your local Cable company for compatibility requirements. Other Video Equipment VCRs, Video Disc Players, Computers, TV games, and DSS equipment can also be connected to the antenna input connection. Picture Tube (Turn set off) Use a mild soap solution or window cleaner and a clean cloth. DO NOT USE ABRASIVE CLEANERS. Avoid excessive moisture and wipe dry. Plastic Cabinets Wipe the cabinet with a soft cloth dampened with water or a mild detergent solution and wipe dry with a soft clean doth. Avoid excessive moisture. Do not use benzene, thinners or other petroleum based cleaners. Wood Cabinets When dusting or polishing the cabinet, use a clean soft cloth and stroke straight with the grain. An occasional coat of furniture polish will help preserve the finish. Do not use benzene, thinners or other petroleum based cleaners. Do not place objects made of plastic or rubber directly on top of the cabinet. A chemical reaction could result causing permanent marring of the finish. Remote Control Transmitter To clean, wipe with a soft cloth slightly moistened with a mild detergent and then wipe dry with a soft clean cloth. Do not use benzene, thinners or other petroleum based cleaners to clean the Remote Control Transmitter. Incoming Cable from Cable Company Care and Cleaning -6- Optional Equipment Connection and Operation To Audio AMP Connection (Stereo) Connect to an external audio amp auxiliary input for monitoring sound through a stereo system. TERMINALS ON BACK OF TV Adjustment - When an audio amp is connected to ‘TO AUDIO AMP” terminals: 1. Select TV SPEAKERS “ON " Mode. (Refer to the Audio Menu TV Speakers section.) 2. Set volume of audio amp to near minimum. 3. Adjust volume of TV to desired listening level. 4. Adjust volume of audio amp to match the level of TV. 5. Select TV SPEAKERS “OFF&VAO " Mode. (Refer to the Audio Menu TV Speakers section.) 6. Audio bass, treble, balance (some models), volume and mute can now be controlled by the TV Remote Control. NOTE: When Selecting TV SPEAKERS “OFF&FAO” Mode, the TV sound output is always at a constant level and cannot be changed (Refer to the Audio Menu TV Speakers section). Operation 1. Connect optional equipment as shown to INPUT 1 or 2 terminals. If S-Video is to be used, connect S-Video (YC) connector to S-Video terminal and connect audio cables to L & R Audio INPUT 1 terminals. 2. Select the desired Video mode by pressing the TV/VIDEO button. 3. Operate optional equipment (VCR-VDP) as instructed in Optional Equipment manual. “TO AUDIO AMP” terminals cannot be used directly with external speakers. Audio/Video input Connection terminals on back of tv connection when connected. OPTIONAL equipment NOTE: • You must select the same VIDEO Mode that the equipment is connected to. • Connection of optional S-VIDEO jack automatically disconnects the Normal Video Input 1 jack. -7- VCR And Cable Box Connection VCR or VIDEO DtSC PLAYER TERMINALS ON BACK OF TV Incoming Cable From Antenna Or Cable TV System (Cables Not Supplied) Operation 1. Program Remote Control for VCR and Cable Box. 2. Connect incoming Cable to optional cable box ant input. 3. Connect a cable from Cable box ant output to VCR ant input. 4. Connect a cable from VCR ant output to TV ant input. 5. Connect RCA cables from VCR Audio/Video output to TV Audio/Video input, 1 or 2. Select the same VIDEO Mode that the equipment is connected to. Picture in Picture Operation With VCR And Cable Box This Receiver has the “PICTURE IN PICTURE” feature. Forthe proper operation of this feature a second video source is required (such as a VCR). We recommend that you make your antenna and External Video connection as shown below when a second video source is available. VCR Of VIDEO DtSC PLAYER TERMINALS ON BACK OF TV Élfet%â CABLE BOX : S-VÎOEOGUn: '< ö i V ‘tiir ivioeoïOuT^^ ^ f AWT OUTPUT. I hplÄäfl 1,1; ANT INPUT H I >T0AUD10 Incoming Cable From Antenna Or Cable TV System ■■¿ï i .. - - li. V- - : To ANT Terminal (Cables Not ...

Herunterladen

Geben Sie zwei Ziffern: