Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: NEC Dateigröße: 1.26 mb Dateiname: Unterrichtssprache:

The volume, image mode, keystone, brightness, contrast, color, tint and sharpness controls are available for Video or S-Video sources. The volume, image mode, keystone, brightness, contrast, white balance and auto mode controls are available for RGB 1 or RGB 2 sources. The volume, image mode and keystone controls are available for PC CARD. Volume Use the Mouse pad (+) or (–) buttons to adjust the volume. Image Mode. VIDEO/S-VIDEO ........ Use the Mouse pad (+) or (-) buttons to choose "Normal" for a regular picture, "Natural" for true color reproduction, or "Document Camera" for a document camera or other low APL picture. RGB/ PC CARD ..... Use the Mouse pad (+) or (-) buttons to choose "Normal" when in a lighted room and "Natural 1&2" when in a darkened room. 1 for better flesh tone; 2 for true reproduction of middle tones. Keystone Use the Mouse pad (+) or (-) buttons to correct the keystone (trapezoidal) distortion to make the top of the screen longer or shorter to be the same as the bottom. NOTE: The maximum keystone angle that can be corrected is 23 degrees, including the optical offset 8 degrees. NOTE: To save your keystone changes, select "Keystone Save" from the Power Menu. Brightness Use the Mouse pad (+) or (–) buttons to adjust the brightness. Contrast Use the Mouse pad (+) or (–) buttons to adjust the contrast. Color.. Use the Mouse pad (+) or (–) buttons to adjust the color. Tint.. Use the Mouse pad (+) or (–) buttons to adjust the tint. Sharpness.. Use the Mouse pad (+) or (–) buttons to adjust the sharpness. 35E OPERATION 68 69 69 White Balance... Use the Mouse pad (+) or (-) buttons to adjust the white balance. Brightness for each color (RGB) is used to adjust the black level of the screen; Contrast for each color (RGB) to adjust the white level of the screen. Auto Mode... Use the Mouse pad (+) button to turn this feature on so "Horizontal Position", "Vertical Position", "Picture Adjustment", "Fine Picture" and "Resolution" are made automatically. Usually set to ON. When the Auto mode is turned off with the Mouse pad (-) button is turned off, you can adjust/set "Horizontal Position", "Vertical Position", "Picture Adjustment", "Fine Picture" and "Resolution" manually. Horizontal Position...(when Auto Mode is off) Use the Mouse pad (+) button to move the image right; (–) to move it left. This adjustment is made automatically when the Auto mode is turned on. Vertical Position...(when Auto Mode is off) Use the Mouse pad (+) button to move the image up; (–) to move it down. This adjustment is made automatically when the Auto mode is turned on. Picture Adjustment ...(when Auto Mode is off) Use this icon with the “Fine Picture Adjustment” to fine tune the computer image or to remove any vertical banding that might appear. This function adjusts the clock frequencies that eliminate the horizontal banding in the image. Press the Mouse pad (+) and (–) buttons until the banding disappears. This adjustment may be necessary when you connect your computer for the first time. This adjustment is made automatically when the Auto mode is turned on. Fine Picture ...(when Auto Mode is off) Use this icon to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.) Use the Mouse pad (+) and (–) buttons to adjust the image. Use the Fine Adjustment only after the Picture Adjustment is complete. This adjustment is made automatically when the Auto Mode is turned on. Resolution... (when Auto Mode is off) When "Auto mode" is selected, the LCD projector automatically determines the best resolution for the current RGB input signal to project an image using NEC's AccuBlend Intelligent Pixel Blending Technology. Use the Mouse pad (–) button to turn off the Auto mode feature to enable the Resolution feature. Selecting "Real" allows you to project a source in the real resolution (in the under scan mode) if: * the LCD projector fails to determine automatically. * you want to fine adjust an item such as phase. * you want to project signals other than those with an aspect ratio 4 to 3. NOTE: Even when you are in the Real mode, an SXGA image is displayed with AccuBlend Intelligent Pixel Blending Technology. NOTE: , The Document Camera mode will not work with an RGB source. ,, Color, Tint, Sharpness and Image Mode controls will not work with an RGB source or PC Card. The Tint control will not work with a PAL or SECAM source. ,,, Horizontal and Vertical position controls, White Balance, Picture, Fine Picture and Auto Mode adjustments will not work with a Video, S-Video source or PC card. 36E OPERATION 70 71 71 Provides access to Lamp Usage information and the Auto Start and Power Management features. Use the “Select” button on the projector cabinet or (s ) (t ) buttons on your remote control to access a submenu. Then press the Mouse pad (+) or (–) to choose a specific option. Lamp Usage This tells you how long the lamp has been in operation. ...

Herunterladen

Geben Sie zwei Ziffern: