Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Panasonic Dateigröße: 3.27 mb Dateiname: CT30WC14.PDF Unterrichtssprache:

By inputting a High-bandwidth Digital Content Protection (HDCP) high definition picture source to the HDMI terminal of this TV, high definition pictures can be displayed on the screen in their digital form. The HDMI input terminal is not intended to be used with personal computers. This TV is compatible with 1080i, 480p and 480i formats. Select the output of the connecting device to match that of the TV. Notes: 1. HDMI/HDCP = High Definition Multimedia Interface / High-Bandwidth Digital Copy Protection. 2. EIA/CEA-861 Profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection. Compatible formats This TV is compatible with the following formats. Please set the connecting device to the following format. Video signal Format No. of dots Vertical scanning frequency (Hz) 1080i 1920 x 1080i 59.94 / 60 480p 720 x 480p 640 x 480p 59.94 / 60 59.94 / 60 480i 720 x 480i 59.94 / 60 Audio signal When digital audio is included in the HDMI connection, the compatible sampling frequencies are 48 KHz / 44.1KHz / 32 KHz. Connection diagram Follow the diagram below to connect the TV to a set top box or a DVD player. Incoming Cable EXTERNAL DIGITAL COMPONENT AUDIO OUT L R HDMI OUT Note: Use analog audio when no digital audio is available. AUDIO IN L R ANT CABLES NOT INCLUDED TERMINALS ON BACK OF TELEVISION S-VIDEO COMPONENT VIDEO INPUT VIDEO 1 2 INPUT PROG OUT TO AUDIO AMP VIDEO Y PB PR L R AV IN 2 31 HDMI INPUT INPUT * The connector on the TV is HDMI Type A connector. Procedure • Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the TV. • Press TV/VIDEO button on the remote control to select HDMI input. The interface on the TV is an HDMI Type A connector. • If the external device has a DVI output only, use a DVI to HDMI adaptor cable*3 to connect to the HDMI jack on the TV. Also, connect the Audio Out signal from the external device (set top box or DVD player) to the Audio In*4 jacks below the HDMI input. • If you cannot display the picture because your Digital Set Top Box does not have a Digital Out terminal setting, use the Component Video Input (or the S-Video Input or Video Input). In this case, the picture will be displayed as an analog signal. Notes: *3. HDMI-DVI conversion cable (TY-SCH03DH) available on Panasonic Website: (only for USA customers). *4. Please refer to page 19 for Audio setting detail. ENGLISH 9 • SPECIAL FEATURES ENGLISH Special Features ASPECT Button Customer Options depending on Component Input Signal INPUT SIGNAL DISPLAY ON SCREEN ASPECT BUTTON OPTIONS 1080i 16:9 only No options 480p (16:9) Default to 16:9 4:3, Full or Zoom (see below) 480p (4:3) Default to FULL mode. Note: Will stretch picture horizontally. 4:3, Full or Zoom (see below) 480i Default to JUST mode 4:3, Full, Just or Zoom (see below) Input Signal ASPECT Image on 16:9 Screen Size 480i or 480p FULL 16 9 Input Signal ASPECT Image on 16:9 Screen Size 480i JUST 16 9 Input Signal ASPECT 4 3 Image on 16:9 Screen Size 4:3 480i or 480p The ASPECT button on the remote control lets you choose one of four display modes, depending on the formats of the received signal and your preferences. This will display a 4:3 picture at its standard 4:3 size with black side bars. (Not recommended for viewing 4:3 pictures as it may create a permanent image on screen if displayed for a prolonged period of time.) Input Signal ASPECT Image on 16:9 Screen Size 480i or 480p ZOOM 16 9 This will expand the 4:3 picture uniformly (width and height) to full screen width and then reposition the picture vertically. (Recommended for letterbox pictures.) Note: If menu is displayed while in Zoom mode, the aspect will change to Full to display complete menu. This will show picture at full screen size. (Recommended for anamorphic pictures.) This will stretch the right and left edges of a 4:3 picture to fill the screen, The center of the screen will have aspect correction applied. The size of the picture will depend on the original signal. (Recommended for regular TV viewing.) BBE Button Press this button to turn BBE sound feature On or Off. SAP Button Press this button to let you cycle through different audio modes. For example: • If receiving STEREO, SAP and MONO or receiving STEREO and MONO only, pressing SAP button will toggle the audio as follows: STEREO • SAP • MONO Split Operation This feature lets you watch two different channels side by side with or without an external video source. Procedure SPLIT • Press to display Split frame. • Choose channels for the SPLIT frame by pressing SPLIT CTRL button. The right indicator ( ) will appear CH or in Split frame, then use or the remote CH control numeric keypad. Note: Split frame channel can only be changed while right indicator ( )is displayed in split frame. Change Split Frame channel Change Main Picture channel • Select channels for the Main picture by pressing CH or or use the remote contro...

Herunterladen

Geben Sie zwei Ziffern: