Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Panasonic Dateigröße: 1.35 mb Dateiname: Unterrichtssprache:

For best results: □ Use 75-ohm coaxial shielded cables. □ Check type of output and input connectors on your components. □ Determine required cable lengths. AC Power Supply Cord CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE Polarized plug NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY BE NECESSARY. Cable / Antenna 1 and 2 For proper reception, either a cable or antenna connection is required. Cable Connection Connect the cable supplied by your local cable company. Note: A cable converter box may be required for proper reception. Check with your local Cable company for compatibility requirements. Antenna 1 and 2 Connections Incoming Cable from Cable Company 75 Ohm VHF/UHF on back of TV For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna 1 and Antenna 2 must be set to TV in the SET UP incoming cable from mgnu Home Antenna Cable Preset Cable Mode is preset at the factory. Antenna users must change to Antenna 1 and Antenna 2 in the Set Up Menu. 8 Installation Optional Equipment Connections VCR’s, video disc players, video game consoles, and DSS equipment can also be connected to the video inputs. See the optional equipment manual for details. VCR S-^EO'SllT-1 ANnNPVT I ® LpOJi OUTPUT AUDIO OUT I © CABLES NOT SUPPLIED TERMINALS ON BACK OF TV VIDEO S-VIDEO O* INPUT1 1NPUT2 (^| INPUT 3 @ PROG. OUT J_I ( CENTER CHANNEL fNPUT ANT 1 SPUTOUT ANT 2 Procedure 1. Connect equipment as shown to rear Audio/Video input jacks. 2. Select the Video mode by pressing TV/VI DEO button. 3. Operate optional equipment as instructed in equipment manual. Note: The S-VIDEO connection is optional and overrides other VIDEO connection. Use INPUT 1, AUDIO R and L with S-VIDEO connection. TO AUDIO AMP (Amplifier) Connect to an external audio amplifier input for listening through a stereo system. Note: TO AUDIO AMP terminals cannot be connected directly to external speakers. Audio Adjustments 1. Select SPEAKERS ON located in the AUDIO menu on screen. 2. Set amplifier volume to minimum. 3. Adjust TV volume to desired level. 4. Adjust amplifier volume to match the TV. 5. Select SPEAKERS OFF&VAO from AUDIO menu. 6. Volume, mute, bass, treble and balance are now controlled from the TV. PROG. OUT Connection (Program Out Connection) For viewing the TV audio and video with optional video equipment, connect to PROG. OUT terminals on the back of the TV. Procedure 1. Connect optional video equipment to PROG. OUT (R/L Audio and Video) terminals. 2. PROG. OUT terminal display is the same as the on-screen display. 3. See optional equipment manual for further instructions for recording or monitoring. 4) Installation DOLBY CENTER CHANNEL INPUT Your T...

Herunterladen

Geben Sie zwei Ziffern: