Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Philips Dateigröße: 151 kb Dateiname: Unterrichtssprache:

Programme number minus: previous programme number Programme number plus: next programme number P+ P- Record: To record the programme currently selected. Playback: To play a recorded cassette. Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in STOP, the cassette is then I C/AA B ejected from the machine. When tape playback is stopped, press to fast forward the tape at hight speed. When tape playback is stoped, press to rewind the tape at hight speed. 1 0 Sockets on the front: White socket / input socket: To connect a camcorder or video games (audio). Yellow socket / input socket: To connect a camcorder or video games (video). Small socket / AUDIO VIDEO socket for headphones: To connect headphones. Back of the set EXT/AV1 Aerial input socket: To connect the aerial cable EXT1/AV1 Scart socket :To connect a satellite receiver, decoder, video recorder, etc Power switch: To switch the TV-Video Combi off. Caution: If you switch off using the power switch, TIMER-recordings are impossible! The control lights at the front of machine STANDBY Standby light: lights up when the TV-Video Combi has been switched on by means of the main switch. RECORD Recording light: lights up during recording. Fast blink: recording pause; timer recording not stand-by. Slow blink: timer recording is stored in a timer block. 3 EN Specifications Supplied accessories Voltage: 220-240V/50Hz • Operating instructions Power consumption (Standby): less than 5W • Remote control and batteries Rewind time: less than 260 seconds (cassette E-180) Number of video heads : 2 Recording/playback time: 3 hours (SP) (cassette E-180), 6 hours (LP) (cassette E-180) Weight without packing in kg: 11.5 Dimensions in cm (HxWxD):40.0x37.3x38.0 Power consumption : 52W 1. Connecting the TV-Video Combi Preparing the remote control for operation The remote control and its batteries are packed separately in the original TV-Video Combi packaging. You must install the batteries in the remote control before use. 1. 1.1.Take the remote control and the enclosed batteries (2 batteries). 2. 2.2.Open the remote control's battery compartment and place the batteries in it as shown in the picture and close the battery compartment. The remote control is now ready to use. Its range is approximately 7 metres. Connecting the cable 1. 1.1.Insert the aerial cable plug into the AERIAL at the back of the TV-Video Combi. 2. 2.2.Connect the mains cable to the wall socket. 3. 3.3.If the little red standby light (STANDBY ) at the front panel of the set is not lit, please switch on the set using the main power switch. The power switch is located on the left side panel of the set. 4. 4.4.Language setting picture will appear on the screen. WAHLEN KL >DEUTSCH ENGLISH ESPANOL FRANCAIS ITALIANO NEDERLANDS SVENSKA FORTSETZEN=MENU I do not see a Language setting picture * Check the cable connections. You can find more details in chapter 'Preparation for use'. Connecting additional devices You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the EXT1 socket. The respective scart socket is usually marked 'AV' or 'TV' on the decoder or satellite receiver. EN 4 2. Important notes for operation Navigation in the screen menu Switching on You can switch on the TV-Video Combi with STANDBY/ON y yy . If you press PLAY B-K , STOP C-L , PROG P+ , PROG P– , FWD 1-B , REW0-s or while 0..9 the set is in Stand-by, the power will be automatically turned on. Note that the keys 0..9 will be inactive for about 5 seconds just after having switched the TV-Video combi off. Power outage/no power Channel information remains saved for up to 10 year, the time and timer information is saved for up to 1 minute. You can check/change many functions and settings of your TV-Video Combi via on-screen menu. The individual functions are selected, via the remote control as follows: Call up the menu: with MENU . To select: with PLAY B-K STOP C-L . To enter or change your selection: with the number buttons 0..9 or with PLAY B-K STOP C-L . To save or confirm: with FWD 1-B . To cancel: with CLEAR . To end: with STATUS/EXIT . SELECT KL CHOOSE B >TIMER PICTURE CONTROL RECORD SET UP VCR SET UP TUNER SET UP GENERAL SET UP END=EXIT 5 EN 3. Installing your TV-Video Combi Preparation for use This chapter shows you how to prepare your TV- Video Combi for use. The TV-Video Combi automatically seeks out and stores all available TV channels. Connecting additional devices After you have connected additional devices (satellite receiver, etc.) through the aerial cable, switch them on. The automatic channel search will recognise them and save them. 1. 1.1.Select the desired language for the on-screen menu by pressing PLAY B-K STOP C-L . 2. 2.2.Press MENU . 3. 3.3.Confirm with PROG P+ . The automatic TV channel search starts. PLEASE WAIT START FINISH ....................... <14PV 225> 4. 4.4.'TIME' and 'DATE' will appear on the TV screen. TIME --:- DATE --/--/- SMART CLOCK [ON] END=EXIT 5...

Herunterladen

Geben Sie zwei Ziffern: