Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Hitachi Dateigröße: 6.76 mb Dateiname: Unterrichtssprache:

Change TV Guide On Screen® ZIP code and input selection settings. Change the order of icons on the Device Selection menu. Turn the transport menu off and select the channel that your cable box tunes to. V-Chip Lock Menu Figure 6 Block or allow programing based upon rating signals sent by the broadcast station, lock by time, or lock the front panel buttons. Figure 6. Main menu, V-Chip Lock selected Figure 2. Main menu, NetCommand selected Audio/Video Menu Figure 7 Reset the A/V Memory to return to the original factory A/V settings for a selected device. Customize the individual audio and video settings. Display a blue screen when viewing a device with no signal, select Film Mode, or turn the TV speakers On or Off. Record Menu Figure 3 Set up and view recordings and recording defaults. View your customized Record List. If you have more than one digital recording device connected, use this menu to change the default digital Record To device. Set analog recording picture size and quality. Figure 7. Main menu, Audio/Video selected Figure 3. Main menu, Record selected Setup Menu Setup Menu Figure 8 Figure 8. Setup Menu Language Display the on-screen menus in either English or Spanish (Espanol). The first time you powered On your TV, you were requested to select an on-screen menu language. If you choose to change the selection, all menu text will immediately switch to the language of your choice. Program titles and other information sent by a broadcaster will be shown in the original language. Memorize Channels For Antenna 1 (Main) or Antenna 2 (Aux) To start channel memorization, first select an input according to the table below. Input Condition Ant-1 Air When connected to an indoor/outdoor antenna Ant-2 Air Ant-1 Cable When connected to direct cable Ant-2 Cable Press ENTER to start the automatic channel-memorization process. The memorization process is started separately for each antenna selection. During the memorization process, all possible channels on the selected antenna are scanned twice. Analog channels are scanned first and then the process is repeated for digital channels. To stop the automatic channel-memorization process before the process is completed, press CANCEL. Channels memorized before you pressed CANCEL are retained in memory. If you start the memorization process again, all previously memorized channels for the selected antenna input are erased and the process starts over from the beginning. After memorizing channels, the channels in memory can be accessed in ascending or descending order by pressing CH or . Select the Channel Menu to access further channel-editing features such as channel add or delete, channel name, and SQV custom favorite channel memories. When you use a CableCARD™, the complete list of available channels is provided through the CableCARD. As a result, the Ant-1 channel-memorization options are not available and are shown grayed out on the screen. In the TV Guide On Screen® system, the channels displayed and the order in which they are displayed are independent of the channel-memorization process. Refer to the TV Guide On Screen Interactive Program Guide User’s Manual for detailed instructions on editing channels shown in this guide. Clock You may choose to manually or automatically set the clock that your TV will use for recording or timer functions. Manual Figure 9 To manually set the clock, you need to select the current time, including AM or PM, current date, time zone for your area and the Daylight Savings time setting. Figure 9. Time Menu, Manual Clock Setting Time Press ADJUST or repeatedly to slowly select the hour or press and hold to quickly select the hour. Press ENTER to move to the minutes options. Press ADJUST or to select minutes, then press ENTER to select AM or PM. Date Press ADJUST or to select the correct date. Time Zone Select your correct time zone. Press ADJUST or to select the time zone (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii) for your area. Then press ADJUST to move to the Daylight Savings time option. Daylight Savings Time Select the Daylight Savings time (DST) option that your state uses. Press ADJUST or to select Applies if your state or area uses DST, or Ignore if DST does not apply. Auto Select the Time Zone and Daylight Savings time setting, as noted above. You may then tune to a channel (on Ant-1 or Ant-2) that uses Extended Data Service (XDS) time data, typically a PBS channel. The Auto selection will automatically retrieve the correct time and date information from this channel. Be aware that if a channel displays incorrect time information, it is because of information sent from the broadcaster and is not a defect of the TV. Timer On/Off Figure 10 The timer allows you to set up a time when the TV will change the channel and/or turn on the TV. You will need to select the time and day to turn the TV On and the device and channel to display. At your preselected time, the timer will turn the TV On, and this message wi...

Herunterladen

Geben Sie zwei Ziffern: