Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: JVC Dateigröße: 6.35 mb Dateiname: Unterrichtssprache:

Select a connected program source to watch, such as a VCR, DVD player, or antenna. Press INPUT on the remote control to select from icons for the TV inputs. See “Input Selection Menu.” • Picture Formats. Press FORMAT to cycle through picture sizes and shapes to find the one best suited to the program you’re watching. See “TV Signals and Display Formats.” 2. To use the TV to control recordings through NetCommand, see chapter 6, “NetCommand Operations.” To use the TV Guide On Screen system to control recording, see the separate TV Guide On Screen® Interactive Program Guide User’s Manual. 3. To understand use of the Input Selection menu with NetCommand-controlled devices, see chapter 6, “NetCommand Operations.” 4. If you have IEEE 1394 A/V devices, see chapter 6, “NetCommand Operations,” for details on operating such devices. Additional TV Setup 1. Review chapter 5, “TV Menu Settings,” to customize TV operation. Press the MENU key to enter the menu system. Some examples of settings you may wish to change include: • Input Name. Change the device names that appear in the Input Selection menu. See “Input Name Menu.” • Icon Order. Rearrange the device icons in the Input Selection menu to put frequently used icons near the front. See “Icon Order Menu.” • FAV. Create lists of your favorite channels so you can find them quickly. See “Channel Menu.” • Parental Lock. You can restrict TV viewing by program rating or by time of day. You can also disable the front-panel buttons—useful if you have small children. See “Parental Lock Menu.” • Video Settings. Change the video adjustments to get the best picture for your viewing conditions. See “Audio/Video Menu.” You may wish to change the Picture Mode from the default Brilliant to either Bright or Natural, which are suitable for most home viewing environments. 2. To program the remote control to operate A/V devices not under NetCommand control, see Appendix D, “Programming the Remote Control.” TV Care • Lamp Cartridge. When the lamp cartridge needs replacement, replace the lamp yourself and save the cost of a service call. See Appendix C for instructions. • General Cleaning. To keep your TV looking its best, see the cleaning recommendations under “Important Information About Your TV.” Assistance • For troubleshooting, service, and product support, see Appendix E. • For warranty information, see the TV warranty in the back of this book. Chapter 3. TV Setup Installing the Remote Control Care of the Remote Control Batteries 1. Remove the remote control’s back cover by gently pressing in the tab and lifting off the cover. 2. Load the batteries, making sure the polarities (+) and (-) are correct. For best results, insert the negative (-) end first. 3. Snap the cover back in place. 2 1 The remote control requires two AA alkaline batteries. • Use only alkaline batteries. • Be within 20 feet of the equipment. • Do not press two or more buttons at the same time unless instructed to do so. • Do not allow unit to get wet or become heated. • Avoid dropping on hard surfaces. • Do not use harsh chemicals to clean. Use only a soft, lightly moistened cloth. • Do not mix old and new batteries. • Do not heat, take apart, or throw batteries into fire. TV Tips Turning the TV On or Off To turn the TV on or off, point the remote control at the front of the TV and press the POWER button. Alternatively, press the POWER button on the front panel of the TV. If You Turn Off the TV by Mistake 1. Press POWER again within about 30 seconds, while the lamp is still hot, to have the TV come back on immediately. 2. If the LAMP indicator starts blinking (about 30 seconds after you shut off power), wait about one minute for the LAMP indicator to stop blinking and press POWER to turn the TV on again. Controlling Sound Volume Press VOL / to adjust the sound level. Changing Channels To change channels: • Enter the channel number using the number keys on the remote control and press ENTER. For a two-part digital channel, such as 3-1, press 3 — CANCEL 1 to enter a dash (separator). • Press CH / to change channels one channel at a time. • Press and hold CH / to move quickly through channels. • Press QV (QuickView) to switch back to the previ- ously tuned channel. • Use the FAV (Favorites) feature to set up lists of favorite channels and tune to them with the FAV key. See “Channel Menu” in chapter 5. NOTE: Memorize channels to make finding channels easier. Chapter 3. TV Setup When You First Power On the TV Choosing a Language for Menus When you power on the TV for the first time, you can select either English or Spanish for all menus. You can later change the language through the Setup menu. Figure 1. The Welcome screen lets you change the menu language when you first power on the TV. TV Guide On Screen Setup Reminder If you do not set up the TV Guide On Screen system when you first turn on the TV, a reminder screen will appear the next six times you turn on the TV (see figure 2). To set up the TV Guide On Screen sys...

Herunterladen

Geben Sie zwei Ziffern: