Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: JVC Dateigröße: 5.29 mb Dateiname: Unterrichtssprache:

To return all of the settings at once, press GUIDE and FORMAT on the front panel at the same time. To reset the defaults for individual devices, use the A/V Memory Reset selection on the AudioVideo menu. < DEVICEGUIDECANCELMENUENTERMENUFORMAT–CH–<> ADJUST–VOL–<> ><> POWERSYSTEMRESETLAMPSTATUSTIMER Front Panel Inputs and Media Card Slots ............................................................ Media Card Slots and IEEE 1394 Input/Output There are four card slots in the front of the TV that allow the display of JPEG pictures from many digital cameras, MP3 or WMA audio files recorded from computers or other digital recording devices. The card slots are designed for specific types of cards and other cards or objects should not be inserted into the slots as this may damage the TV. CARD- 1 slot is compatible with both MultiMediaCard™ (MMC) and Secure Digital (SD) cards. CARD-2 slot is compatible with SmartMedia™ cards. CARD-3 slot is compatible with CompactFlash® cards and CARD-4 is compatible with MEMORY STICK™ cards. See media card (slideshow, playlist) Setup for details about JPEG, MP3 and WMA file types that are compatible with the TV. The IEEE 1394 input/output allows for temporary connection of IEEE 1394 devices such as some camcorders, to the front of the TV. This connection works the same way as rear IEEE 1394 connections, please refer to the NetCommand® information (Chapter 3) for details. Input 3 This input can be used for convenient connection of a camcorder or other video device to the TV. Please note that if you connect to the S-VIDEO terminal, the VIDEO terminal is deactivated. The VIDEO terminal is active when there is no S-Video connection. INPUT3 IMPORTANT Portions of the advanced circuitry of this TV must continue to operate even when the TV is turned off. Some of these circuits therefore need to be cooled at all times. A low power standby fan may be heard in a quiet environment. This is normal operation. Back Panel IREMITTERNetCommandRDVIAnalogAudioINPUT-1AUDIO2AUDIO/VIDEO1AUDIOL(MONO)RINPUT-2COMPONENT-1YPbPr(480i/480p/720p/1080i) Y/GPb/BPr/RCOMPONENT-2YPbPr(480i/480p/720p/1080i) INPUT-DTVYPbPr/RGBHV(480i/480p/720p/1080i) DTV/ CABLE/ VHF/ UHFANT-2ANT-1DIGITALAUDIOPCVGA/SVGA/XGA/ 720p60HzPC- AUDIOPC- INPUTM-LINKCONTROL/ RS-232CHDMIM-LINKIEEE1394INPUT/OUTPUTLRVIDEOS-VIDEOMONITOROUTPUTLRVHCARDTOPCableCARDSLOTTM 1.2. 3. 4. 5.6.7. 8.9.10. 11. MAINAUX 12. 1. Antenna (ANT-1 MAIN, ANT-2 AUX) ANT-1 MAIN and ANT-2 AUX can each receive both digital and analog over-the-air channels from a VHF/UHF antenna or non-scrambled digital/analog cable channels. Your primary viewing signal source should be connected to ANT-1 MAIN. ANT-1 MAIN must be used to view premium subscription cable TV service authorized by the CableCARD™ access card. The CableCARD access card is provided by your local cable company. ANT-2 AUX can continue to receive over-the-air or non-scrambled cable signals. 2. CableCARD™ Slot The CableCARD access card provided by your cable TV service provider is inserted into this slot. The top of the card should face in the direction the CARD TOP arrow indicates. CableCARD is a nationwide standard system that allows your local cable TV provider to supply you with an access card customized to your account. This card allows the TV to receive, decode and unscramble the premium digital channels included in your cable TV subscription without the use of a cable box. See page 16 for additional CableCARD information and activation instructions. If your cable company is not currently offering CableCARD access cards, you will need to use a cable box provided and authorized by your local cable company to view scrambled channels. 3. Input DTV (480i/480p/720p/1080i) This input is used to connect an external DTV receiver, and can be configured for YPbPr or RGB plus H&V signal types. Please see Appendix B for signal compatibility. 4. Component-1, -2 Inputs YPbPr (480i/480p/720p/1080i) These inputs can be used for the connection of devices with component video outputs, such as a DVD player, external HDTV receiver or compatible video game system. Please see Appendix B for signal compatibility. 5. Input-1, -2; Monitor Output (Audio/Video 1, Audio 2) Input 1 and 2 can be used for the connection of a VCR, Super VHS (S-VHS) VCR, DVD player, standard satellite receiver or other A/V device to the TV. Please note that if S-VIDEO and VIDEO are available for the input, you must choose to connect only one. They cannot both be connected at the same time. The Monitor Output sends the TV audio and video signals from the antennas or Inputs to an A/V receiver or other analog A/V equipment such as a VCR. Digital channels and IEEE 1394 signals will be down converted to analog signals compatible with traditional VCRs. Digital channels or IEEE 1394 signals may be output with copy protection or may display no video signals if they have copy restrictions. There will be only audio and no video signals from Monitor Outputs when viewing the ...

Herunterladen

Geben Sie zwei Ziffern: