Stimmen - 3, Durchschnittliche Bewertung: 5 ( )

Hersteller: JVC Dateigröße: 2.67 mb Dateiname: Unterrichtssprache:

5. When the Welcome screen appears the first time you power on the TV, select a language for TV menus. You can later change the language through the Setup menu. 6. Connect your audio/video (A/V) devices to the TV and perform initial setup. • See chapter 3, “TV Connections,” for connection diagrams. • See the following pages for initial TV setup and use of the Auto Input Sensing feature. • To connect the TV to a personal computer, see “Using the TV with a Personal Computer,” page 16. • 736 and 835 series models: See chapter 6, “NetCommand IR Control,” to perform Net- Command IR “learning” to set up control of your home theater. 7. Mitsubishi recommends you perform a channel scan for channels received on ANT 1 and ANT 2. See “Initial TV Setup” page 13, 8. You can now start watching TV or you can perform additional setup and customization through the TV menus. TV Operation 1. Review chapter 4, “TV Operation and Features,” for TV features including: • Input Selection (viewing source). Select a connected program source to watch, such as a VCR, DVD player, or antenna. Press INPUT on the remote control to select from icons for the TV inputs. See “Choosing a Viewing Source,” page 25. • Program Listings. Press GUIDE to see ChannelView™ listings for programs on ANT 1 and ANT 2. See “ChannelView Channel Listings,” page 28 • Picture Formats. Press FORMAT to cycle through picture sizes and shapes to find the one best suited to the current program. See “TV Signals and Display Formats,” page 31. 2. To view still and moving digital camera images on the TV, see page 32, “Viewing Camera Files.” 3. 736 and 835 series models: To control A/V devices with NetCommand, see page 55, “Operating NetCommand-Controlled Devices.” Additional TV Setup 1. Review chapter 5, “TV Menus,” to customize TV operation. Press the MENU key to enter the menu system. Some examples of settings you may wish to change include: • Fav. Use an on-screen menu to create custom lists of your favorite channels from ANT 1 and ANT 2. See Setup > Edit, page 43. • Order. Rearrange the device icons in the Input Selection menu to put frequently used icons near the front. See Inputs > Order, page 47. • Name. Change the device types that appear in the Input Selection menu. See Inputs > Name options, page 47. • Parental Locks. Restrict TV viewing by program rating, by channel, or by time of day. You can also disable the control-panel buttons if you have small children. - To restrict TV use by program rating, see the Lock > Parent menu, page 49. 2. TV Setup -To lock the control-panel buttons, use the Lock > Control Panel menu, page 50. -To restrict TV use by channel, see Setup > Edit > Lock, page 43. • Video Settings. Change video adjustments to get the best picture for your viewing conditions. See “AV Menu,” page 36. Note: You may wish to change the Picture Mode from the default Brilliant to either Bright or Natural, which are suitable for most home viewing. 2. To program the remote control to operate A/V devices not under NetCommand control, see Appendix C, “Programming the Remote Control.” TV Care • Lamp Cartridge. When the lamp cartridge needs replacement, replace the lamp yourself and save the cost of a service call. See Appendix E for instructions. • General Cleaning. See “Cleaning Recommendations,” page 4. Assistance • For troubleshooting, service, and product support, see Appendix D. • For warranty information, see the TV warranty on page 84. Installing the Remote Control Batteries 1. Remove the remote control’s back cover by gently pressing in the tab and lifting off the cover. 2. Load the batteries, making sure the polarities (+) and (-) are correct. For best results, insert the negative (-) end first. 3. Snap the cover back in place. The remote control requires two AA alkaline batteries. 2 When You First Power On the TV Choosing a Language for Menus 1. Power on the TV for the first time. 2.Press to select either English or Spanish for all menus. You can later change the language selection through the Setup > Language menu described on this page. When you first power on the TV, the Welcome screen lets you change the menu language. Turning the TV On or Off To turn the TV on or off, point the remote control at the front of the TV and press the POWER button. Alternatively, press the POWER button on the control panel of the TV. If You Turn Off the TV by Mistake Press 1. POWER again within about 60 seconds, while the lamp is still hot, to have the TV come back on immediately. If the 2. LAMP indicator starts blinking (about 60 seconds after you shut off power), wait a few moments for the LAMP indicator to stop blinking and press POWER to turn the TV on again. Initial TV Setup Use the Setup menu for basic TV setup options. 1. Press MENU to open the Main menu. 2.Press to highlight the Setup icon and display the Setup menu. Changing the Menu Language Choose to display on-screen menus in either English or Spanish. 1. With the Setup menu displayed, press to highlight the ...

Herunterladen

Geben Sie zwei Ziffern: