Stimmen - 5, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: AOC Dateigröße: 492.79 kb Dateiname: Unterrichtssprache:

Fotos und technische Daten  AOC  L37W781B

Using the 0-9 digit, enter the new programme number(3 digits). Press the OK button to confirm, the programme numbers are swapped. Norm : Allows to change the audio norm. Using the \/ button, select the Norm option. Using the < / > buttons, select the norm. Note : the following norms are available to choose from : I for the UK and Ireland, L/LP for France and Luxembourg, D/K for Eastern Europe, the Middle East and Asia, B/G for Western Europe, Australia and New Zealand. Skip : Allows to skip a channel. Using the \/ button, select the Skip option. Using the < / > buttons, select On, the channel will be skip. Skip : Allows to skip next channel when it is on, and Using the < / > buttons, select store prog: ok. Repeat this procedure to skip other channels. Fine tuning : If the picture is not clear, you can adjust the setting. Using the \/ button, select the Fine tuning option. Using the < / > buttons to find the good tuning point. Manual Search : Allows to launch a manual search. Using the \/ button, select the Manual Search option. Using the < / > buttons, start the search in decreasing or increasing order. The search will stop at the first channel found. If you wish to memorise the channel, select Store Program option using the ^ button and proceed as indicated in previous page. Otherwise, continue the search using < / > buttons. 16 INPUT SELECTION To select TV/VIDEO source: To select desire input source, press the SOURCE button to display the selection menu. Using the ^ / \/ buttons to select each input sources. Press the OK button to display the desire input source. 17 DTV MENU DTV MENU First-Time Installation When the system is first switched on, the Reference Application attempts to configure itself for the first time. This is called ”First Time Installation”. The user is then asked if they wish to perform an automatic tune for services. Automatic tuning functionality is described later in this document. When the automatic tune finishes and services have been found, the lowest number service is selected and a banner describing that service is shown. A user may have chosen not to perform an automatic tune or no services may have been found by an automatic scan. In this instance the user may use the “Main Menu” to automatically scan again or perform a manual scan. The Reference Application also provides the facility for the user to force to trigger a “First Time Installation”. This facility can be found in the “Main Menu” under the “Installation” option. Main Menu Channel list Favourites Guides Settings Common Interface A “Main Menu” is provided to enable the user to configure elements of the Reference Application. In “normal viewing” operation a user can access the “Main Menu” by pressing the “DTVMENU” key. The “Main Menu” is hierarchically organized into categories in order to fit on the screen. Channel List A user may configure the Reference Application to use exclusively TV, Radio or Data services, this feature is know as channel List Model. A user can select a channel List Mode using the configuration dialog; it is permitted to select a channel List Mode that contains no services. When the channel list mode is enabled the program up and down buttons on the remote control will only select those services in the current channel List Mode. And all EPGs will only show those services in the current Channel List Mode. It is still possible to select a service using the services even if it is not a member of the currently selected channel List Mode. Note that if the user has selected a favourites list then the Channel List Mode acts as a filter on top of the selected favourites list. Please press the OK button on your remote control to tune to the highlighted channel. Press DTV MENU to exit this screen. 18 Edit Favourites Lists A favourites list enables the user to select a subset of services they consider favourite. The Reference Application allows the user to have up to five different favourites lists. Favourites lists are defined in the favourites dialog that can be accessed by selecting the favourites button on the channel list dialog and via the Main Menu. Press the OK button on your remote control to add the channel to the highlighted favourites list. An icon indicates which favourites list a channel is in. Guides Now/Next EPG List Schedule EPG Time line schedule EPG Now/Next EPG An EPG dialog is provided that allows the user to view the current and next programme playing on each service. In this dialog a list of channels and the corresponding current and next programmes is displayed. The user can navigate up and down the list of channels and highlight either the now or next programme. Information for the highlighted programmes can be displayed by pressing “Info”. This information includes the start/end time of the programme, the programme genre in brackets, and a synopsis of the programme content. A user may select a service by highlighting a program in the ‘now” list and pressing the “OK” key. Pressing t...

Herunterladen

Geben Sie zwei Ziffern: