Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Sanyo Dateigröße: 4.17 mb Dateiname: Unterrichtssprache:

Do not use a new battery with a used battery. Risk of explosion, if battery is replaced by an incorrect type. Do not expose the Remote Control Unit to moisture, or heat. REMOTE CONTROL KEYS Power Key—Press to turn DTV on or off. Input Key—Press to change the input signal source as follows: Analog RF Digital RF Video1 Video2 Compo2 Compo3 Analog RF. Number Key—Two keys must be pressed to select a direct channel. Example: Press 0 then 6 to select channel 6. For Analog Cable channels above 100, press and hold the 1 key until C1– – appears. Info Key—Press to display the Digital and Analog Full Banner information (press again to remove the display): Digital Full Banner display—Contains a two-part Channel Number (Major and Minor). If available the following is also included–Station ID, Program Title, Date/Time (if set), Antenna Signal Strength, Video Resolution, V-Chip Program Rating, and Audio Reception. Virtual Channel Station ID Time/Date Digital 50-1Digital 50-1WREG-DT9:16pm, Mon Mar 071920*1080(60i) Dining OutWeakStrongEnglishGMajor Minor Program Title Audio Reception V-Chip ProgramResolution Strength Rating Video Signal Analog Full Banner display—Contains Channel Number (analog antenna/cable), Date / Time (if set), Station ID (if available), Program Title (if available), V-Chip Program Rating, and Audio Reception. Analog 12Analog 12PBS9:16pm, Mon Mar 07Dining OutStereoGStation ID Current Time/DateChannel No. Program Title Audio V-Chip Program Reception Rating Point towards DTV . 1456780923POWERINPUTINFORECALLMENUCAPTIONEXITENTERTUNERMUTESLEEP Recall Key—Select the first channel you want to watch; then select another channel using the NUMBER keys. Press RECALL to easily switch between the channels. NOTE: The RECALL key cannot toggle between a Digital channel and an Analog channel. See TUNER (#7)key description. Menu key—Press this key to display the on-screen menu. Tuner Key—Use this key to toggle from one tuning system to another, digital channels, and analog channels. NOTE:The TUNER key is inactive when an external input is selected (Video 1, Video 2, Compo 2, or Compo 3). Cursor (up) (down) keys—Press these keys to move the cursor up and down within the menu. Cursor• (left) • (right) keys—Press these keys to move the cursor left and right within the menu. (Continued on page 12.) Need help?Visit our Web site at or Call 1-800-877-5032 11 REMOTE CONTROL KEYS (Continued) 0INFORECALLMENUCAPTIONEXITVOLRESETAUDIOPIX SHAPECHENTERTUNERMUTESLEEP 11 12 13 14 16 15 18 17 Caption Key—Press to select analog or digital captioning. The Analog Caption modes are: CC1, CC2, Quikcap, and OFF. The Digital Caption modes are: Digital CC1 ~ CC6, Quikcap, and OFF. Channel Scanning ( ((CH ) Keys—Press (up) (down) keys to tune to the next higher or lower channel in the Channel Scan Memory database. The scanning loop includes analog channels, digital channels, and all A/ V inputs. 11 Pix Shape Key—Use this key to change the video display format. Available options depend on signal received and the broadcast’s aspect ratio. They may include: Letter box, Zoom, and Normal for HT27745; Full, Zoom1/2, and Normal for HT28745. Letter BoxZoomNormal Model HT27745 Model HT28745 Zoom—Enlarges Letter Box—Black borders appear at the top and bottom of the screen. Normal—Black borders appear at the sides, of the screen. image (some of the top and bottom may be clipped when using Zoom 1 or Zoom 2 modes). Note: 16:9 image Note: 4:3 image without distortion without distortion on a 4:3 screen. on a 16:9 screen. 13 12 14 15 16 17 18 Audio Key—Press to select the desired audio mode (if available): DIGITAL: Main, Sub1, Sub2, Sub3, etc.; ANALOG: Stereo, Mono, SAP. Sleep Key—Press this key, then press the “0” key to set the Sleep Timer. The desired time can be set from 30 minutes up to 3 hours in 30 minutes increments. Sleep Timer will switch off the DTV automatically. NOTE:The Sleep Timer cancels when the DTV is turned off or if a power failure occurs. Mute Key—Press once to minimize the volume. Press again to restore. NOTE: This key will not mute sound from the audio out jacks. Enter Key—Press this key to select an option from the menu system, when required. Exit Key—Press this key to exit from the menu system. Volume (VOL – +) Keys—Press the – ––+ ++ keys to adjust volume. The screen displays a left or right red arrow that blinks as many time as you press the Vol – –– + ++ keys. Reset Key—Press twice to restore factory settings. The DTV will automatically start Channel Search and clear all customized settings. NOTE: The Reset Function includes a channel search. Current Digital and Analog channel databases will be deleted and new ones created by the Channel Search process. To receive Digital Cable channels, see page 14 for Digital Cable Search. These features will reset to factory defaults: • Picture/Sound Adjustments: Color, Tint, Contrast, Brightness, Sharpness, Color Enhancer, Bass, Treble, and Surround Sound • Channe...

Herunterladen

Geben Sie zwei Ziffern: