Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Daewoo Dateigröße: 2.98 mb Dateiname: Unterrichtssprache:

• When connecting the cables, be sure to match the cable colors. 1 DTV/DVD INPUT L- AUDIO -R PC INPUT UPGRADE PORT DTV/DVD INPUT VIDEO INPUT SPEAKER(8 OHMS) L R L R AUDIO L- AUDIO -R S-VIDEO VIDEO L- AUDIO -R Video Digital Broadcasting Receiver (Set-Top Box) Audio Input Select • Select [Component 1 or Component 2] by INPUT pressing the INPUT SELECT button of the SELECT Remote Control or the PDP unit. • Each time you press the INPUT SELECT button, different input modes appear. The sequence is as follows: Component 1 --> Component 2 --> Video 1 --> Video 2 --> PC. Component1 PC Component2 Video1 Video2 4 4 Select a Desired Channel and Function • Select a desired channel and function by using the Remote Control of Digital Broadcasting Receiver. NOTES: 1) You can select INPUT SELECT while you are using OSD(Menu). Sequence: [Menu] --> [Input] --> [Component 1 or 2 (DTV/DVD)] 2) Digital Broadcasting signals available: 1080i(60Hz), 720p(60Hz), 480p(60Hz) 3) Antenna Connection: Apartment : Check if community antenna receives digital broadcasts. Private Houses: Set the indoor/outdoor UHF antenna to the direction of the digital broadcasting transmitting company. 4) For detailed connection method, refer to the Owner’s Manual of Digital Broadcasting Receiver. 5) What is a component? : Signal with which brightness and color signals are separated, producing a sharp screen. 6) If the Digital Broadcasting Receiver has PC Output terminal (D-sub15pin), connect to ‘PC INPUT’ at the back panel of the PDP. When watching the PDP by PC Input, some undesired signals may be seen at the top and bottom area of the screen. In this case, select [Menu] --> [Screen] --> [Vertical Size] to adjust. 17 Watching Cable Broadcasts • To watch cable broadcasts, subscribe to your local Cable TV Broadcasting, and then, connect the digital set-top box for cable TV to the PDP as shown below. Watching Cable Broadcasts 18 Press the Power Buttons • Turn the PDP and the Receiver ON. 2 Connect a CABLE Broadcasting Receiver to the PDP. • Prepare the A/V connecting cable. • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. 1 VIDEO INPUT S-VIDEO VIDEO L- AUDIO -R PC INPUT UPGRADE PORT DTV/DVD INPUT VIDEO INPUT SPEAKER(8 OHMS) L R L R AUDIO L- AUDIO -R S-VIDEO VIDEO L- AUDIO -R Video/Audio Cable Broadcasting Receiver Input Select • Select [Video 1 or Video 2] by pressing the INPUT SELECT button of the Remote INPUT Control or the PDP unit. SELECT • Each time you press the INPUT SELECT button, different input modes appear. The sequence is as follows: Video 1 --> Video 2 --> PC --> Component 1 --> Component 2. Video1 Video2 PC Component1Component2 4 4 Select a Desired Channel and Function • Select a desired channel and function by using the Remote Control of the Cable Broadcasting Receiver. NOTES: * If your local cable company re-transmits digital broadcasts, you may w...

Herunterladen

Geben Sie zwei Ziffern: