Stimmen - 1, Durchschnittliche Bewertung: 5 ( )

Hersteller: Dynex Dateigröße: 3.27 mb Dateiname: Unterrichtssprache:

Note: Pay close attention to the direction of the stand. The wide portion of the stand must face the front of the TV. 2 Lay the TV on a flat, cushioned surface. 3 Align the stand with the TV, as shown. 4 Move the stand gently until the locators on the stand column align with the locating grooves on the stand. 5 Align the holes in the stand with the holes in the stand column. 6 Secure the stand to the column with the screws provided Installing a wall-mount bracket 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the four screws holding the TV to its stand column, then remove the stand column. 3 Secure the wall-mount bracket (not included) to the back of your TV using the four M6 screws provided with the bracket. Setting up your remote control 1 While pressing the release button on the battery compartment cover on the back of the remote, lift the cover off the remote. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries align with the + and – symbols in the battery compartment. 3 Replace the cover. To program your existing remote control to work with your Dynex TV, see the table below for common codes. If you have problems programming your remote, or need a different remote control code, visit for the latest remote control code information. Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver or game station Using HDMI (best) Using component (better) Using composite(good) Using S-video (fair) Connectin...

Herunterladen

Geben Sie zwei Ziffern: