Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Once you have set the clock by using the following procedure, the TV/VCR will automatically monitor the correct time and date being broadcast by the PBS station in your area, using a new service called Extended Data Service (XDS). Make sure ... • TV/VCR power must be turned on. • Confirm that the antenna connections are correct. • The cable converter box must be turned on if your TV/VCR is connected directly to it. (See NOTES:) • The channel is properly set in advance. - 11-EN 9J27 NOTES: • Auto clock setting only needs to be set once. But it can be done again if the clock’s time has become incorrect for some reason. • If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically. If you do not know what your local PBS station is, then follow “Manual Clock Settings”. The TV/VCR cannot control the channels of the cable converter box or satellite box. –M E N U – 1 Select “SETTING CLOCK” TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP Press the MENU button on the remote control. USER’S SET UP LANGUAGE [ENGLISH] ZERO RETURN Press the PLAY/K or STOP/L but- TIME SEARCH ton to point to “SETTING CLOCK”. Then, press the F.FWD/B button. –SETTING CLOCK – 2 Set “AUTO CLOCK” to [ON] B AUTO CLOCK [ON] Press the F.FWD/B or REW/s AUTO CLOCK CH [AUTO] button repeatedly until [ON] MANUAL CLOCK SET appears. D.S.T. [OFF] 3 Enter the channel number for the PBS station Press the PLAY/K or STOP/L button to point to “AUTO CLOCK CH”. –SETTING CLOCK – AUTO CLOCK [ON] Then press the F.FWD/B or B AUTO CLOCK CH [AUTO] REW/s button until the channel number for your local PBS station MANUAL CLOCK SET D.S.T. [OFF] appears. If you do not know the PBS channel number, leave it set to [AUTO] which is located before [2]. The TV/VCR will search automatically all available channels for the local PBS station, and will select that channel. 4 Exit the Auto Clock Setting Press the MENU button on the remote control to return to TV mode. 5 Turn off the TV/VCR Turn the TV/VCR off. Because the Auto Clock functions automatically while the TV/VCR is off. If you choose [AUTO], • The TV/VCR must search until the PBS channel is found. It must scan each channel for a couple of seconds to determine if that channel is transmitting the XDS signal. • If the time, that is automatically set by this selected PBS station is incorrect, it may not be your local PBS station, but one from a different time zone. Or there is a case that no channel is broadcasting the XDS signal in your area, as shown by no time. In these cases, you must manually enter the correct local PBS station, or set the clock manually and turn off the Auto Clock Setting feature. MANUAL CLOCK SETTING Make sure ... • TV/VCR power must be turned on. In the example below, the clock is to be set to: DATE May 1st, 2002 SETTING TIME 5:40PM 1 Select “SETTING CLOCK” –M E N U – TIMER PROGRAMMING Press the MENU button on the PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER’S SET UP LANGUAGE [ENGLISH] remote control. ZERO RETURN TIME SEARCH Press the PLAY/K or STOP/L but ton to point to “SETTING CLOCK”. Then, press the F.FWD/B button. 2 Select “MANUAL CLOCK SET” –SETTING CLOCK – Press the PLAY/K or STOP/L but- AUTO CLOCK [ON] AUTO CLOCK CH [AUTO] ton to point to “MANUAL CLOCK SET”. B MANUAL CLOCK SET Then, press the F.FWD/B button. D.S.T. [OFF] 3 Select the month –MANUAL CLOCK SET – MONTH DAY YEAR 0 5 / ––––––––– Press the PLAY/K or STOP/L but ton until your desired month appears. (Example: May > 05) HOUR MINUTE ––:–––– Then, press the F.FWD/B button. 4 Select the day –MANUAL CLOCK SET – Press the PLAY/K or STOP/L but- MONTH DAY YEAR 0 5 / 0 1 ––––––– ton until your desired day appears. (Example: 1st > 01) HOUR MINUTE ––:–––– Then, press the F.FWD/B button. - 12-EN 9J27 –MANUAL CLOCK SET – 5 Select the year MONTH DAY YEAR Press the PLAY/K or STOP/L but 0 5 / 0 1 WED 2 0 0 2 ton until your desired year appears. HOUR MINUTE (Example: 2002) ––:–––– Then, press the F.FWD/B button. 6 Select the hour –MANUAL CLOCK SET – Press the PLAY/K or STOP/L but- MONTH DAY YEAR 0 5 / 0 1 WED 2 0 0 2 ton until your desired hour appears. (Example: 5, PM) HOUR MINUTE 0 5:––PM Then, press the F.FWD/B button. –MANUAL CLOCK SET – 7 Select the minute MONTH DAY YEAR 0 5 / 0 1 WED 2 0 0 2 Press the PLAY/K or STOP/L but ton until the desired minute HOUR MINUTE appears. (Example: 40) 0 5:4 0 PM 8 Start the clock 5:40 PM Press the MENU button on the remote control. Although seconds are not displayed, they begin counting from 00 when you press the MENU button on the remote control. Use this feature to synchronize the clock with the correct time. NOTE: When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock. TO CH...