Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
NOTES: • Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled. • When setting the Picture Control, the Game mode will be cancelled. Make sure ... • TV/VCR power must be turned on. 1 Select “PICTURE CONTROL” – M E N U – Press the MENU button on the TIMER PROGRAMMING remote control. B PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER’S SET UP LANGUAGE [ENGLISH] ZERO RETURN Press the PLAY/K or STOP/L but ton to point to ”PICTURE CONTIME SEARCH TROL”. Then, press the F.FWD/B button. 2 Select item you want to adjust Press the PLAY/K or STOP/L button until desired control is displayed. BRIGHT BRIGHT – P PPP PPP PPP PPP PPP PPP PPC CCP PPP PPP PPP PPP PPP PPP PP + CONTRAST COLOR TINT SHARPNESS 3 Adjust the picture control Press the F.FWD/B or REW/s button to adjust to your desired level. REW/s F.FWD/B BRIGHT to decrease brightness to increase brightness CONTRAST to decrease contrast to increase contrast COLOR to pale to brilliant TINT to purple to green SHARPNESS to soft to clear • If there is a power failure of any kind, the unit will retain its memory for this feature. -15-EN 9J27 PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. INSERTING A CASSETTE Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on. Window CORRECT WRONG PRECAUTIONS • Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated. • Avoid extreme heat, high humidity and magnetic fields. • Do not tamper with the cassette mechanism. • Do not touch the tape with your fingers. NORMAL PLAYBACK Make sure ... • TV/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/VCR will start playback automatically. PLAY B 2 To begin playback Press the PLAY button. Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU button to clear the menu. then, press the PLAY button. 3 To stop playback Press the STOP button when playback is completed. STOP AUTO REPEAT PLAYBACK The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button. ALL REPEAT: Repeat playback from the beginning to the end of the tape. BLANK REPEAT: Repeat playback from the beginning to a blank part, which is blank for more than 10 seconds. 1 Select “USER’S SET UP” – M E N U – TIMER PROGRAMMING Press the MENU button on the PICTURE CONTROL SETTING CLOCK CHANNEL SET UP remote control. B USER’S SET UP LANGUAGE [ENGLISH] ZERO RETURN Press the PLAY/K or STOP/L but- TIME SEARCH ton to point to “USER’S SET UP”. Then, press the F.FWD/B button. – USER’S SET UP – 2 Select “ALL” or “BLANK” Press the PLAY/K or STOP/L but- RENTAL B REPEAT PLAY [OFF] [ALL] ton to point to “REPEAT PLAY”. AUTO RETURN Press the F.FWD/B or REW/s button repeatedly until your desired selection [ALL] or [BLANK] appears. 3 Exit the Repeat Play setting Press the MENU button on the remote control to return to the TV mode. 4 Start playback Press the PLAY button to start the Repeat Play. ”REPEAT PLAY B” appears. • Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR. • If the Rental mode is set [ON], the “RENTAL PLAY B” display has priority. TO CANCEL THE REPEAT PLAY MODE Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode. If there is a power failure of any kind, the unit will retain its memory for this feature. - 16-EN 9J27 SEARCH PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button during playback. (in the SP / LP / SLP modes) 2)Press it again and the TV/VCR will now search in super high speed. (in the LP / SLP modes only) NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the picture may revert to Black and White. This is normal. 3)Press the PLAY button to return to normal speed. ZERO RETURN This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Stop a tape at your desired point Rewind or fast forward the tape to the beginning point at which you want to review. 2 Reset the counter to 0:00:00 Press the COUNTER RESET button repeatedly. 3 Begi...