Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. Notes: . When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost. . To cancel the sleep timer, hit [SLEEP] repeatedly until “SLEEP 0” is displayed. . The Sleep Timer Setting display will disappear automatically after 10 seconds of the operation. INSTALLING THE BATTERIES Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. [BATTERY PRECAUTIONS] • Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. • Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones. • If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. • Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. PREPARATION FOR USE [ANTENNA CONNECTION] [CATV/SATELLITE CONNECTION] 1 2 3 CONNECTIONS COMPONENT input AUDIO OUTPUT VIDEO-1 INPUT L R L R L Y Pb R Pr VIDEO S-VIDEO COMPONENT VIDEO INPUT AUDIO INPUT ANT. IN POWER PLAY STOP SKIP OPEN/CLOSE REV FWD VIDEO1 input (Rear) AUDIO OUTPUT VIDEO-1 INPUT L R L R L Y Pb R Pr VIDEO S-VIDEO COMPONENT VIDEO INPUT AUDIO INPUT ANT. IN SELECTING AUDIO/VIDEO INPUT When you use the AUDIO/VIDEO input jacks or COMPONENT VIDEO INPUT jacks, select “VIDEO1” or “VIDEO2” or “COMPONENT” mode by hitting [INPUT SELECT] on the remote control. The input mode changes by hitting the button as following: • To use the VIDEO-1 INPUT jacks on the rear of the TV, select “VIDEO1”. • To use the VIDEO jack on the front of the TV, select “VIDEO2”. • To use the COMPONENT VIDEO INPUT jacks on the rear of the TV, select “COMPONENT”. TV channel VIDEO1 (Rear) VIDEO2 (Front) COMPONENT OPERATIONS VIDEO2 input (Front) VIDEO L-AUDIO-R SLEEP TIMER SETTING Note: . If some digits appear in the corner of the screen when the unit is turned on for the first time, hit [POWER] without unplugging the power cord. Component Video Cable DVD Player Audio Cable Note: . This TV can only accept a 480i (interlaced) video signal. Video Cable Audio Cable S-Video Cable OR Video Cassette Recorder Notes: . The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment. . The S-VIDEO jack is given priority over the VIDEO jack on the rear panel. Video Cable Audio Cable Video Camera Video Game Front of this TV Rear of this TV Rear of this TV Note: . The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment. REMOTE CONTROL AND FRONT PANEL FUNCTION 1 2 3 4 5 6 7 8 9 0 +100 DISPLAY VOL CH CH VOL SLEEP CHANNEL RETURN INPUT SELECT MUTE POWER GAME MENU POWER button To turn TV on/off Channel number buttons CH(ANNEL) K/L buttons MENU button To view on-screen menu GAME button SLEEP button DISPLAY button To display CH No./Audio Status CHANNEL RETURN button To return to previous channel INPUT SELECT button To select TV or external input MUTE button VOL(UME) K/L buttons To select channels To adjust volume VIDEO L-AUDIO-R MENU VOLUME CHANNEL POWER VIDEO L-AUDIO-R MENU VOLUME CHANNEL POWER Infrared Sensor Window POWER button To turn TV on/off CHANNEL K/L buttons To select channels VOLUME X/Y buttons To adjust volume MENU button To view on-screen menu AUDIO L/R input jacks VIDEO input jack UHF VHF VHF/UHF ANT. IN OUT IN VHF/UHF Combiner OR OR 75-ohm Coaxial Cable From Cable System From Cable System or Satellite Antenna CATV Box * or Satellite Box *Some cable TV systems use scrambled signals and require a special converter to receive these channels. Consult your local cable company. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOC ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. [EXTERNAL CONNECTION] AUDIO output AUDIO OUTPUT VIDEO-1 INPUT L R L R L Y Pb R Pr VIDEO S-VIDEO COMPONENT VIDEO INPUT AUDIO INPUT ANT. IN Home Audio System Audio Cable Note: . For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. IN jack before moving the unit. Rear of this TV ex. ex. ex. ex. INPUT SELECT Cables used here are available on t...