Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
If a channel is skipped, you still can use the Number buttons to select it. This is a non-memorized channel; it may have weak reception in your area. Remember, if you are using a Cable Box/Satellite Receiver, set the TV/VCR/DVD to channel 3, 4, or AUX. Change channels at the Cable Box/Satellite Receiver. 5 Press VOL. to adjust the volume. VOLUME 20 – SETUP – LANGUAGE [ENGLISH] ESP FRA AUTO PRESET B • If the power fails, you may need to repeat this first-time setup. • The first-time setup menus only appear the first time you turn on the TV/VCR/DVD.To set up chan- nels or change the menu lan- guage later, see page 18. • To select channels above 99, press the +100/+10 button, then press the Number buttons for the last two digits. For example, to select channel 125, press +100/+10, 2, 5. Precede single- digit channel numbers with a zero (for example, 01...09). • If you do not want to set up the language and channels now, press the SETUP button on the remote to remove the menus. See page 18 later to set the menu language and TV channels. Helpful Hints 19MDTR20(1-49).QX33 03.3.28 11:52 Page 12 12 Playing a Videotape Follow these steps to simply play a videotape. Videotape playback options are on pages 34-40. 1 1 Insert a videotape in the cassette compartment of the TV/VCR/DVD. The power will come on. If the tape’s record tab is missing, play should start automatically. 2 2 If play does not start automatically, press PLAY B to start play. 3 3 Press STOP C to stop play. 4 4 4 Press j / h to rewind the tape. 5 5 When the tape finishes rewinding, press STOP/EJECT on the front of the TV/VCR/DVD to remove the tape. PLAY STOP ENTER RECORD DISC MENU RETURNTITLESETUP AB REPEATSEARCH MODECLEAR MODE ANGLESUBTITLEAUDIO DISPLAY SPEED C.RESET STANDBY-ON PICTURE SELECTSLEEP CH. VOL. MUTE ZOOM 1 2 3 4 5 6 7 8 9 0 +10 +100 REPEAT 2 3 Helpful Hints • If the tape you want to play is already in the TV/VCR/DVD, turn on the power. Press SELECT to choose TV/VCR mode (the red VCR/TV light will be on), then press PLAY B. • When you play an S-VHS format tape, you cannot get the high resolution that would be available on an S-VHS VCR. Noise lines (black and white streaks) may appear in the picture. • If you press SELECT while playing a videotape, play will stop and the unit will switch to DVD mode.This will happen also if you press PLAY B(DVD) or OPEN/CLOSE A(DVD) on the front of the TV/VCR/DVD during videotape playback. 19MDTR20(1-49).QX33 03.3.28 11:52 Page 13 Playing a Disc 13 Before you begin, turn on the power of other equipment connected to the TV/VCR/DVD. Set a stereo (if applicable) to the correct sound source or channel. Details are on page 10. 1 1 Press STANDBY-ON to turn on the TV/VCR/DVD. The unit will be in TV/VCR mode. The red VCR/TV light will be on. 2 2 Press SELECT to put the TV/VCR/DVD in DVD mode. The green DVD light will appear on the front of the TV/VCR/DVD. 3 3 Press OPEN/CLOSE A on the front of the TV/VCR/DVD to open the Disc tray. 4 4 Place a Disc into the tray. Some DVDs are recorded on both sides. Make sure the label of the side you want to play is facing up. Or, if the DVD is recorded on only one side, place the Disc in the tray with the label facing up and the shiny side facing down. PLAY STOP ENTER RECORD DISC MENU RETURNTITLESETUP AB REPEATSEARCH MODECLEAR MODE ANGLESUBTITLEAUDIO DISPLAY SPEED C.RESET STANDBY-ON PICTURE SELECTSLEEP CH. VOL. MUTE ZOOM 1 2 3 4 5 6 7 8 9 0 +10 +100 REPEAT 1 5 6 2 3 Press OPEN/CLOSE A on the front of the TV/VCR/DVD. 4 Insert a Disc. 5 5 Press PLAY B. The tray will close and play will begin. If play does not start, press PLAY B again. Or, you can press OPEN/CLOSE A or press the tray toward the unit to close the tray. If a DVD Disc menu appears instead, see page 51. For MP3 and JPEG details, see page 66. 6 6 Press STOP C to stop play. If play remains stopped for five minutes, the DVD screen will dim. If play is stopped for 20 minutes with no activity at the TV/VCR/DVD, the unit will turn off. Remember, only certain Discs will play. See page six for details. Helpful Hints • If you turn off the unit in DVD mode, when you turn it on again, it will be in TV/VCR mode. • An ‘’X” will appear on the screen when you try to access a feature that is not available.This is not a problem with the TV/VCR/DVD. • If a Disc is dirty or scratched, the picture may be distorted or play may stop. Remove the Disc and try a different one. • Press OPEN/CLOSE A (DVD) or PLAY B (DVD) on the front of the TV/VCR/DVD when the power is off.This turns on the unit in DVD mode (not TV/VCR mode). • If a Disc has multiple layers, the picture may freeze occasionally. This happens when the first layer switches to the second layer.This is not a malfunction. • Pressing SELECT during Disc play stops Disc play and switches the unit to TV/VCR mode. Pressing PLAY B (VCR) on the front of the unit during Disc play stops Disc play and starts tape play. 19MDTR20(1-49).QX33 03.3.28 11:52 Page 14 14 Remote Control Buttons PICTURE B...