Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Magnavox Dateigröße: 765.67 kb Dateiname: de277410-1aa0-0164-59ec-56fa7719d6e0.pdf Unterrichtssprache:

Then, press the STATUS/EXIT button. • The end position (B) must be later on the tape than the start position (A). A-B Repeat Play (cont’d) 39 Press the STATUS/EXIT button to remove the menu. A-B 7-8 REPEAT will appear on the screen. Beneath it, the letter A will flash beside the real-time counter. . A-B REPEAT A 0:12:34 7 6 Play, fast forward, or rewind the tape to the position at which you want to begin playback. Stop the tape, then press the MEMORY button to set the start position (A). The flashing A will become a flashing B. . A-B REPEAT B 0:00:00 8 Play or fast forward the tape to the position at which you VOL. CH. 321 654 987 0 POWER STATUS/EXIT TRACKINGREC/OTR SPEED MEMORY ALT. CH PAUSE/STILL MUTE F.FWDREW PLAY STOP SLEEP/WAKE UP MENU CLEAR want playback to end. Stop the tape, then press the MEMORY button to set the end position (B). . The length of time between the start position (A) and the end position (B) must be at least three minutes. 9 The TV/VCR will immediately rewind the tape to the start position (A) and repeat playback to the end position (B) over and over. (TV programming will appear while the tape is rewinding.) • The counter cannot be memorized or reset when you are using this feature. • A-B Repeat Play will be cancelled if you eject the tape or press the REC(ord)/OTR button. • A-B REPEAT will not appear on the screen at step 6 if a tape is not in the TV/VCR. NO CASSETTE will flash on the screen briefly. • You cannot rewind or fast forward beyond points A or B when you are using this feature. • A-B Repeat Play will be retained if you turn off the TV/VCR power. Helpful Hints 40 Real-Time Counter Memory Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later. 1,5 1 Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape. 2 Press the STATUS/EXIT button. The real-time counter will appear on the screen. 3 01:08 PM STOP 2 CH10 SLP 1 : 23 : 45 4 3 While the counter remains on the screen, press the CLEAR button to reset the real-time counter to zero. 0 : 00 : 00 4 While the counter remains on the screen, press the MEMORY button so that M appears on the screen. To erase a real-time counter memory, press the MEMORY button so that the M disappears from the screen. VOL. CH. 321 654 987 0 POWER STATUS/EXIT TRACKINGREC/OTR SPEED MEMORY ALT. CH PAUSE/STILL MUTE F.FWDREW PLAY STOP SLEEP/WAKE UP MENU CLEAR M 0 : 00 : 00 5 To go to a tape location where the real-time counter was reset to zero, press the REW(ind)/s button or the F.FWD/B button when playback is stopped. When the tape reaches the point at which the counter was set to zero, the tape will stop. Press the PLAY/o button to watch the tape. Helpful Hints • The real-time counter memory will not function during Repeat Play mode. Details are on page 37. • You may only set one real-time counter memory at a time. If you set the real-time counter to zero at a second location, the previous real- time counter to zero setting will be lost. Playback Options 41 Forward and Reverse Searching (SP/LP/SLP) 1 During tape playback, press and release the F.FWD/B button or the REW(ind)/{ button. A fast forward or reverse picture search will begin. 2 To return to normal playback, press the PLAY/s button. Super High Speed Searching (LP/SLP) 1 During tape playback, press the F.FWD/B button or the REW(ind)/{ button, then press again. The TV/VCR will now search in super high speed. 2 To return to normal playback, press the PLAY/s button. Viewing a Still Picture 1 During tape playback, press the PAUSE/STILL button. A still picture will appear on the screen. The noise lines will move each time you press the PAUSE/STILL button. 2 To release the still picture and return to normal playback, press the PLAY/s button. VOL. CH. 321 654 987 0 POWER STATUS/EXIT TRACKINGREC/OTR SPEED MEMORY ALT. CH PAUSE/STILL MUTE F.FWDREW PLAY STOP SLEEP/WAKE UP MENU CLEAR Helpful Hints • Still mode will automatically switch to Stop mode after five minutes to protect the TV/VCR and the tape from damage. • SP/LP/SLP means this feature will work with tapes recorded in Standard Play, Long Play, or Super Long Play. For details about tape speed, see page 29. • LP/SLP means this feature will work with tapes recorded in Long Play and Super Long Play. For details on tape speed, see page 29. • During forward and reverse searching, horizontal noise bars will appear on the TV/VCR screen. • Tapes recorded in SLP speed will have the clearest picture during forward and reverse searching and Still mode. 42 SmartLock SmartLock enables parents to prevent their children from watching inappropriate material on TV. 2,4 SmartLock reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program’s rating meets or exceeds the limitations you select. The ratings are defined on page 4...

Herunterladen

Geben Sie zwei Ziffern: