Stimmen - 4, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Check to make sure that the Teacher’s station/Laptop switch box setting is set to the desired source (Teacher’s Station or Laptop). The VCR should be set to channel L1. • Turn the projector on by pressing the Standby/On (green) button on the remote control. • Select the desired external input source (Computer or VCR). To display the COMPUTER press the RGB button To display the VCR/ ELMO press the VIDEO button Turning OFF the projector • Turn the projector off by pressing the Standby/On (green) button on the remote control. The message POWER OFF appears on the screen. • Press the Standby/On (green) button a second time to turn off the projection unit. Shutting Down the Computer and Locking the Nova • Log off/ shut down the computer. Place all remotes inside of the teacher’s station and lock both doors. IF YOU ARE EXPERIENCING PROBLEMS IN THIS SMART IF YOU ARE EXPERIENCING PROBLEMS IN THIS SMART CLASSROOM PLEASE CALL THE 953- 3375 Instructions Smart Classroom Operations Guide Academic Computing - College of Charleston revised: 1/10/2005:jpva If…. • The Computer will not turn on Then try the following steps… 1) CHECK the POWER SWITCH located INSIDE THE RIGHT CABINET OF THE NOVA STATION. It should light up RED to indicate that the computer is receiving power 2) If the Nova station has power, reset the computer by pressing the reset button on the front of the computer. 3) CHECK THE WALL OUTLET to make sure that the power is plugged in from the Nova Desk. 4) Check to make sure that the power connection in the back of the computer is firmly seated. 5) If you are unable to resolve the problem, CALL THE HELPDESK AT 953-3375. Please use guidelines provided at the end of this Operations Guide to assist you when placing a Help Desk call. If…. • The computer is on but the image is NOT projecting on the screen • The VCR is not projecting on the Screen • The Projector Remote Control Unit does not work • The Projection Unit will not turn on Then try the following steps… 1) Turn the projector bulb on by pressing the Standby/On (green) button on the remote control. 2) When turning on the projector, it takes about 30 SECONDS TO DISPLAY AN IMAGE. If the IMAGE DOES NOT APPEAR after 30 Seconds: 3) Turn off the fluorescent lights in (they can cause interference with the remote) and begin at step 1. Power Switch Instructions Smart Classroom Operations Guide Academic Computing - College of Charleston revised: 1/10/2005:jpva 4) 5) Check that the desired external input source (Computer or VCR) is selected. • To display the computer press the RGB button • To display the VCR/Video Flex Camera press the VIDEO button • Make sure the VCR channel is set to L1 Make sure that the REMOTE IS WITHIN THE OPERATING RANGE of the projection unit (walk directly in front of the projector and begin at step 1). 6) REPLACE the Remote Control BATTERIES (if the remote control has a laser pointer press to see if the batteries are fully charged/pointer works). Sixty Degrees 60° Instructions Smart Classroom Operations Guide Academic Computing - College of Charleston revised: 1/10/2005:jpva If…. • You are unable to connect to the Internet/campus network Then … Try shutting the computer down and restarting it. If this does not resolve the problem, CALL THE HELPDESK AT 953-3375. Use the section at the end of this Operations Guide to assist you when placing a Help Desk call. Question: • How do I get the keypad combination for the Smart Classroom ? Answer: Every faculty member has access to the keypad combinations by logging into the faculty section of Cougar Trail https://cougartrail.cofc.edu/ ). If you are using this room for a conference or seminar or you are a College of Charleston staff member, please contact the Registrar’s Office for assistance. The Office of the Registrar can be reached by phone at 843-953-5668 or 843-953-4831 or by E-mail at registrar@cofc.edu. Please Note: Keypad Codes are confidential and will be changed by the Registrar’s office if given to students. Question: • How do I get a key to the Nova Desk? Answer: Each Academic Department has been given their own set of keys to the Nova Desks. Please contact your department chair to request a key. If you are using this room for a conference or seminar or you are a College of Charleston staff member, please contact the Registrar’s Office for assistance. The Office of the Registrar can be reached by phone at 843-953-5668 or 843-953-4831 or by E- mail at registrar@ cofc.edu. Question: • Is there a “standard smart classroom configuration?” Answer: The Department of Academic Computing maintains a current listing of classroom locations, equipment and contact information at: Most Smart Classrooms on campus are equipped with a: 1) Teacher’s station computer (Mac or PC), 2) laptop hookup, 3) VCR, 4) DVD Player, 5) projection/audio system and 6) ELMO. All Smart Classrooms have the following software: 1) Microsoft Office Suite (Word, Excel, and PowerPoint), 2) In...