Stimmen - 4, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
No user-serviceable parts inside. Refer servicing to qualified service personnel. A The lightning flash with arrow The exclamation point within a head within a triangle is triangle is intended to tell the intended to tell the user that user that important operating parts inside the product are a and servicing instructions are in risk of electric shock to persons. the papers with the appliance. WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture. 2 Congratulations Congratulations Your new TV features a solid state chassis that is designed to give you many years of enjoyment. It was thoroughly tested and tuned at the factory for best performance. Customer Record The model and serial number of this product are located on the back of the TV. You should note the model and serial number in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event of theft or loss. Product registration is available for U.S. customers at: Model Number Serial Number Care and Cleaning Screen (Turn TV Off) • Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE ABRASIVE CLEANERS. • Avoid excessive moisture and wipe dry. Note: Do not spray any type of cleaning fluid directly on the screen. Cabinet and Remote Control • Use a soft cloth dampened with water or a mild detergent solution. Do not use benzene, thinner, or other petroleum based cleaners. • Avoid excessive moisture and wipe dry. Specifications Power Source SP3234/U (2.0A) 120V AC, 60Hz Channel Capability - 181 VHF-12; UHF-56; Cable-125 Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type Audio Input Jacks 500mV RMS 47K Ohm To Audio AMP Jack) 0-2.0V RMS 4.7K Ohm Specifications are subject to change without notice or obligation. Remote Control The Remote Control Quick Reference Guide is located within the package provided with this TV. 3 INSTALLLATION Installation Television Location This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. □ Avoid excessive sunlight or bright lights, including reflections. □ Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure. □ Fluorescent lighting may reduce Remote Control transmitting range. □ Avoid magnetic equipment, including motors, fans, or external speakers. CAUTION: Use this television receiver only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. In order to avoid injury to children, never place your television receiver on a piece of furniture that is capable of being tilted by a child leaning on it, pulling on it, standing on it, or climbing on it. Optional Cable Connection Shielded audio and video cables should be used between components. For best results: □ Use 75-ohm coaxial shielded cables. □ Use appropriate input and output connectors that match your component connectors. □ Avoid long cables to minimize interference. AC Power Supply Cord CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS. Cable / Antenna For proper reception, either a cable or antenna connection is required. Cable Connection • Connect the cable supplied by your incoming Cable from local cable company. Note: A cable converter box may be required for proper reception. Check with your local cable company for compatibility requirements. Cable Company d* 75 Ohm VHF/UHF on back of TV INSTALLLATION Antenna Connection • For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. • Antenna Mode must be set to TV. Note: Cable Mode is preset at the factory. Antenna users must change to TV Mode in the SETUP Menu. Incoming Cable from Home Antenna Optional Equipment Connections VCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video input connection. (See your equipment manual). TERMINALS ON BACK OF TV VCR CABLES NOT SUPPLIED Note: If S-VIDEO and VIDEO input are used at the same time, two images will appear on the TV screen. Procedure 1. Connect equipment as shown to rear Audio/Video input jacks. 2. Select the Video mode by pressing TV/VIDEO button. 3. Operate optional equipment as instructed in equipment manual. TO AUDIO AMPlifier Connect to an external audio amplifier input for listening to a stereo system. Note: TO AUDIO AMP...