Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
DVD player resolutions vary from 480i to 1080i, and this unit can support DVD players up to a maximum resolution of 1080i. CONNECTING A PC Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on this unit using a monitor cable and an audio cable (not included) as shown. Make sure you connect the cable from the computer (PC Connector and AUDIO -PC OUT) to this unit (MONITOR / VGA and AUDIO - PC IN). E - 10 To AUDIO jack (PC OUT) To PC connector English.indd 10 6/11/2008 12:36:38 PM CONNECTIONS CONNECTING AN AUDIO AMPLIFIER This connection allows you to use an audio amplifier and external speakers. Connect the AUDIO cable (not included) as shown. Make sure you connect the cable from the other equipment (AUDIO IN) to this unit (AUDIO OUT). AUDIOAMPLIFIER/ EXTERNALSPEAKERSTo AUDIO OUT jacks To AUDIO IN jacks CONNECTING THE AC POWER CORD • Connect the AC power cord into a wall outlet. • Press the STANDBY / ON button on the left side of the unit or use the remote control to turn on the unit. NOTES • TOPREVENTELECTRICSHOCK,MATCHWIDEBLADEOFPLUGTOWIDESLOTOFWALLOUTLET, THEN FULLY INSERT. • When the AC power cord is plugged in, the unit is not completely disconnected from the main power, even when the power is turned off. • Be sure the AC power cord is disconnected and all functions are off before making connections. • Make sure all components are connected correctly. • When you are not going to use the unit for a long period of time, disconnect theAC power cord. To AC wall outlet USING HEADPHONES • Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level. • When headphones are connected, no sound will come from the front speakers. NOTE Avoid listening to sound at high levels for prolonged periods of time. This may be harmful to you and may cause hearing loss. Headphones (1/8” [3.5mm] diameter plug) E - 11 English.indd 11 6/11/2008 12:36:39 PM INSTALLATION REMOVING THE BASE STAND WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. Do NOT place pressure on the front of the unit at any time because the screen could crack. 1. Disconnect any cables or cords connected to the unit. 2. Lay the unit down on a flat surface, so the backside is facing up, making sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen. 3. Remove the four screws and then remove the BASE STAND from the TV. MOUNTING ON THE WALL This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 3 15/16” x 3 15/16” (100mm x 100mm) mounting kit designed for flat-panel TVs (sold separately). Mount this unit according to the directions included with the mounting kit. 3 15/16” 3 15/16” Four mounting holes E - 12 English.indd 12 6/11/2008 12:36:40 PM PICTUREAUDIOTIMESETUPPARENTALTV PICTUREAUDIOTIMESETUPPARENTALTV TV SETUP Note: Some setting items on the menu screen may not activate depending on what mode the unit is currently in (TV/AV in/YUV in/PC in). PICTURE MENU 1. Press the MENU button. 2. Press the button to enter PICTURE settings. 3. Use the or button to select the options (Picture Mode, Contrast, Brightness, Sharpness, Tint or Color). Adjust them using the or button (Screen will change to your desired setting). 4. Repeat step 3 to adjust other options. 5. To exit the MAIN MENU and return to the normal screen, press the EXIT or MENU button repeatedly. PictureModeContrastBrightnessSharpnessTintColor63Standard4425060UP/DOWNADJUST"MENU":EXIT Picture Mode : Select from preset screen display settings to match the type of show you are watching (Standard, Soft, Movie and Personal). Select Personal mode to recall your custom settings on contrast, brightness, sharpness tint and color. Contrast : Adjust to sharpen the picture quality. The black portions of the picture become richer in darkness and the white become brighter. Brightness : Adjust the brightness of the picture. Brighten or darken the whole picture. Sharpness : Adjust the sharpness level to improve detail in the picture. Tint : Adjust the tint of the picture. (toward purple / toward green) Color : Adjust the color of the picture. AUDIO MENU 1. Press the MENU button. 2. Use the or button to select AUDIO, then press the button to enter the AUDIO settings. 3. Use the or button to select the options (Sound Mode, Bass, Treble, Balance, Audio Language or MTS). Adjust them using the or button. 4. Repeat step 3 to adjust other options. 5. To exit the MAIN MENU and return to the normal screen, press the EXIT or MENU button repeatedly. Note: Experiment with different sound settings until you find the settings you prefer. SoundModeBassTrebleBalanceAudioLanguageMTS50Standard500UP/DOWNADJUST"MENU":EXITEnglishStereo Sound Mode : Select from preset sound settings (Standard, Music, Mo...