Login:
Stimmen - 5, Durchschnittliche Bewertung: 4 ( )

Anleitung Toshiba, modell 13A26C

Hersteller: Toshiba
Dateigröße: 1.86 mb
Dateiname: aea01e27-bb83-439b-9b85-6ef056bc4ef4.pdf
Unterrichtssprache:enfr
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


• Closed Captioned Decoder -Displays closed captions or text on-screen (when available). • Lock feature -This feature has three functions, LOCKING CHANNELS, LOCKING VIDEO INPUT, and SETTING THE GameTimerTM. • Programmable ON Timer -Allows you to program the TV to automatically turn on at a set time. LOCATION OF CONTROLS FRONT BACK 13A26C 13A26C 19A26C 89 19A26C . . . . . . POWER VOLUME CHANNEL VIDEO AUDIO RESETENTER SET MENU 1234 56 7 234 56 1. PHONE (Earphone) Jack -Plug an earphone or monaural headphones with a 1/8” miniplug into this jack for private listening. 2. POWER indicator -Lights up when the power is turned on. 3. Remote Sensor -Signals from the Remote Control unit are received here. 4. POWER Button -Press to turn the TV on or off. 5. VOLUME ^/Ў Buttons -Press to raise or lower the level of the sound. (MENU Buttons) -Press both VOLUME ^/Ў buttons at the same time to display the on-screen menu functions. (SET + / – Buttons) -Press to select the desired setting during on-screen operations. 89 7 6. CHANNEL ^/Ў Buttons -Press to select a higher or lower numbered channel set into memory. (ENTER Button) -Press to enter or select information for on-screen operations. (RESET Button) -Press, while in the on-screen menu mode, to reset the on-screen picture adjustments to their factory preset positions. 7. AUDIO/VIDEO IN Jacks - Audio and video signal cables from an external source can be connected here. 8. AC Power Cord - Plug into an outlet with 120V, 60 Hz AC power only. 9. VHF/UHF IN (ANT) Jack -Connect a VHF/UHF antenna or Cable TV 75 ohm coaxial cable to this jack. 5 3X00221A(E)_P02-07 5 22/12/05, 4:41 PM REMOTE CONTROL 1. POWER Button -Press to turn on the TV. Press again to turn off the TV. 2. Direct Channel Selection/Channel Number Buttons (0–9) -Allow direct tuning of any channel. 3. CH RTN Button -Repeatedly press CH RTN to toggle back and forth between the last two channels you tuned. Before using the remote control, batteries must first be installed. HOW TO INSTALL BATTERIES 1. Open the battery compartment cover. 2. Install two “AAA” (penlight size) batteries. 3. Replace the battery compartment cover. 6 3X00221A(E)_P02-07 6 22/12/05, 4:41 PM 4. SLEEP Button -To set the TV to turn off after a preset amount of time, press the SLEEP button on the remote control. The clock will count down 10 minutes each time the button is pressed in the order of 120, 110, 100, ······ 20, 10, 0. After the sleep time is programmed, the display will disappear then reappear momentarily every ten minutes to remind you the sleep timer function is operating. To confirm the sleep time setting, press the SLEEP button once and the remaining time will be momentarily displayed. To cancel the sleep timer, press the SLEEP button repeatedly until the display turns to 0. 5. VOL (VOLUME) + / – Buttons -Press the + button to increase or the – button to decrease the volume level. 6. MENU Button -Press to display the on-screen menu function. 7. SET + / – Buttons - Press to select the desired setting during on-screen operations. 8. RESET Button - Press to reset the on-screen picture adjustments to their factory preset positions. 9. TV/VIDEO Button -Switches between the TV and external device inputs. 10. RECALL Button -When you press this button, the channel number will appear in the upper right corner of the screen. Press the button again to remove it from the screen. 11. MUTE Button -To turn off the sound, press this button once. The TV will be silenced and the word “MUTE” will appear on the screen. The muting feature can be released by pressing the MUTE button again or one of the VOL + or – buttons. 12. CH (CHANNEL) + / – Buttons -Press the CH + button to change to a higher numbered channel set into memory. Press the CH – button to change to a lower numbered channel set into memory. 13. ENTER Button -Press to enter or select information for on-screen operations. 14. 1/2 Button -Switches between captions channel 1 and captions channel 2 in the closed caption mode. 15. CAP/TEXT Button -Press to switch between normal TV and the two closed caption modes (captions or text), when available. Use two “AAA” size penlight batteries (supplied) for the remote control. The batteries may last approximately one year depending on how much the remote control is used. For best performance, it is recommended that you replace the batteries on a yearly basis or when the remote operation becomes erratic. Caution: • Never throw batteries into a fire. Notes : • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations. • If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones. • When necessary to replace batteries in the remote control, always replace both batteries with new ones. N...

Dieses Handbuch ist für folgende Modelle:
Fernseher - 19A26C (1.86 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien