Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Toshiba Dateigröße: 3.73 mb Dateiname: 59ff6b3f-b930-4d31-8d57-8760456802fe.pdf Unterrichtssprache:

5 CH Bb For channels programmed into the channel memory (page 40): B selects the next higher channel. b selects the next lower channel. 6 GUIDE Displays the channel guide in the CABLE/SAT mode. SET UP Accesses a DVD’s setup menu in the AUX mode. 7 INFO Displays TV status information on-screen. 8 BbC c Press to navigate DVD menus (may not work on some DVD players). 9 ENTER Required by some satellite receivers and DVD players to activate certain functions. 10 DVD CLEAR Press to reset the title and chapter number. 11 PLAY Begins playback of a tape or DVD. 12 PAUSE Press during play or record mode to pause the picture; press again to restart. 13 STOP Stops the tape or DVD. 14 SKIP z Skips forward to locate later DVD chapters. 15 FF Fast-forwards the tape or DVD. (Press during play mode to view the picture moving rapidly forward.) 16 SKIP Z Skips back to beginning of current DVD chapter, or locates previous chapters. 17 REW Rewinds/reverses the tape or DVD. (Press during play mode to view the picture moving rapidly backward.) 18 TV/VCR To view one program while recording another, press to select TV mode. SEARCH selects a specific DVD chapter, title or time. 19 REC Starts tape recording. 20 MODE SELECT switch Set to “TV” to control the TV; “CABLE/SAT” to control a cable converter box or satellite receiver; “AUX 1” to control a VCR; “AUX 2” to control a DVD player or HTIB. 24 HM67 (E/F) Web 213:276 50HM67_EN.book Page 25 Thursday, March 29, 2007 11:28 AM Chapter 3: Using the remote control Remote Control functional key chart Note: • “---” = key does not send a signal in that remote control mode. • “sTV” = key will affect the TV, even though the remote control is in another mode. • * Not available for your TV. REMOTE CONTROL KEY Toshiba TV CABLE SAT (satellite) AUX 1 (VCR) AUX 2 (DVD or HTIB) POWER Power Power Power Power Power SLEEP Sleep timer s TV s TV s TV s TV PIC SIZE Picture size s TV s TV s TV s TV PIC MODE PIC MODE s TV s TV s TV s TV 1-9 Digit 1-9 Digit 1-9 Digit 1-9 Digit 1-9 Digit 1-9 0 Digit 0 Digit 0 Digit 0 Digit 0 Digit 0 100/–/+10 – (sub CH) --– (sub CH) 100 +10 INPUT TV/Video select s TV s TV s TV s TV FAV BROWSER/ TOP MENU FAV BROWSER DVD TOP Menu* ---- -- Top Menu MUTE Sound mute s TV s TV s TV s TV SET UP/GUIDE Guide* --SAT Guide --Setup VOL + – Volume up/down s TV s TV s TV s TV CHBb Channel up/down Channel up/down Channel up/down Channel up/down --RECALL RECALL s TV s TV s TV s TV CH RTN/DVD RTN Previous channel DVD previous menu* ---- -- DVD Return INFO Info --Info --Display ENTER Enter --Select, Enter --Enter Bb Menu up/down --Menu up/down --Menu up/down C 3 Menu left/ Channel Browser™ --Menu left --Menu left c # Menu right/ Channel Browser™ --Menu right --Menu right MENU Menu --Action Menu --DVD Menu EXIT/DVD CLEAR Exit DVD clear* --Exit --DVD Clear PAUSE/STEP Pause* ---- Pause Pause PLAY Play* ---- Play Play STOP Stop* ---- Stop Stop SKIP Z Skip REV* ---- -- Skip REV SKIP z Skip FWD* ---- -- Skip FWD REW Rewind* ---- Rewind Rewind FF Fast FWD* ---- Fast FWD Fast FWD TV/VCR/ SEARCH DVD search* ---- TV/ VCR DVD search REC REC MENU* ---- Record (2 click) --SLOW – SLOW REW* ---- -- -- SLOW + SLOW FWD* ---- -- -- ANGLE Angle* ---- -- DVD Angle SUB TITLE Sub title* ---- -- DVD Sub title AUDIO Audio* ---- -- DVD Audio EJECT Eject* ---- -- DVD Eject 25 HM67 (E/F) Web 213:276 50HM67_EN.book Page 26 Thursday, March 29, 2007 11:28 AM Chapter 3: Using the remote control Programming the remote control to control your other devices Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To program your TV remote control to operate a non-Toshiba device (or a Toshiba device that it is not preprogrammed to operate), follow the steps below. For details on using the remote control to operate the device, see page 24. 1 In the remote control code table (-page 27), find the code for your device. If more than one code is listed, try each one separately until you find one that works. 2 Set the MODE SELECT switch to the type of device you are programming the remote control to operate — CABLE/SAT (for a cable converter box or satellite receiver), AUX 1 (for a VCR or TV/VCR combo), or AUX 2 (for a DVD player or HTIB [home theater in a box]). 3 While holding down E, press the Channel Number buttons to enter the 3-digit code for your device. 4 To test the code, turn on the device, point the remote control at it, and press p. See notes below. • If the correct code was entered, the device will turn off. • If the device does not respond, repeat steps 1–4 using another code. • If the device does not respond to another code, you will need to use the remote control that came with the device. 5 Remember to set the MODE SELECT switch back to “TV” to control the TV. 6 For future reference, write down the code(s) you used: DEVICE CODE DEVICE CODE Note: • In addition to POWER, confirm that all necessary keys on the TV remote control operate your device. If some keys are not operational, repeat the devic...

Herunterladen

Geben Sie zwei Ziffern: