Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Press MENU, then press SET + or – until the indicator next to “LOCK” begins to flash, then press ENTER. Use the Channel Number buttons (0-9) to enter your pass word, then press ENTER. The LOCK menu appears. Press SET + or – until the indicator next to “GAME TIMER” GAMETIMER .+/./ENTER/MENU. OFF306090120 1 2 3 4 begins to flash, then press ENTER. Press SET + or – to select a time limit (30 minutes, 60 minutes, 90 minutes, 120 minutes or OFF). 5 Press MENU repeatedly until the MENU screen is cleared. After the GAME TIMER is programmed, the display will appear briefly every ten minutes to remind you that the GAME TIMER is operating. When the programmed end time is reached, the display will change the channel automatically. This feature allows you to program the TV to turn on automatically at a set time and channel. NOTE: After a power failure or disconnection of the power, the timer setting will be lost. ON TIMER a+ / – / ENTER / MENU n HOUR MINUTE 00h CH 002 00m CANCEL 4 Press SET + or – to set the desired the indicator next to “ON TIMER” begins 1 Press MENU, then press SET + or – until channel, then press ENTER. to flash. Then press ENTER. The ON TIMER menu appears. ON TIMER a+ / – / ENTER / MENU n HOUR MINUTE 08h CH 125 15m SET 2 Press SET + or – to set the desired hour (0-12), then 5 Press SET + or – to select the SET mode, then press ENTER. press ENTER. 6 Press MENU repeatedly until the MENU screen is cleared. 3 Press SET + or – to set the desired minute (00, 05, 10, ...55), then press ENTER. NOTE: To cancel the ON TIMER, select CANCEL in step 4 above. Press MENU repeatedly until the MENU screen is cleared. TROUBLESHOOTING GUIDE Before requesting service, please refer to the following chart for the symptom and possible solution. SYMPTOMS POSSIBLE SOLUTIONS TV does not operate • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off; check fuse or circuit breaker. • Unplug unit for an hour, then plug it back in. Poor sound or no sound • Station or CATV experiencing problems; tune to another station. • Check sound adjustments (VOLUME and MUTE). • Check for sources of possible interference. Poor picture or no picture • Station or CATV experiencing problems; tune to another station. • Make sure channels are set into memory. • Check antenna or CATV connections; adjust antenna. • Check for sources of possible interference. • Check picture control adjustments. • Press CAP/TEXT to turn off the Closed Caption mode. Poor reception on some channels • Station or CATV experiencing problems; tune to another station. • Make sure channels are set into memory. • Station is weak; adjust antenna to receive desired station. • Check for sources of possible interference. Poor color or no color • Station or CATV experiencing problems; tune to another station. • Make sure channels are set into memory. • Check picture control adjustments. • Check antenna or CATV connection. Adjust antenna. Picture wobbles or drifts • Station or CATV experiencing problems; tune to another station. • Make sure channels are set into memory. • CATV company is scrambling signal. • Adjust antenna. SYMPTOMS POSSIBLE SOLUTIONS No CATV reception • Check all CATV connections. • Set TV/CABLE menu option to the CABLE mode. • Station or CATV system problems; try another station. Horizontal or diagonal bars on screen • Check antenna connections; reorient antenna. • Check for sources of possible interference. No reception above channel 13 • Make sure TV/CABLE menu option is in the appropriate mode. • If using antenna, check UHF antenna connections. No Remote operation • Batteries are weak, dead or inserted incorrectly. • Remote is out of range; move closer to TV (within 15 feet). • Make sure Remote is aimed at sensor. • Confirm there are no obstructions between the Remote and the TV. • Make sure the power cord is plugged in. TV shuts off • No broadcast on station tuned. • Sleep Timer is set. • Power interrupted. Closed Caption is not activated • TV station experiencing problems or program tuned is not closed captioned. Try another channel. • Check CATV connection or VHF/UHF antenna, reposition or rotate antenna. • Press CAP/TEXT to turn on the closed caption decoder. Black box on screen • Press CAP/TEXT to turn off the Closed Caption mode. Display is not shown in your language • Select proper language in the menu options. SPECIFICATIONS AC Power Input: AC Power Consumption: Picture Tube: Audio Power Output Rating: Speaker: Tuner Type: Remote Control: Receiving Channels: Antenna Input Impedance: Input: Dimensions: Weight: ACCESSORY 120V, 60Hz 90 Watts Type 20 (508mm diagonal) 2.5 + 2.5 Watts 2 inches (51mm) x 4-11/16 inches (119 mm) Full Range, 8 ohm x 2 181 Channel, Quartz PLL Frequency Synthesized Infrared, Direct Access, 2 x AAA batteries (supplied) VHF 2-13 UHF 14-69 CATV 01-97 (5A)-(A-3) 98-99 (A-2)-(A-1) 14-22 (A)-(I) 23-36 (J)-(W) 37-65 (AA)-(FFF) 66-125 (GGG)-(125) 75 Ohm (VHF/UHF) Coaxial Input Video: 1.0 Vp-p 75 ohm Audio: 300 ...
Dieses Handbuch ist für folgende Modelle:Fernseher - 20A43 (3.09 mb)