Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Clear Turn TV ON: Day Time(HH:MM) TV ON Duration: CancelSave On/off Timer Every Day 2 Hours 02 : 20 PM 4. Press z to highlight the TIME field, and then use the Number buttons to enter the time you want the TV to turn on. 5. When the AM/PM field is highlighted, press • to select AM or PM. 6. Press z to highlight the TV ON DURATION field, and then press • to select the length of time until the TV turns off. 7. Highlight SAVE and press ENTER. 8. Turn off the TV. The TV will turn on automatically on the day(s) and at the time you set. The TV will then turn off automatically after the length of time you set in the TV ON DURATION field. Note: •When a power failure occurs, the ON/OFF timer settings may be cleared. •To display the on time setting, press RECALL. To turn off the ON/OFF timer: Select NOT SET in step 3 above. Setting the sleep timer You can set the sleep timer to turn off the TV after a set length of time (maximum of 3 hours). The sleep timer turns off the TV one time only, as opposed to the ON/OFF timer, which turns off the TV on a recurring basis. To set the sleep timer: Press SLEEP on the remote control to set the length of time until the TV turns off. Each time you press SLEEP, the time will increase in 10-minute increments, to a maximum of 180 minutes. To cancel the sleep timer: Press SLEEP until it is set to 0. ACTION ENTER MENU – 100 +10 SLEEP To set the sleep timer using the on-screen menus: 1. Press MENU and open the SETUP menu. 2. Press z to highlight SLEEP TIMER and press ENTER. 3. Press the Number buttons to enter the length of time until the TV turns off automatically. Sleep Timer Cancel Enter total minutes until the TV turns off automatically(Maximum 180 minutes) Save 1 8 0 4. Highlight SAVE and press ENTER. Note: •When a power failure occurs, the sleep timer setting may be cleared. •To display the amount of time left on the sleep timer, press RECALL. 86 86 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. HM94(E)082-87(8c-UseTV) 86 8/31/04, 3:25 PM (E) 46/52/62HM94 Chapter 8: Using the TV’s features Displaying TV setting information on-screen Press RECALL to display the following information on-screen: •Current input (ANT 1, ANT 2, VIDEO 1, etc.) •If ANT 1 or ANT 2 is the current input, whether it is Cable TV (“CABLE”) or off-air (“TV”) • Channel number (if in ANT 1 or ANT 2 mode) •Time (if set) •Timer settings (if set) •Remaining time on sleep timer (if set) •Remaining time on game timer (if set) •Stereo or SAP audio status •V-Chip rating status •Picture size • Lamp mode Sample RECALL screen Understanding the auto power off feature The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature functions in ANT 1 and ANT 2 modes only. Understanding the last mode memory feature If the power is cut off while you are viewing the TV, the Last Mode Memory feature automatically turns on the TV when the power is resupplied. NOTE: You should unplug the TV’s power cord if it is possible that you will be away from the TV for an extended period of time after the power is restored. Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 87 HM94(E)082-87(8c-UseTV) 87 8/31/04, 3:25 PM (E) 46/52/62HM94 9 Using the Locks menu The LOCKS menu includes the RATING BLOCKING, CHANNELS BLOCK, INPUT LOCK, FRONT PANEL LOCK, GAME TIMER, and NEW PIN CODE features. You can use these features after entering the correct PIN code. Entering the PIN code 1. Press MENU and highlight the LOCKS menu icon. Locks Enable Rating Blocking Edit Rating Limits Front Panel Lock Game Timer New PIN Code Navigate Select Back ExitDVD RTN CH R N EXIT Off Off Off Off Channels Block Input Lock 2. Press z, which displays the PIN code entry screen. • The LOCK SYSTEM screen (below) appears if a PIN code has not been stored. Press the Channel Number buttons to enter a new four-digit code, enter the code a second time to confirm, and press ENTER. • The LOCKS ACTIVE screen (below) appears if the PIN code is already stored. Press the Channel Number buttons to enter your four-digit code and press ENTER. If the wrong PIN code is entered, the message “Incorrect PIN code” appears. Highlight RETRY and press ENTER. Enter the code again and press ENTER. When the correct PIN code is entered, the LOCKS menu opens. Locks Enable Rating Blocking Edit Rating Limits Front Panel Lock Game Timer New PIN Code Off Off Off Off Channels Block Input Lock If you cannot remember your PIN code While the PIN code entering screen is displayed, press RECALL four times within five seconds. The PIN code will be reset and you can enter a new PIN code. Changing your PIN code 1. Press MENU and highlight the LOCKS menu icon. 2. Press z to display the PIN code entering screen. 3. Enter your four-digit PIN code and press ENTER. 4. Press z to highlight NEW PIN CODE and press ENTER. 5. Press the Number buttons to enter a new four-digit code. Retype the number...