Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Toshiba
Dateigröße: 5.96 mb
Dateiname: 656fdca9-dc1a-4fd2-a613-5fbf69394a19.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
DVD player with ColorStream® IN OUT VIDEO IN from ANT CH 3 CH 4 OUT to TV UDIO L R OUT AUDIO OUT VIDEO COLORSTREAM Y Cb Cr L S-VIDEO TM VIDEO Y PB PR AUDIO L/MONO R VIDEO IN OUT ANT (75.) VIDEO 1 VIDEO 2 UDIOS-VIDEO L/MONO TV To antenna Stereo VCR 9 You will need: • three coaxial cables • two sets of standard A/V cables • one S-video cable • one pair of standard audio cables Note: You can use a standard video cable instead of the S-video cable, but the picture quality will decrease. If you use an S-video cable between the TV and DVD player/satellite receiver, make the audio connections only and remove the standard video cable. You will need: • two coaxial cables • one set of standard A/V cables • one set of component video cables • one pair of standard audio cables Note: The ColorStream inputs on this TV are for use with devices that output 480i interlaced signals ONLY. This TV will not accept or display 480p or 720p progressive scan signals or 1080i interlaced high-definition signals. If you connect a high-definition set- top receiver, 480p progressive scan DVD player, or other similar device to the TV’s ColorStream inputs, YOU MUST SWITCH THE DEVICE’S OUTPUT TO 480i INTERLACED MODE FIRST. Failure to do this will cause a poor picture or no picture to display. The unauthorized recording, use, distribution or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. AppendixUsing the TV’s Features Setting upyour TV Using theRemote ControlWelcome to Toshiba ImportantSafeguards Connectingyour TV Connectingyour TV Connectingyour TV Connecting two VCRs This connection allows you to record (dub/edit) from one VCR to another VCR. You will also be able to record from one TV channel while watching another channel. Stereo VCR / Playback To antenna TV Stereo VCR/ Recording IN OUT VIDEO IN from ANT CH 3 CH 4 OUT to TV AUDIO L R IN OUT VIDEO IN from ANT CH 3 CH 4 OUT to TV AUDIO Y PB PR AUDIO L/MONO VIDEO IN OUT ANT (75.) VIDEO 1 VIDEO 2 AUDIO S-VIDEO L/MONO R Connecting a camcorder This connection allows you to watch video materials recorded on a camcorder. VIDEOAUDIOLROUTVIDEO3L/MONOAUDIOPHONES Camcorder Front Panel of TV Connecting an audio amplifier This connection allows you to use an audio amplifier to enjoy a high- quality sound. This also allows you to use external speakers. To control the audio, turn on the TV and the stereo amplifier. Audio Amplifier TV To cable, cable box or antenna IN OUT AUDIO L R VIDEO Y PB P AUDIO L/MONO R VIDEO IN OUT ANT (75.) VIDEO 1 VIDEO 2 AUDIO S-VIDEO L/MONO R 10 You will need: • two coaxial cables • two sets of standard A/V cables Note: Do not connect the same VCR to the output and input jacks on the TV at the same time. For better picture quality, if your VCR has S- video, you can use an S-video cable instead of the standard video cable. Do not connect a standard video cable and an S-video cable to VIDEO1 simultaneously. You will need: • one set of standard A/V cables Note: For better picture quality, if your camcorder has S-video, you can connect an S-video (and standard audio cables) to VIDEO1 on the back of the TV. Do not connect a standard video cable and an S-video cable to VIDEO1 simultaneously. You will need: • one coaxial cable • one pair of audio cables The unauthorized recording, use, distribution or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Using the remote control Preparing the remote control for use With the remote control, you can operate your TV, most VCR and DVD player models, and cable TV converters together, even if they are different brands. If you will be using your TV with a Toshiba VCR or DVD player, your remote control is already programmed and ready to use. If you own different brands of VCRs, DVD players and/or converters, you first have to program your remote control. (See “Programming the remote control for use with a VCR, DVD player, or cable TV converter” on page 12.) Installing the remote control batteries To install the batteries: 1. Open the battery cover on the back of the remote control. 2. Install two “AAA” size batteries. Match the + and – signs on the batteries to the signs on the battery compartment. Note: The TV remote control may or may not operate your VCR, DVD player, or cable TV converter. Refer to the owner’s manuals supplied with the equipment to see which features are available. In addition, the original controllers may have features not available on this remote control. If you would like to continue to use these features, you may want to use the original remote control. Cautions: • Dispose of batteries in a designated disposal area. Do not throw batteries into a fire. • Do not mix battery types or combine used batteries with new ...