Stimmen - 4, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
CAPTION mode: You can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: You can watch half screen text informa tion if you want. 1-2: You may get these captions or text information by selecting either “1” or “2”. Caption “2” is usually used for a second language if available. NOTES: • Not all programs are broadcast with closed captions. Your unit is designed to provide error free closed captions from high quality antenna, cable and VCR signals. Conversely, poor quality signals are likely to result in caption errors or no captions at all. Common signal conditions which may cause caption errors are listed below: • Automobile ignition noise • Electric motor brush noise • Weak snowy reception on TV screen • Multiplex signal reception displaying picture ghosts or airplane flutter. • Playback of poorly recorded or worn VCR tapes. • If the unit displays a black box on the TV screen, this means that the unit is set to the TEXT mode. To clear screen, select [CAPTION1], [CAPTION2] or [OFF]. Make sure ... • The unit must be turned on. 1 Select “CAPTION” - TV/VCR SETUP Hit [SETUP]. TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP Press [K / L] to point to “CAP TION”. LANGUAGE [ENGLISH] B CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH 2 Select your desired caption mode - TV/VCR SETUP Hit [ENTER] repeatedly until your TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER’S SET UP desired caption menu appears. [TEXT1] or [TEXT2]) ZERO RETURN TIME SEARCH INDEX SEARCH V-CHIP SET UP LANGUAGE [ENGLISH] B CAPTION [CAPTION1] ([CAPTION1], [CAPTION2], 3 Exit the caption setting mode Hit [SETUP] to exit the menu. NOTE: • Even if there is a power failure of any kind, the unit will retain its memory for this feature. TO CANCEL THE CLOSED CAPTION SYSTEM Repeat steps 1 to 2 and select [OFF] using [ENTER]. Then hit [SETUP] to return to TV mode. - 16-EN CHANNEL SET UP CHANNEL SET UP TV/VCR Make sure ... • The unit must be turned on. AUTO CHANNEL PROGRAMMING As the initial setting, this unit has memorized all channels, including the ones not available in your area. This feature automatically puts only available channels into the memory. - TV/VCR SETUP TIMER PROGRAMMING SETTING CLOCK 1 Select “CHANNEL SET UP” Hit [SETUP]. B CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] Press [K / L] to point to ZERO RETURN TIME SEARCH INDEX SEARCH “CHANNEL SET UP”, then hit [ENTER]. 2 Begin channel scanning – CHANNEL SET UP – Press [K / L] to point to “AUTO ADD / DELETE CH (CATV) CH PROGRAMMING”, then hit B AUTO CH PROGRAMMING [ENTER]. The tuner scans and memorizes all the active channels in your area. 3 After scanning The tuner stops on the lowest memorized channel. NOTES: • When “AUTO CH PROGRAMMING” is activated where there is no TV signal input, “NO TV NO TV SIGNALS SIGNALS” will appear on the display after the completion of channel scanning. • The unit may recognize CATV channels to be TV channels if reception condition is poor. In this case, check the antenna connection and try “AUTO CH PROGRAMMING” again when reception conditions are better. • Channel memory programming is NOT necessary when connected to a cable box or satellite box. Just select the channel for cable box or satellite input (ex. CH3) on the unit, then select your desired channel on the cable box or satellite box. ADDING/DELETING CHANNELS The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.) - TV/VCR SETUP TIMER PROGRAMMING SETTING CLOCK 1 Select “CHANNEL SET UP” Hit [SETUP]. B CHANNEL SET UP USER’S SET UP V-CHIP SET UP Press [K / L] to point to “CHAN LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH NEL SET UP”, then hit [ENTER]. – CHANNEL SET UP – 2 Select “ADD/DELETE CH” Press [K / L] to point to B ADD / DELETE CH (CATV) AUTO CH PROGRAMMING “ADD/DELETE CH”, then hit [ENTER]. 3 Enter the desired channel number Press [CH. K / L] or the Number buttons until your desired channel number appears. (You can also press [K / L] to enter it.) ADD / DELETE • You must precede single-digit channel numbers with a zero (Example: CH8) (Example: 02 ... 09). • When selecting cable channels which are higher than 99, hit [+100] first, then press the last two digits. (Example: to select channel 125, first hit [+100] then hit [2] and [5].) 4 Delete (or add) it from (or into) memory Hit [ENTER]. The channel number changes to light red. The channel is deleted from memory. • To delete another channel, repeat steps 3 to 4. • If you hit [ENTER] again, the channel is memorized again. Added channel : Light blue Deleted channel : Light red 5 Exit the channel setup mode Hit [SETUP] to exit the menu. NOTE: • To confirm that channel(s) has been deleted or added, press [CH. K / L]. - 17- EN CLOCK SET UP (AUTO / MANUAL) CLOCK SET UP (AUTO / MANUAL) TV/VCR The unit clock must be set correctly so th...