Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
If you press [GAME] when the TV is off, the TV turns on and enters in Game mode. . If you adjust another picture control while in Game mode, this mode will automatically be canceled. ex. OPERATIONS Note: . If some digits appear in the corner of the screen when the unit is turned on for the first time, press [POWER] without unplugging the power cord. REMOTE CONTROL AND FRONT PANEL FUNCTION POWER button To turn TV on/off Channel number buttons CH(ANNEL) ^/Ў buttons MENU button To view on-screen menu GAME button SLEEP button DISPLAY button To display CH No./Audio Status CHANNEL RETURN button To return to previous channel MUTE button VOL(UME) ^/Ў buttons To select channels To adjust volume Infrared Sensor Window POWER button To turn TV on/off CHANNEL ^/Ў buttons To select channels VOLUME X/Y buttons To adjust volume MENU button To view on-screen menu AUDIO input jack VIDEO input jack INSTALLING THE BATTERIES Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. [BATTERY PRECAUTIONS] • Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. • Do not mix different types of batteries together (e.g. alkaline and carbon-zinc) or old batteries with fresh ones. • If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. • Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. 1 2 3 SELECTING AUDIO/VIDEO INPUT You can select external input jacks by pressing [GAME] on the remote control. 1 GAME GAME To use external input Picture: GAME Input: External 2 15 To return to TV channel GAME In the Game mode, you can use front input jacks with suitable picture adjustments for video games. (OUT) (IN) (IN) (OUT) 2 [-] GAME MODE [+] OFF ON VIDEO To cancel Game mode only 3 Picture: Customized Input: External 15 To return to TV channel GAME MENU VOL You can enter into Video mode from Game mode by adjusting a Picture control. 2 times 1 GAME GAME To use external input Picture: GAME Input: External Select “PICTURE” Note: • For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. IN jack before moving the unit. After 10 seconds Plug the incoming cable into the ANT. IN jack on the rear of the TV. *Note (DO NOT DISCONNECT FROM BOX) Some cable TV systems use scrambled signals and require a special converter to receive these channels. Consult your local cable company. OR Incoming cable from home antenna / cable company (No cable box) Incoming cable from cable company or satellite antenna Cable box or Satellite box* Cable TV signal Antenna UHF/VHF Rod Antenna (Not supplied) OR Rear of this TV OPERATIONS (Continued) CHANNEL SETTING [AUTO PRESET CHANNELS] [ADDING/DELETING CHANNELS] As the initial setting, this TV has memorized You can add or delete channels manually. all channels, including the ones not available in your area. This feature automatically puts only available channels into the memory. 1 11 MENU CH CH PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] VOL Select “CHANNEL SET” The tuner scans and memorizes all available channels in your area. CH CH VOL ADD/DELETE AUTO PRESET CH 2 22 Select “AUTO PRESET CH” 3 33 When the scanning is completed, the lowest memorized channel appears on the TV screen. Notes: . The TV distinguishes between standard TV channels and cable (CATV) channels. . The TV may recognize TV channels as CATV channels if reception condition is poor. If this happens, check the antenna connections and try steps 2 to 3 again when reception conditions are better. . If there is no TV signal input, “NO TV SIGNALS” will appear on the display after the completion of channel scanning. NO TV SIGNALS SLEEP TIMER SETTING Notes: . The display will disappear automatically after 10 seconds unless you press any buttons. . Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, press [POWER] to turn off the TV and turn it on again after about 30 minutes. CLOSED CAPTION You may view specially labeled (cc) TV programs, movies, news and prerecorded tapes, etc. with either a dialogue caption or text display added to the program. Notes: . If closed captioning is not broadcasted, you cannot receive it and nothing is displayed. . When your TV receives a special effects playback signal (i.e., Search, Slow and Still) from a VCR’s video output channel (CH3 or CH4), the TV may not display the correct caption or text. . Captions and texts may not match the TV voice exactly. . Interference may cause the closed caption system not to function properly. . The caption or text characters will not be displayed while the menu display or func- tions display is shown. . If a black box appears on the screen, this means that the TV is set to TEXT mode. To clear screen, select CAPTION [C1], [C2] or [OFF]. 22 VO...