Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
The input mode changes by pressing the button as following: • To use the jacks on the rear of the TV, select “VIDEO1”. • To use the jacks on the front of the TV, select “VIDEO2”. TV channel VIDEO1 (Rear) VIDEO2 (Front) OPERATIONS VIDEO2 input (Front) VIDEO L AUDIO R SLEEP TIMER SETTING Note: . If some digits appear in the corner of the screen when the unit is turned on at the first time, press [POWER] without unplugging the power cord. Audio Cable S-Video Cable Video Cassette Recorder Note: . The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment. Video Cable Audio Cable Video Camera Video Game Front of this TV Rear of this TV Note: . The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment. REMOTE CONTROL AND FRONT PANEL FUNCTION 1 2 3 4 5 6 7 8 9 0 +100 DISPLAY VOL CH CH VOL SLEEP CHANNEL RETURN INPUT SELECT MUTE POWER GAME MENU POWER button To turn TV on/off Channel number buttons CH ^/Ў buttons MENU button To view on-screen menu GAME button SLEEP button DISPLAY button To display CH No./Audio Status CHANNEL RETURN button To return to previous channel INPUT SELECT button To select TV or external input MUTE button VOL ^/Ў buttons To select channels To adjust volume VIDEO L - AUDIO - R MENU Y VOLUME X L CHANNEL K HEADPHONE POWER VIDEO L - AUDIO - R MENU Y VOLUME X L CHANNEL K HEADPHONE POWER CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOC ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. [EXTERNAL CONNECTION] ex. ex. Infrared Sensor Window POWER button To turn TV on/off CHANNEL ^/Ў buttons To select channels VOLUME X/Y buttons To adjust volume MENU button To view on-screen menu HEADPHONE jack AUDIO L/R input jacks VIDEO input jack Note: . For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. IN jack before moving the unit. (OUT) (IN) (OUT) (IN) (OUT) (IN) (OUT) (IN) Notes: . When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost. . To cancel the sleep timer, press [SLEEP] repeatedly until “SLEEP 0” is displayed. . The Sleep Timer Setting display will disappear automatically after 10 seconds of the operation. SLEEP 10 ANT. IN IN OUT Plug the incoming cable into the ANT. IN jack on the rear of the TV. *Note (DO NOT DISCONNECT FROM BOX) Some cable TV systems use scrambled signals and require a special converter to receive these channels. Consult your local cable company. OR Incoming cable from home Antenna / Cable Company (No Cable Box) Incoming cable from Cable Company or Satellite Antenna Cable Box or Satellite Box* Cable TV signal Antenna UHF/VHF Rod Antenna (Not supplied) OR Rear of this TV OPERATIONS (Continued) CHANNEL SETTING [AUTO PRESET CHANNELS] As the initial setting, this TV has memorized all channels, including the ones not available in your area. This feature automatically puts only available channels into the memory. 1) Press [MENU]. Using [CH ^/Ў] select “CHANNEL SET”, then press [VOL ^]. 2) Using [CH ^/Ў] select “AUTO PRESET CH”, then press [VOL ^]. The tuner scans and memorizes all available channels in your area. PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] ADD/DELETE AUTO PRESET CH 3) When the scanning is completed, the lowest memorized channel appears on the TV screen. Notes: . The TV distinguishes between standard TV channels and cable (CATV) channels. . The TV may recognize TV channels as CATV channels if reception condition is poor. If this happens, check the antenna connections and try steps 2) to 3) again when reception conditions are better. . If there is no TV signal input, “NO TV SIGNALS” will appear on the display after the completion of channel scanning. NO TV SIGNALS [ADDING/DELETING CHANNELS] You can add or delete channels manually. 1) Press [MENU]. Using [CH ^/Ў] select “CHANNEL SET”, then press [VOL ^]. 2) Press [VOL ^] to select “ADD/DELETE”. 3) Use [CH ^/Ў] to select the channel you wish to put into memory or to erase from memory. ADD/DELETE AUTO PRESET CH Note: . The menu will disappear automatically after about 10 seconds. 4) Use [VOL ^/Ў] to add or delete the channel. The added channel number will appear in light blue and deleted channel number will appear in light red. MULTI-CHANNEL TELEVISION SOUND (MTS) You can set to receive TV programs in Stereo, Second Audio or Monaural sound as you prefer. 1) Press [MENU]. Using [CH ^/Ў] select “TV SOUND”. 2) Use [VOL ^/Ў] to select [MAIN], [MONO] or [SAP] (Second Audio Program). The sound mode will be changed by pressing the button as following: [MAIN] [MONO] [SAP] PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] 3) Press [MENU] to exit the menu. Type of broadcast Menu Selection MAIN ...